Product Specification

55kW Electricity Driven Centrifugal Slurry Semi-Submerged Pump Casting Iron

Centrifugal Slurry Semi-Submerged Pump is an ideal equipment to transfer mud from mud pit or mud storage tank to feed shale shaker or tank. The vertical design makes the pump a best option for mud pit fluids transfer.

Many types of pumps are used for pumping slurries, but the most common slurry pump is the centrifugal pump. A slurry pump is a centrifugal type, specifically designed for hydraulic conveyancing of abrasive and often corrosive solid particles within a carrier fluid.

Centrifugal Slurry Semi-Submerged Pump by AIPU industrial slurry pumps are non-clog pumps designed for high solids industrial pumping applications. Our patented pump technology outperforms all centrifugal, vortex, and positive displacement pumps in a variety of the most difficult pumping applications.

How to select the Centrifugal Slurry Semi-Submerged Pump?

 
For the pump feeding centrifuge, we need to consider the centrifuge flow rate. For the pump feeding shaker in the HDD mud system, we should consider the whole mud system flow rate. And then the submersible length is another issue that affects configuration or design. We can supply a pump to meet submersible depths up to 3m. How do achieve this? By extension, the pipe is connected to the input port.
 

Centrifugal Slurry Semi-Submerged Pump installation

If the pump installs onto the mud tank, there is a level plate on the pump under the motor, the plate is designed to bolt on the tank top. The pump can be installed into a mud pit as well with a built simple platform to bolt the pump level plate. The vertical design is maximized to reduce its footprint especially when it’s installed on the tank top. With the adjustable size, the ultra-recessed rotor can pass the largest material in the industry, ensuring maximum uptime when pumping large solids.

Below are technical specifications for your reference.
 

insulated copper conductor flexible cable

Thermal Over-Load Protection

Moisture detect sensor

Cooling Jacket available on request

Special MOC available on request

Application

Pumping of Slurry/ Mud/Sewage water/wastewater

Removal of slurry with suspended solids

Effluent transfer

Centrifugal Slurry Semi-Submerged Pump features

Self-suction design is maximum increased pump efficiency. The submersible pump is a highly effective pump that compares centrifugal pump, screw pump, diaphragm pump, or multiple centrifugal pumps. All bearings above fluids make pump-free maintenance nearly zero cost for spares. Depth from level plate to pump suction point is customized from 1.0 to 1.8 meters. Standard depth 1.3 meters without special request.

More details of Centrifugal Slurry Semi-Submerged Pump

 
The submersible slurry pump is another kind of centrifugal pump. But it's more durable and strong than a common pump. It can transfer many different kinds of hard materials, including sand, cement, particles, shale, etc. So, it meets many requirements in different industries. The main structure includes an impeller, pump case, shaft, bearing, motor, supporting frame, etc.
 
Handling capacity is from 30m³/h to 120m³/h. The pump performance includes flow rate, heat, and pressure. They will affect each other on the performance. 
 
Drilling fluids are transferred to desilter cones by a centrifugal pump from the desander tank or compartment. The Desilter cone is fed by a desilter pump with fluids out of the desander. Under pump pressure, the fluids run into cones and flow with centrifugal force. Then the heavy particles will deposit down and push out of the cone drop in Apex. Particles larger than 15 microns will be separated from drilling mud.
 
For HDD and other mud system in civil construction, the slurry pump can be set over a mud pit on a frame or support bar. The pump inlet port is submerged in a pit or tank to transfer drilling mud into a shaker. While in the oil drilling mud system, the slurry pump will be set on a desilter tank or compartment. If we have 2 sets of centrifuges, then 2 sets of slurry pumps are requested. Some users prefer the screw pump since the screw pump is the progressive pump. But the submersible slurry pump is more durable and high resistant to sand or cuttings in the drilling fluids. Moreover, the bearing and connection between the motor and pump body are above the liquid level, so there is no need to maintain the pump. Higher efficiency and lower cost.
 

Please contact us freely for slurry pump or other pump inquiries, you will get a professional proposal very soon.