Product Specification

Oilfield Rig Mats Polyurethane Durable Lighter And Easy To Installation

Drill floors require an extreme level of safety. Especially securing friction on the deck is a high priority as mud, grease, oil, water, etc, creates a very slippery milieu.
Oil rig floor mats we manufactured are mainly used in oilfield, engineering construction, etc. The mat is made of Polyurethane ( PU ) Rubber + Steel Nails. Compared to another common anti-slip mats, such as riffled plate, wood plate, etc, the PU mat has great features of anti-slip. The surface of the mat is designed with vertical and horizontally arranged sewage notch, the oil fouling and water spots can discharge timely.

Rig matting board is usually made with wood and steel frame. Sometimes, the mating board can be rubber, polyurethane, or fiberglass material. The wood is Larch or Conifer Pine, and the steel frame is made of a high-quality hot rolled carbon steel beam. Steel beam can be H beam or I beam. Different sizes can be manufactured by Aipu solids control according to the customers’ request.

Oilfield drilling rig mats specifications

Main Features
1) Available in any color with identified danger zones.

2) Aggressive aggregate embedded to create traction enhanced surface.

3) Carton steel or SS nails embedded for added traction.

4) Very durable and resistant to fluids.

5) Channels on the surface allow for fluid runoff.

6) Custom service according to requirements.

Oilfield drilling rig mats standard
The executive code includes wooden materials, hot rolled steel beam, metal welding quality requirements, anti-corrosive wood, drilling site layout, drilling equipment basic specification, and so on
Suggested size including 5x2m, 3x2m, and 4x2m. 5x2m is suitable for the base. The steel beam should be I beam larger than 16# or an H beam larger than 175#. Wood material strength should be higher than 32.8MPa.

The wood beam on mats should be higher than the steel frame 10-20mm both upside and backside. Steel beam surface painting oil film thicks above 150microns. The welding quality should conform with GG/T12467.4 or equivalent

Oilfield drilling rig mats application

• Used as the equipment foundation for drilling rig, Triplex mud pumps, Mud tanks, Power rooms, class="lazy" src="/myres/images/load_icon.gif" data-original house, Oil tanks, Water tanks, in order to ensure the steadiness when the drilling equipment is placed at the drilling sites.
• Rig matting is suitable for all kinds of ground surfaces, especially for loose formation. Directly putting on the ground is available because of the large contact area, lower limits to the ground. When the ground loading capacity is≥06Mpa, and ground flatness ≤ 40mm, the rig matting can be working.
• It replaces the traditional concrete foundation, reducing the drilling costs, improving economic efficiency, and saving the land.

How to test and inspect oilfield drilling rig mats
Put the mattings on flat ground with strength loading over 0.15MPa. Then lay materials on the mats gradually last 10 minutes. During the whole, test check if any deformation or cracking on the rig mats.
The spot inspection is based on 40 panels per batch. Each batch mat should select 2 panels by chance. If any non-conformance happened, there should be another check on the 2 panels again. If still any non-conformance, we define this batch mats are not qualified.

We will deliver about 100 panels rig matting board to an African oilfield drilling site. End-user requests strictly on whole quality and inspection. They will despatch SGS people to inspect mats per their requirements and agreement

Aipu oilfield drilling rig mats advantages

The raw material. Including the steel and the wood. Selected strictly according to executive code.

Wood will be processed under the anti-corrosion procedure.

We do the inspection and all processes step by step to ensure users' high-performance products.

Painting the rig mats with famous brand marine coating oil, which is high anti-corrosive.

Custom-built size and design as per clients' demand.

Aipu can produce rig mattings according to clients' certain requirements.