Techcore Oil Tools Co.,Ltd,
| Supply Ability | 50sets/month |
| Delivery Time | 30-45 days |
| Packaging Details | Polly wood, suitable for sea and air shipment |
| Tool Type | Rupture Disc Safety Circulating Valve |
| Application | Oil & Gas Well Downhole Testing Service |
| Material | Alloy steel |
| Size | 5" |
| Standard | NACE MR0175 |
| Working Condition | H2S service above 175oF |
| working pressure | 15000psi / 105 Mpa |
| Connection | IF Box X Pin |
| Brand Name | Techcore |
| Model Number | RD SAFETY CIRCULATING VALVE |
| Certification | ISO, BV |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Multi Cycle Downhole Oil Tools OMNI Valve Downhole Well Testing Equipment
Slim Hole Sleeve Type Drain Valve Downhole Drilling Tools 3 7/8" 15000 PSI
Full Bore Retrievable Packer Downhole Oil Tools 9 5/8" 10000 PSI Well Testing
Downhole Retrievable Packer Drill Stem Test Mechanical Packer 3 1 / 2"
Product Specification
| Supply Ability | 50sets/month | Delivery Time | 30-45 days |
| Packaging Details | Polly wood, suitable for sea and air shipment | Tool Type | Rupture Disc Safety Circulating Valve |
| Application | Oil & Gas Well Downhole Testing Service | Material | Alloy steel |
| Size | 5" | Standard | NACE MR0175 |
| Working Condition | H2S service above 175oF | working pressure | 15000psi / 105 Mpa |
| Connection | IF Box X Pin | Brand Name | Techcore |
| Model Number | RD SAFETY CIRCULATING VALVE | Certification | ISO, BV |
| Place of Origin | CHINA | ||
| High Light | Downhole Testing Service Safety Circulating Valve ，Rupture Disc Safety Circulating Valve ，Downhole Testing Service Circulating Valve | ||
Fracturing Service Downhole Tools RD Circulating Valve 15000psi
The Rupture disk (RD) Safety circulating valve is a tool used in oil & gas well downhole testing service, well completion operation and fracturing operation. The RD safety circulating valve is designed with functions both a safety valve and circulating valve.
The circulating vavle functions as a safety valve when the annulus pressure reaches a predetermined value. At that pressure, the valve isolates the workstring below the tool and establishes communication between the annulus and the workstring above the tool.
This valve converts into a circulating valve when the ball valve section is removed and attach a lower adapter called RD Circulating Valve.
RD Circulating valve is the same as RD Safety circulating valve except short of ball valve section, the annulus pressure made RD burst and the pressure goes into RD hole and push circulating mandrel forward, then open the circulating ports.
Specification of RD circulating valve
| Nominal-Tool Sizein. | OD in. (cm) | ID-in. (cm) | Thread-Connections | Service Temperature 'F(“C) | Length in.(cm) | Tensile Rating" Ib(kg) | Working Pressure" psi (bar) | Flow-area in.2 (cm2) | Number of Ports |
| 3 7/8 | 3.90(9.91) | 1.80(4.57) | 27/8CAS | 450(204) | 70.90(180.09) | 187,366(84989) | 15,000(1034) | 3.14(20.26) | 4 |
| 5.00 | 503(12.78) | 2.28(5.79) | 37/8CAS | 450(204) | 68.02(172.77) | 328,000(148781) | 15,000t(1034) | 3.14(20.26) | 4 |
﹡HSE﹡Safety Testing instructions of RD Circulating Valve
1. When running each pressure test, you must increase pressure gradually. When the pressure is up to 20MPa, hold on for one minute, then every 10MPa keep it for one minute until the rating pressure;
2. During doing the pressure test, the tool should be placed in the test pit and cover the protecting board on the pressure test plug.
3.During the whole process, make sure the entire test operator keep away from plug and joint which may lapse.
4.Test area should set isolation, others except operator not allowed to enter test area.
5.If there is anybody in the test area, it should set isolation, avoiding test production fly off the test area.
* Drill stem testing tools are available for cased hole, open hole and slim hole including:
| Name | Size | Specification | Well type |
| RTTS Packer | 4 1/2”-20” Casing | 70Mpa, 400F | cased hole |
| Full bore mechanical setting packer | 5"-18 3/8" Casing | 70Mpa / 105 Mpa, 400F | cased hole |
| CHAMP IV Packer | 7”-13 3/8” Casing | 70Mpa,400F | cased hole |
| Champ XHP Packer | 7”-13 3/8” Casing | 105Mpa, 400F | cased hole |
| RTTS Circulating Valve | 4 1/2”-20” Casing | 70Mpa, 400F | cased hole |
| IPO Circulating Valve | 5” OD | 105Mpa 400F | Open hole , cased hole |
| Hydraulic Circulating Valve | 3 7/8” and 5” OD | 105Mpa 400F | Slim hole , cased hole |
| RD Safety Circulating Valve | 3 7/8” and 5” OD | 105Mpa, 400F | Slim hole , cased hole |
| RD Circulating Valve | 3 7/8” and 5” OD | 105Mpa, 400F | Slim hole , cased hole |
| OMNI Circulating Valve | 3 7/8” and 5” OD | 105Mpa, 400F | Slim hole , cased hole |
| RTTS Safety Joint | 4 1/2”-20” Casing | 105Mpa, 400F | cased hole |
| Safty joint | 4 1/2"-20" | 105Mpa, 400 F | open hole |
| Round mandrel slip joint | 3 7/8” and 5” OD | 105Mpa, 400F | Slim hole , cased hole |
| Tubing string Tester valve | 3 7/8” and 5” OD | 105Mpa, 400F | Slim hole , cased hole |
| RD Sampler | 3 7/8” and 5” OD | 105Mpa, 400F | Slim hole , cased hole |
| Drain valve | 3 7/8” and 5” OD | 105Mpa, 400F | Slim hole , cased hole |
| LPR-N Valve | 3 7/8” and 5” OD | 105Mpa, 400F | Slim hole , cased hole |
| Select tester valve | 3 7/8” and 5” OD | 105Mpa, 400F | Slim hole , cased hole |
| Hydraulic Jar | 3 7/8” and 5” OD | 105Mpa, 400F | Slim hole , cased hole |
| Gauge Carrier | Design as per Gauges | 105Mpa, 400F | Slim hole , cased hole, open hole |
| Radial shock absorber | 7”Casing | 105Mpa, 400F | cased hole |
| Vertical Shock Absorber | 5” OD | 105Mpa, 400F | cased hole |
| Super Safety Valve / BOP safety valve | 8” OD | 105Mpa, 400F | cased hole |
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2014
Total Annual:
5Million-10Million
Employee Number:
>100
Ecer Certification：
Verified Supplier
ZZ Top Oil Tools Co.,Ltd as head office registered in Xi’an City in 2010, and in 2016, ZZ TOP OIL TOOLS enlarged the downhole oil tools factory under the Brand - TECHCORE in Baoji, which engages in designing and manufacturing the downhole oil tools including DST tools, Coil... ZZ Top Oil Tools Co.,Ltd as head office registered in Xi’an City in 2010, and in 2016, ZZ TOP OIL TOOLS enlarged the downhole oil tools factory under the Brand - TECHCORE in Baoji, which engages in designing and manufacturing the downhole oil tools including DST tools, Coil...
Get in touch with us
Leave a Message, we will call you back quickly!