Automatic Dry Mix Mortar Production Line For Protection / Bonding Mortar

Product Specification

Dry powder mortar plant automatic dry mortar production line dry mix plant

Description:

Dry-mix mortar station is a production line for producing dry-mixed commercial mortar. The main components of the module generally include the following parts:

1. Wet sand pretreatment, drying and cooling;
2. Warehousing of cement, filler and additives;
3. Dosage measurement of main and auxiliary materials;
4, mixing and stirring;
5, packaging or bulk;
6. Fully automatic process computer control system.
 

Dry-mix mortar stations have different options depending on the requirements and market. Commonly used are station layout, step layout, tower layout and so on. The general process is to raise all the pretreated raw materials to the top of the raw material silo, and naturally flow out from the silo by the weight of the raw material itself, and become the final product after weighing, batching, mixing, packaging and the like. All production is done under the operation of a modern microcomputer control system. As long as the operator specifies the type and quantity of the product, all other operations are automatically performed by the control system without manual intervention. All use closed production system equipment, clean on site, no dust pollution, to ensure the health of workers. The equipment is modular structure, the production capacity can be connected with the development of the market, the batching precision is high, the use is flexible, and it is easy to expand.

Details of BH Dry powder mortar plant:

The drying system is a core of the entire mortar station and a key point in determining overall production efficiency. At present, the single-cylinder dryer has been gradually eliminated, because the single-cylinder dryer is not only large in area but also high in coal consumption, and the advantage is that it is easy to maintain. With the maturity of the three-cylinder dryer technology, the mainstream began to use a three-cylinder dryer. The overall production efficiency of the three-cylinder dryer is divided into 20, 30, 40, 50, 60 and other series. Refers to the dry sand production per hour. Generally 30 can reach 2,528 tons of output, then the mortar can be stirred is 3,540 tons.

The mixing system generally adopts a single-axis pear knife type or a double shaft without gravity. Both mixers can be used in mortar stations, but they are also very particular in terms of equipment selection. The single-axis pear knife mixing machine can stir more fully, especially some very small additives, so it can be used to produce special mortar. The disadvantage is high cost and low mixing efficiency. The double-axis gravity-free mixing host has high mixing precision. Fast speed, low energy consumption and sealable operation, suitable for the production of ordinary mortar.

Other components include metering systems, bulk and packaging systems, dust removal systems, control systems, and more.

Application:

Installation site:

Customer visit photos: