Gas Flare Ignition Device Oil And Gas Drilling Gas Flamer Mud Gas Separator

Product Specification

APFI ignitor connected to Mud gas separator for drilling mud system used in oilfield

APFI flare ignition device is also referred to as a flare ignitor or a gas flame. Ignitor for liquid-gas separators is an environmentally-friendly discharge torch that is exclusively produced by our company. It is suitable for ignition of long distances and air and toxic gas-burning places that cannot be reached by humans. It is especially suitable for oil production(gas) overflow of gas or oil, natural gas, and drilling operation in station gathering pipelines, and long-distance ignition of natural gas separated by liquid-gas separators during killing operations eliminate the unsafe factors of manual ignition. Avoid explosions that may occur when natural gas is mixed with air and H2S-containing gases that can harm humans and equipment.

Technical specification of AIPU flare ignition device

Please check below technical specifications for your reference. And some configuration is customizable. Please contact us for more details

Why do we need the APFI ignitor?

The flare ignition device is used to light the waste gas in the oil and gas industry. It is connected with poor boy degasser, which separates gas from drilling mud and vent gas to flare ignition device

Burning harmful or poisonous gas by igniter will eliminate threats to the environment and safety. Every flare ignition device will be operated together with a mud gas separator. They will be connected with the vent line or gas discharge line. They are widely used in oil and gas drilling.

Besides traditional flare igniter, Aipu also manufactures the ignition device with solar panels. The battery will be charged under sun energy. This is more environmental-friendly with green energy.

For each flare ignition device, we’ll configure the burner, the control panel, the joint connection, a small tank with LNG. Between the ignitor and the fuel line, there is a flame arrestor to ensure safety during ignitor operation

What is the main configuration of the flare ignition device?

There is the arrestor, the torch, the flame pin, the control panel, the fuel tank, or the connection line. If we use diesel oil as the fuel, there will be no diesel tank but the connection line between the ignitor and the fuel tank at the site.

Some flare ignition device is powered by a solar panel. This configuration is more and more popular. It's more environmental-friendly and convenient to get the power source.

What are the types of flare ignitors?

Based on the installation way, there are vertical type and horizontal type. That means the torch port direction is parallel to the ground or normal to the ground.

Based on the fuel material, there are LNG flare ignition devices or the diesel flare ignitor. Considering the power supply, there are the electrical gas flame and the solar gas flame.

If consider the control pattern, there are a fixed control panel and a remote control gas flame. Besides the above division, we can customize the gas flame according to the user and the practical working condition. Such as we made the extra-high gas flame for an oil drilling company. The overall height is about 5m.

Flare Ignition Device Feature:
1. Stainless steel burner torch

2. Mature design with successful job site performance

3. Conventional battery or solar battery

4. Custom built available

For any questions or demands, please feel free to contact AIPU solids. You will get a free offer on an optimal solution, you will get a professional proposal very soon.