Product Specification

Jet Mud Mixing Pump Venturi Hopper Or Swirl Hopper Mud Mixer

 Description of Jet mud mixing pump venturi Hopper Or swirl Hopper

Also referred to as jet injection pump mud slurry mixing or mixing hopper or mixer pump. It is a combination of hoppers and pumps. Hopper type may be a scroll type or venturi. A mixing pump is widely used in the oil and gas drilling process. It is a new drilling fluid for mixing, and mixing the active sludge, when necessary. In some civil applications, mud mixing pumps also widely used bentonite mixing. Compared with the slurry agitator, the mixing fluid may be mixed throughout the slurry pump system is connected via a line, and transfer to the mixing slurry tank or any compartments.

Please check the below technical specification for your reference. And some configurations are customizable. Please contact us for more details

In some mud systems, the mud mixer is fit as integration on the mud tank skid. Some of them will be fit as separated pumps and hoppers. Some hoppers are set on a tank top and connected with the pump by the pipe. While the other mixing pumps are an assembly of pump and hopper on a separated base set beside the mud tank. Different configurations meet the different requirements or demands of users. But the final result and effect are the same. They need to produce new proper drilling fluids or drilling mud. 

How to select the mud hopper pump

The capacity of the mud hopper pump is determined by the size of the mud hopper and the pump. For example, the hopper includes a 4 inch or 6-inch port. Having a diameter of 400mm-700mm. The pump, the 75HP, 50HP, 30HP common mixing hopper of a motor drive type comprising APSB8X6, APSB6X5, and APSB5x4. The flow rate of approximately 400-1200GPM. To choose the right mixing pump, consider the flow of the entire mud system. Due to its high capacity and clean design, almost all customers like the Venturi hopper rather than the vortex hopper. In addition, the venturi cyclone funnels more compact than the funnel.

Different configurations on the mud mixing pump. In almost the mud system, the pump mixing hopper disposed of at the end of the mud tanks. They are hoppers, pumps, skid components. In some systems, there are two sets of complete mixing pumps. This means that the two hoppers and two centrifugal pumps. For some customers, they prefer the framework of separate mixing skid. Hopper may be a separate frame, may be connected to only one of all the input and output lines of the hopper. Mixing conduit connected to the pump (including the input line, the discharge line) equipped with a T-shaped port, to facilitate the transition between the tank compartment and the slurry.

In a complete mud system, how many sets of mixing pumps do we need? It's depending on the mudflow rate of the whole system. And the mixing pump can be assembled together with a shearing pump we call it a jet shearing pump. Furthermore, different users prefer different configurations on the mud system. The mixing pump skid can be fit only one mixing hopper pump or 2 sets of mixing hopper pump. And usually the 2 sets of mixing pump work simultaneously for sufficient fluids productivity

Besides the oil well drilling, the mud mixing pump is widely used in the HDD mud recycling system. The difference is usually the HDD mud mixing pump smaller than the oil drilling one.

Moreover, the APSLHseries Jet mud mixer is flexible on pump motor configuration. The motor certified by IEC, ATEX, and so on

For any interest or demand, please feel free to contact AIPU. You will get a free offer on an optimal solutions, you will get a professional proposal very soon.