Shaanxi Aipu Solids Control Co., Ltd
| Supply Ability | 30 Sets per month |
| Delivery Time | 3-4 weeks |
| Packaging Details | sea worthy pallet or frame case |
| Material | S.S304L~ Duplex 2205 |
| Strengthen | Tungsten carbide tail or coating |
| Explosion proof | For Oil&Gas |
| Non-Explosion proof | Optional for civil or engineering industry |
| Customization | Available |
| Color | Cyan, blue, green, red, yellow, orange, etc. |
| PLC | Available upon requirement |
| Brand Name | AIPU |
| Model Number | APGLW355X1258N |
| Certification | API Q1, API ISO 9001, ISO14001, OHS18001, HSE |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
3200rpm 154GPM Horizontal Drilling Mud Decanter Centrifuge
1 Year Warranty Stainless Steel Sludge Dewatering Centrifuge
Anti Abrasive High Speed Drilling Mud Decanter Centrifuge
APLW Closed Circuit Drilling Mud Decanter Centrifuge
Product Specification
| Supply Ability | 30 Sets per month | Delivery Time | 3-4 weeks |
| Packaging Details | sea worthy pallet or frame case | Material | S.S304L~ Duplex 2205 |
| Strengthen | Tungsten carbide tail or coating | Explosion proof | For Oil&Gas |
| Non-Explosion proof | Optional for civil or engineering industry | Customization | Available |
| Color | Cyan, blue, green, red, yellow, orange, etc. | PLC | Available upon requirement |
| Brand Name | AIPU | Model Number | APGLW355X1258N |
| Certification | API Q1, API ISO 9001, ISO14001, OHS18001, HSE | Place of Origin | CHINA |
| High Light | Drilling Mud Decanter Centrifuge ，Tungsten Carbide Drilling Mud Decanter ，APGLW Tungsten Decanter Centrifuge | ||
APGLW355x1258N is high speed centrifuge decanter used in drilling fluids process for oil and gas drilling. The centrifuge can be used separated in solids control system, or used together with the middle speed centrifuge. Besides fine cuttings removal, the APGLW355x1258 centrifuge can get the barite recycled.
The working principle of horizontal screw centrifuge is very simple. It has been known by the public for a century. The drum and screw are supported by separate suspension.The material enters through the inlet pipe and accelerates into the core drum body through the drum.
Centrifuge here is also referred as the centrifuge decanter or decanting centrifuge. High speed centrifuge speed is 2800-3200rpm. And for the high speed centrifuge, suggest the VFD high speed centrifuge. Centrifuge is set after the mud cleaner or the desilter. As we know the desilter cone theoretically remove solids larger than 15 microns. While centrifgue can remove 2-7 microns cuttings. The high speed centrifuge can get rid of 2-5 microns particles.
AIPU 355 centrifuge holding drum sized 355x1258mm. Means the drum diameter and length. The main motor is 30kw or 37kw according to different demand, the back drive motor can be 7.5kw and 11kw accordingly. While the feeding pump (submersible slurry or the screw pump) is usually 7.5kw. The material of wet parts can be S.S304L or the Dupex 2205 stainless steel
The maximum flow rate of the APGLW355 centrifuge is 35m³/h at rate of 3200rpm. However, when the speed varies the centrifuge flow rate varies, too.
From the raw material to the test prior to delivery, AIPU provide all issues high quality. And we implement the strict QC regulations. Centrifuge is a rather mature equipment in drilling fluids process. Compared to other brand or models, AIPU centrifuge is more competitive and easy to maintain. As solids control manufacturer, we are rather professional and providing the optimal solutions.
And AIPU provides the customization service on many different aspects. Such as the color, the base design, the motor electrical sytem, the necessary certificates, etc.
Main spare parts including the bearing, oil seal, the coupling, the cushion base, the fuse, etc. These are rather easy to get in the market and cost little.
| Flow rate | 154GPM |
| Drum diameter | 355mm |
| Drum length | 1258mm |
| Lambda ratio | 3.5 |
| Drum shape | Conical |
| Speed | 3200rpm |
| Main motor | 30kw (Customizable) |
| Back drive motor | 7.5kw (Customizable) |
| Max. capacity | 35m³/h |
| Separation point | 2~5microns |
| Separation factor | 2035G |
| Feeding pump | 7.5kw (Submersible or screw) |
| Weight | About 3000kg (Vary if VFD and different motor size) |
As we introduced before, the centriuges can be used not only in drilling fluids process. They can be used in many industry. Related to oil and gas industry or the drilling industry, they can be used in slurry separation, the sludge treatment, the waste management, and so on.
And in drilling fluids system, they are used to recycle or relcaim the barite, too. When we use both middle speed centrifuge and high speed centrifuge, the high speed one will be set behind the middle speed one.
Do you have any demand on centrifuges? No matter for solids control or for drilling waste management,or for the slurry separation and sludge treatment. Please feel free to contact us.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2013
Total Annual:
10000000-12000000
Employee Number:
60~100
Ecer Certification：
Active Member
AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system. All items can be used in oil and gas drilling, the oil sludge treatment, the HDD ... AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system. All items can be used in oil and gas drilling, the oil sludge treatment, the HDD ...
Get in touch with us
Leave a Message, we will call you back quickly!