Product Specification

APG Oil Drilling Mud System Submersible Screw Pump

APG Submersible Screw Pump Application:
A submersible screw Pump is an ideal pump used to feed drilling fluids to decanter centrifuge since drilling fluids are pushed to proceed along axial direction evenly. Therefore, the inner flow speed is kept low, volume unchanged, and pressure stable so that vortex and agitation are prevented. Screw Pump Supplier is useful for wet mud drilling waste management and cuttings transportation.

Below technical specification for your reference.

Submersible Screw pumps mainly consisted of the discharge port, the stator, the rotor, the flexible section, middle axis, suction room, seal, bearing, driveshaft, bearing body. Among these parts, the wearing parts are the rotor and stator. The screw pump wet parts can be made of stainless, steel, and high-quality rubber. According to different fluids content and property, we'll provide a certain configuration on screw pumps. For example, for the abrasive material, we kindly suggest using special rubber instead of stainless steel. As we know, the S.S can't adapt abrasive material but corrosive material. Compared to other pumps, screw pump is not easy to lead swirl. This helps much to maintain pump capacity. It is not sensitive to viscosity so it is capable to transfer material with high viscosity

How to select a screw pump?

Yes. It's depending on the centrifuge flow rate request. The screw pump APG series holding a capacity from 8m³/h-350m³/h. Besides the solids control system, the screw pump can be used in other applications, too. For the drilling mud process, the centrifuge feeding pump is a rather typical use of a screw pump. Compared to other pumps, screw pumps holding shorter life or operation life considering the wearing parts. But it's a compact and high effect, many users prefer it then

Screw Pump Features & Benefits:
1. The screw pump shaft is made of stainless steel and even the whole pump is possible to be made of it.
2. The stator is made of elastomeric material, so it gives the pump a more competitive advantage than the other pump to transfer the fluids of high viscosity and fluids with hard suspended particles content.
3. The advantages of a screw pump are compact structure, small volume, and easy maintenance. Rotor and stator, wearing parts of this pump, are convenient to replace.

For any interest or demand on the centrifuge screw pump, just feel free to contact us. 

A: How about the quality?

Q:we use high quality raw material for production, and 100% QC in producing process before the goods being packed up. we sincerely expect to work with you for long and stable time.

A: What's your warranty?

Q: we have 1-2years warranty for different item.

A: Could I put my own logo on it?

Q: Sure, we can make your logo after you give us your authorization

A: If I have my ideas, do you have persons to design according to my concept?

Q: Certainly, our technology team is willing to do it for you.

A: What’s your payment term?

Q: Paypal, Western Union, TT and LC at sight.

A: What's your shipping ways?

Q: For sample, we will choose express(DHL, UPS, TNT or FEDEX). For bulk goods, it will depends on you, by air or by sea via Ningbo or Shanghai port.

A: can I get a sample to check your quality and how long i can get samples?

Q: yes,very welcome and sample will be finished about 7days.