Diesel Fuel Carbon Steel Flare Ignition Device Vertical Installation

Product Specification

Diesel Fuel Carbon Steel Flare Ignition Device Testing Successfully

Summary of flare ignition device  

Aipu solids control manufacture high quality well drilling fluid flame ignitor.

The flare ignition device is used to light the waste gas in oil and gas industry. It is connected with poor boy degasser, which separate gas from drilling mud and vent gas to flare ignition device

Burn the harmful or poisonous gas by igniter will eliminate threaten to environment and safety. Every flare ignition device will be operated together with mud gas separator. They will be connected with the vent line or gas discharge line. They are widely used in oil and gas drilling.
Besides traditional flare igniter, Aipu also manufacture the ignition device with solar panel. The battery will be charged under sun energy. This is more environmental-friendly with green energy.

Technical specification of AIPU flare ignition device

Flare ignition device specification

AIPU model of flare ignition device APFI20/3, AP is the short name of AIPU.
Torch diameter on top is 200mm, stainless material, well welding between stainless and carbon steel material.
The burner height is 3 meters including torch on top, there is back valve installed on bottom of gas inlet to avoid gas flow back for safety purpose.
There is a control panel that can be move by hand, a junction box installed on flare ignition device with high standard of explosion proof and protection standard.
Color of the ignitor can be customized. The standard is red for a warning color.

Flare ignition device working

The gas is carried by pipeline to the safe burner inlet.
Connect and turn on flare igniter current conversion and a voltage amplifier circuit
Open the gas tank and operate the electronic igniter and ignite the fire tube. (the first stage ignition)
Open the gas vent gate cutting, the burning fire tube will ignite gas. (the second stage ignition)
Turn off the gas tank and extinguish the fire tube, combustible gas burning completely

Flare ignition device operation tips

We must prevent any damage on ignition wire during transportation, hoisting, etc.
When installing burner, we should be far away from fire.
The bottom of the burner must be fixed firmly, if required by the guy rope
Flare ignition device should be placed in a good environment to protect the electronic components and ensure good performance.
Flare ignition device is usually combined with mud gas separator in drilling mud system.

Why do we need the APFI flare ignitor?

The flare ignition device is used to light the waste gas in the oil and gas industry. It is connected with poor boy degasser, which separates gas from drilling mud and vent gas to flare ignition device

The flare igition device is used to light the waste gas in the oil and gas industry. It is connected with poor boy degasser, which separates gas from drilling mud and vent gas to flare ignition - device

Burn the harmful or poisonous gas by ignitor will eliminate threats to environment and safety. Every flare ignitor will be operated together with mud gas separator. They will be connected with the vent line or gas discharge line. They are widely used in oil and gas drilling.

Besides traditional flare ignitor, Aipu also manufactures the ignition device with a solar panel. The battery will be charged under sun energy. This is more environmental-friendly with green energy.

For each flare ignition device, we’ll configure the burner, the control panel, the joint connection, a small tank with LNG. Between the ignitor and the fuel line, there is a flame arrestor ensure the safety during ignitor operation

And now, as a matured product it has been extensively used in petroleum drilling engineering.

What are the types of flare ignitor?

Based on the installation way, there are vertical type and horizontal type. That means the torch port direction is parallel to the ground or normal to the ground.

Based on the fuel material, there are LNG flare ignition device or the diesel flare ignitor. Considering the power supply, there are the electrical gas flame and the solar gas flame.

There are the fixed control panel and the remote control gas flame. Besides the above division, we can customize the gas flame according to the user and the practical working condition. Such as we made the extra-high gas flame for an oil drilling company. The overall height is about 5m.

For any question or demand, please feel free to contact AIPU solids. We will provide you with professional technical solutions