XIAN ATO INTERNATIONAL CO.,LTD
| Payment Terms | T/T, L/C |
| Packaging Details | wooden box |
| Rated Pressure | 16MPa~17.5MPa |
| Weight | 288Kg~520Kg |
| Wire Rope Diameter | 16mm~26mm |
| Flow rate | 120L/min |
| Brand Name | ATO |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Hydraulic Complete Disk Brake Drilling Rig Drawworks 35-440 KN M
1 Ton~10 Ton Peumatic Air Winch Drawworks Air Tugger
API 8C Weight Indication System / Drill Line Anchor JZ900
API 7K Pneumatic Tube Clutch For Drawworks Parts
Product Specification
| Payment Terms | T/T, L/C | Packaging Details | wooden box |
| Rated Pressure | 16MPa~17.5MPa | Weight | 288Kg~520Kg |
| Wire Rope Diameter | 16mm~26mm | Flow rate | 120L/min |
| Brand Name | ATO | Place of Origin | CHINA |
| High Light | Hydraulic Cathead Drilling Rig Drawworks ，Hydraulic Cathead Rig Floor Equipment ，Hydraulic Drilling Rig Drawworks | ||
Product Introduction:
The hydraulic Cathead is used together with the tongs to implement the make-up and break-out of the drill pipe and casing. The pulling force provided by ATO hydraulic cathead ensures premium and standard torque for drill pipe, drill collars, bit connection, or other applications.
The hydraulic cathead mostly consists of a control box and hydraulic cathead. This useful rig floor equipment provides smooth, adjustable make-up loads. Due to its hydraulic operation, the Hydraulic Cathead eliminates electrical hazards. The system can be powered by an independent hydraulic power unit or integrated into a centralized hydraulic power unit.
Working Principle:
With the hydraulic drive, the output torque can be adjusted conveniently according to the tubular diameter, with high working efficiency and safety.
The Hydraulic Cathead is installed on drill floor, normally as a backup to reduce NPT in case of Iron Roughneck failure. The wire is attached to the rig tongs to transfer the pull to make up or brake out the connection on tubulars. The wire pull (torque) can be pre-set from the operators cabin depending on make up torque and tong length.
Operating Mode:
The Hydraulic Cathead can be operated from:
√the drillers cabin
√a remote operated hydraulic control panel
√the directional control valve on the control stand
√a combination of these in accordance with clients request.
Types
They are divided into two types depending on structural features:
√Push cylinder type
√Rotary cathead type
Features
●Simple hydraulic circuit ensures trouble free performance.
●Simplified design allows long time between maintenance intervals.
●Suitable for arctic and desert environment.
●Suitable for onshore and offshore rigs.
●Remote control module enables pressure regulation
●Climate range: -40°C to +55°C
Technical Data
| Model | YM-5 | YM-8 | YM-10 | YM-10LX | YM-10C | YM-10Z | YM-16 | YM-16LX | YM-16C | YM-16Z | |
| Rated Pressure |
MPa | 16 | 16 | 16 | 16 | 16.6 | 16.6 | 16 | 16 | 17.5 | 17.5 |
| psi | 2320 | 2320 | 2320 | 2320 | 2400 | 2400 | 2320 | 2320 | 2538 | 2538 | |
| Flow rate | L/min | 120 | 120 | 120 | 120 | 120 | 120 | 120 | 120 | 120 | 120 |
| gpm | 31.7 | 31.7 | 31.7 | 31.7 | 31.7 | 31.7 | 31.7 | 31.7 | 31.7 | 31.7 | |
| Nominal stroke |
mm | 1700 | 1400 | 1650 | 1650 | 1500 | 1500 | 1620 | 1620 | 1500 | 1500 |
| in | 67 | 55 | 65 | 65 | 59 | 59 | 64 | 64 | 59 | 59 | |
| Pull rating | kN | 50 | 80 | 100 | 100 | 100 | 100 | 160 | 160 | 160 | 160 |
| US ton |
5.5 | 8.8 | 11 | 11 | 11 | 11 | 17.6 | 17.6 | 17.6 | 17.6 | |
| Wire Rope Diameter | mm | 16 | 20 | 22 | 22 | 20 | 20 | 24 | 24 | 26 | 26 |
| in | 5/8 | 3/4 | 7/8 | 7/8 | 3/4 | 3/4 | 15/16 | 15/16 | 11/32 | 11/32 | |
| Size | mm | 2232×1172×650 | 2280×1280×650 | 2342×1280×650 | 1973×710×430 | 2137×725×260 | 1588×600×520 | 2450×1590×650 | 2025×700×430 | 2314×740×260 | 1592×600×520 |
| in | 74x39x21.5 | 75x42x21.5 | 77x42x21.5 | 65x23x14.2 | 70.5x24x8.6 | 52.4×19.8×17 | 80.9×52.5×21.5 | 67x231x14 | 76x24x9 | 53×19.8×17 | |
| Weight | Kg | 288 | 305 | 345 | 530 | 360 | 450 | 420 | 760 | 400 | 520 |
| lbf | 635.5 | 673 | 761 | 1169 | 794 | 993 | 927 | 1677 | 883 | 17.2 | |
Company Details
Business Type:
Exporter,Trading Company
Year Established:
2008
Total Annual:
500000-600000
Employee Number:
20~50
Ecer Certification：
Verified Supplier
Xi’an ATO International Co., Ltd. was founded in 2008, belongs to ATO Group, which is located in Xi'an, China. We are engaged in export of drilling equipment and spare parts for upstream oil field over ten years. We mainly supply spare parts for mud pump, ... Xi’an ATO International Co., Ltd. was founded in 2008, belongs to ATO Group, which is located in Xi'an, China. We are engaged in export of drilling equipment and spare parts for upstream oil field over ten years. We mainly supply spare parts for mud pump, ...
Get in touch with us
Leave a Message, we will call you back quickly!