Shaanxi Aipu Solids Control Co., Ltd
| Supply Ability | 30 Sets per month |
| Delivery Time | 3-4 weeks |
| Packaging Details | sea worthy pallet or frame case |
| Speed | High speed or optional |
| Drive | Fixed or VFD |
| Material | S.S304L~ Duplex 2205 |
| Strengthen | Tungsten carbide tail or coating |
| Explosion proof | For Oil&Gas |
| Customization | Available |
| Color | Cyan, blue, green, red, yellow, orange, etc. |
| PLC | Available upon requirement |
| Installation | Horizontal |
| Use | In mud process |
| Brand Name | AIPU |
| Model Number | APLW |
| Certification | API Q1, API ISO 9001, ISO14001, OHS18001, HSE |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
1 Year Warranty Stainless Steel Sludge Dewatering Centrifuge
APGLW Tungsten Carbide Tail Drilling Mud Decanter Centrifuge
Anti Abrasive High Speed Drilling Mud Decanter Centrifuge
APLW Closed Circuit Drilling Mud Decanter Centrifuge
Product Specification
| Supply Ability | 30 Sets per month | Delivery Time | 3-4 weeks |
| Packaging Details | sea worthy pallet or frame case | Speed | High speed or optional |
| Drive | Fixed or VFD | Material | S.S304L~ Duplex 2205 |
| Strengthen | Tungsten carbide tail or coating | Explosion proof | For Oil&Gas |
| Customization | Available | Color | Cyan, blue, green, red, yellow, orange, etc. |
| PLC | Available upon requirement | Installation | Horizontal |
| Use | In mud process | Brand Name | AIPU |
| Model Number | APLW | Certification | API Q1, API ISO 9001, ISO14001, OHS18001, HSE |
| Place of Origin | CHINA | ||
| High Light | Horizontal Drilling Mud Decanter ，3200rpm Drilling Mud Decanter ，3200rpm 154GPM Decanter Centrifuge | ||
Decanter centrifuges also referred to decanting centrifuge or centrifuge decanter. In drilling mud process for oil & gas drilling there are middle speed centrifuge and high speed centrifuge. They can be designed as fixed frequency and variable frequency centrifuge.
Now in stock centrifuge high speed one which model number is GLW355X1258 with 3200rpm speed and 35m³/h capacity. The bowl diameter is 355mm, while length is 1258mm. The minimum separation point is 2 micron and its separation factor is 2035G
Centrifuge main motor is 30kw (40hp), accessory motor is 7.5kw. This centrifuge in stock is fixed frequency one. Upon clients’ demand we can configure the VFD panel for it. Then the speed will be 0~3200rpm and VFD will lead better protection on motor as well as whole centrifuge
All raw materials are high quality. Such as the screw conveyor, bowl, the support frame, the surface paint, the motor, the control panel, etc.
Usually, finish one set centrifuge may take 30 days. But now, only in 1 week we’ll get all things cleared and make it arrive at port. For other requirements or options we’ll give you optimal solution soonest.
Finally, our aftermarket will definitely satisfy you on soon response as 7×24 technique support. The centrifuge is rather mature to save more cost on wearing parts as well as maintenance
Main spare parts including the bearing, oil seal, the coupling, the cushion base, the fuse, etc. These are rather easy to get in the market and cost little.
| Flow rate | 154GPM |
| Drum diameter | 355mm |
| Drum length | 1258mm |
| Lambda ratio | 3.5 |
| Drum shape | Conical |
| Speed | 3200rpm |
| Main motor | 30kw (Customizable) |
| Back drive motor | 7.5kw (Customizable) |
| Max. capacity | 35m³/h |
| Separation point | 2~5microns |
| Separation factor | 2035G |
| Feeding pump | 7.5kw (Submersible or screw) |
| Weight | About 3000kg (Vary if VFD and different motor size) |
As we introduced before, the centriuges can be used not only in drilling fluids process. They can be used in many industry. Related to oil and gas industry or the drilling industry, they can be used in slurry separation, the sludge treatment, the waste management, and so on.
And in drilling fluids system, they are used to recycle or relcaim the barite, too. When we use both middle speed centrifuge and high speed centrifuge, the high speed one will be set behind the middle speed one.
Do you have any demand on centrifuges? No matter for solids control or for drilling waste management,or for the slurry separation and sludge treatment. Please feel free to contact us.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2013
Total Annual:
10000000-12000000
Employee Number:
60~100
Ecer Certification：
Active Member
AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system. All items can be used in oil and gas drilling, the oil sludge treatment, the HDD ... AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system. All items can be used in oil and gas drilling, the oil sludge treatment, the HDD ...
Get in touch with us
Leave a Message, we will call you back quickly!