Shaanxi Aipu Solids Control Co., Ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 100 Sets per month |
| Delivery Time | 1 week |
| Packaging Details | Sea worthy |
| Driven | By electricity (optional) |
| Wet part material | S.S, Alloy, Etc. |
| Condition | New |
| After-sales service provided | In time and professional. Spare parts in stock |
| Application | Oil and gas drilling, on shore and offshore platform |
| Color | Customizable |
| Power system | 380V,400V,415V,440V, 460V,480V,600V, 660V, Customizable |
| Brand Name | AIPU Solids |
| Model Number | APG |
| Certification | API, ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
Drilling Fluid Rotary Submersible Screw Pump 2.5Mpa 123m3/H Capacity
1.2Mpa Solids Control Well Drilling Fluid Screw Pump
Drilling Fluid Rotary 2.5Mpa 123m3/H Single Screw Pump
Oil Drilling Decanter Centrifuge Single Screw Pump
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 100 Sets per month |
| Delivery Time | 1 week | Packaging Details | Sea worthy |
| Driven | By electricity (optional) | Wet part material | S.S, Alloy, Etc. |
| Condition | New | After-sales service provided | In time and professional. Spare parts in stock |
| Application | Oil and gas drilling, on shore and offshore platform | Color | Customizable |
| Power system | 380V,400V,415V,440V, 460V,480V,600V, 660V, Customizable | Brand Name | AIPU Solids |
| Model Number | APG | Certification | API, ISO |
| Place of Origin | China | ||
| High Light | Centrifuge Single Screw Pump ，Oil Drilling Single Screw Pump | ||
APG Screw pump for decanter centrifuge in oil drilling mud system
APG Screw pumps are for decanter centrifuge feeding. Compared to submersible slurry pump, such pump is higher price and it's horizontally installed instead of vertical position. It's a positive-displacement pump consisting one or more screws to move fluid or solids along the axis. For drilling mud process system, screw pump is usually the single screw rod.
Screw pumps mainly cosisted of discharge port, the stator, the rotor, the flexible section, middle axis, suction room, seal, bearing, drive shaft, bearing body. Among these parts, the wearing parts are the rotor and stator. The screw pump wet parts can be made of Stainless, steel, and the high quality rubber. According to different fluids content and property, we'll provide the certain configuration on screw pumps. For example, the abrasive material we kindly suggest use the special rubber instead of stainless steel. As we know, the S.S can't adapt abrasive material but corrosive material.Compared to other pumps, screw pump is not easy to lead swirl. This help much to maintain pump capacity. It is not sensitive to viscosity so it is capable to transfer material with high viscosity
Screw pump transfer drilling fluid via the screw conveyor rotation. Center screw pole is the positive pole, the two sides screw conveyor are negative pole. Negative poles rotate at opposite direction with positive pole.
Actually when the screw axis is rotating, lower V room will become large. V room will close against fluid sucked. Closed room will be pushed forward along axle. Then new suction cavity generates on suction end. One and one closed cavity move forward, the fluid will be pressed out.
How to select screw pump? Yes. It's depending on the centrifuge flow rate request. The screw pump APG series holding capacity from 8m³/h-350m³/h. Besides the solids control system, screw pump can be used in other application, too. For drilling mud process, the centrifuge feeding pump is rather typical use of screw pump. Compared to other pumps, screw pump holding shorter life or operation life considering the wearing parts. But it's compact and high effect, many users prefer it then
Plese check below technical specification for your reference.
| Model | Speed | Capacity | Pressure | Head | Power | Outlet flange | Permitted solids Dia. | Fiber length |
| APG35-2 | 960rpm | 8m³/h | 1.2Mpa | 120m | 4kw | 50mm | 3mm | 40mm |
| APG40-1 | 12m³/h | 0.6Mpa | 60m | 4kw | 65mm | 3.8mm | 45mm | |
| APG40-2 | 12m³/h | 1.2Mpa | 120m | 5.5kw | 65mm | 3.8mm | 45mm | |
| APG50-1 | 20m³/h | 0.6Mpa | 60m | 5.5kw | 80mm | 5mm | 50mm | |
| APG50-2 | 20m³/h | 1.2Mpa | 120m | 7.5kw | 80mm | 5mm | 50mm | |
| APG60-1 | 30m³/h | 0.6Mpa | 60m | 11kw | 100mm | 6mm | 60mm | |
| APG60-2 | 30m³/h | 1.2Mpa | 120m | 15kw | 100mm | mm | mm | |
| APG70-1 | 720rpm | 45m³/h | 0.6Mpa | 60m | 11kw | 125mm | 8mm | 70mm |
| APG70-2 | 45m³/h | 1.2Mpa | 120m | 15kw | 125mm | 8mm | 70mm | |
| APG85-1 | 65m³/h | 0.6Mpa | 60m | 15kw | 250mm | 10mm | 80mm | |
| APG85-2 | 65m³/h | 1.2Mpa | 120m | 18.5kw | 150mm | 10mm | 80mm | |
| APG105-1 | 145m³/h | 0.6Mpa | 60m | 22kw | 200mm | 15mm | 110mm | |
| APG105-2 | 145m³/h | 1.2Mpa | 120m | 30kw | 200mm | 15mm | 110mm | |
| APG135-1 | 350m³/h | 0.6Mpa | 60m | 37kw | 250mm | 20mm | 150mm | |
| APG135-2 | 350m³/h | 1.2Mpa | 120m | 45kw | 250mm | 20mm | 150mm |
For any interes or demand on the centrifuge screw pump, please feel free to contact us. You will get free offer very soon.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2013
Total Annual:
10000000-12000000
Employee Number:
60~100
Ecer Certification：
Active Member
AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system. All items can be used in oil and gas drilling, the oil sludge treatment, the HDD ... AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system. All items can be used in oil and gas drilling, the oil sludge treatment, the HDD ...
Get in touch with us
Leave a Message, we will call you back quickly!