48kw Rotary Vacuum Microwave Oven

Product Specification

Large 48kw 304 Stainless Steel Rotary Commercial Vacuum Microwave Oven

Vacuum Microwave dryer

Working principle
There is a direct relations between evaporation temperature andatmospheric pressure during vacuum drying oven processing, the lower the atmospheric pressure, the lower the boiling point of water. In an atmosphere,the water boiling point is 100°C.Therefore, we can dry the material under the low temperature under thevacuum conditions.
Deliver of this power will be not affect underthe vacuum conditions.Then the efficiently will be high absolutely.Also that canavoid this problem that is only the surface is dry and the gas can be dischargedeasily.
Raw material can be heated quickly by microwave heating. The energyconsumption of this kinds machine can reduce more than 10% compare with sametype machine.Therefore, it has high quality, low cost, high yield, high efficiency,stable equipment operation, etc.

Functions:

1.High Efficiency, this processing speed is four times higher than normal drying processing.
2.Uniform Heating: The machine comes with Camera for production monitoring, the machine is Micro Wave for heating, So the inner and outer of the raw material will be heated at same time. Then the heating and drying will be very uniform.
3.Easily Controlling: Because of the Micro Wave Heating, so the machine can work continuously. And the power of Micro Wave is easy adjusting without any inertia, so the processing is easy operation and easily controlling. All of the data for Micro Wave can be set by Touch screen.

Application

Microwave can penetrate into the material to heat the material inside and outside at the same time, and the heating speed is very fast; for selective heating, due to the different electrical properties of the material medium, water and material medium have different microwave absorption capabilities. materials.
The use of microwave heating characteristics can not only shorten the production cycle, improve product quality, but also save energy, and at the same time can improve the working environment without dust pollution. Therefore, the drying of chemical products is the advantage of microwave heating drying technology.
Microwave vacuum dryer is used for rapid drying and dehydration of powder, granular and paste materials, such as glass fiber, chemical raw materials, cellulose (such as hydroxyethyl cellulose, carboxymethyl cellulose, etc.), mannitol, hydroxide Nickel, lithium cobalt oxide, graphite, carbon brush, silicon carbide, calcium chloride dihydrate, activated carbon, zirconium oxychloride, zirconium oxide, copper oxide, aluminum oxide, zirconium hydroxide, zirconium carbonate, copper carbonate, manganese carbonate, Zirconium ortho sulfate, barium sulfate, ammonium zirconium carbonate, zirconium silicate, potassium zirconium carbonate, oil-based ink drier, water-based ink cross-linking water repellant, expandable graphite, various ceramic zirconia, nano-iron oxide, cobalt oxalate, etc. , the water content reaches 0.5% after drying from 40%, the drying time only takes 5~6 minutes, and the drying temperature can be controlled at 40℃~60℃.

FAQ:

1. Question: What information should be provided in order to get a quotation of microwave vacuum dryer?
Answer: Our Sintering oven can be customerized. Before we can work out a detailed quotation, we have to know the following information:
1) What are you going to dry?
2) What is the handing capacity per batch?
3) Max temperature, heat-up rate, temperature uniformity.

2. Question: What is lead time?
Answer: 30-45 working day.

3. Question: How the dryer will be delivered ?
Answer: FOB LCL or FLC for shipping

4. Question: What standard models do you have?
Answer: We have the following standard models:

5.Question: What standard models do you have?
Answer: We have the following standard models: