Techcore Oil Tools Co.,Ltd,
| Supply Ability | 80 sets/month |
| Delivery Time | 35-40 days |
| Packaging Details | Polly wood, suitable for sea and air shipment |
| Usage | Downhole Drill Stem Testing Tools |
| Type | Flapper Type tubing string tester valve |
| Standard | NACE MR0175 |
| Working Temperature | Max. to 450 oF |
| Working Pressure | 15000psi |
| Working Condition | H2S service above 175oF |
| Material | Alloy Steel |
| Connection | CAS Box X Pin; IF Box X Pin |
| Brand Name | Techcore |
| Model Number | TST Valve |
| Certification | ISO, BV, SGS |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Multi Cycle Downhole Oil Tools OMNI Valve Downhole Well Testing Equipment
Slim Hole Sleeve Type Drain Valve Downhole Drilling Tools 3 7/8" 15000 PSI
Full Bore Retrievable Packer Downhole Oil Tools 9 5/8" 10000 PSI Well Testing
Downhole Retrievable Packer Drill Stem Test Mechanical Packer 3 1 / 2"
Product Specification
| Supply Ability | 80 sets/month | Delivery Time | 35-40 days |
| Packaging Details | Polly wood, suitable for sea and air shipment | Usage | Downhole Drill Stem Testing Tools |
| Type | Flapper Type tubing string tester valve | Standard | NACE MR0175 |
| Working Temperature | Max. to 450 oF | Working Pressure | 15000psi |
| Working Condition | H2S service above 175oF | Material | Alloy Steel |
| Connection | CAS Box X Pin; IF Box X Pin | Brand Name | Techcore |
| Model Number | TST Valve | Certification | ISO, BV, SGS |
| Place of Origin | CHINA | ||
| High Light | downhole drilling tools ，oil well tools | ||
Oil Well Downhole Testing Tubing String Tester Valve Flapper TST Valve
The TST valve is the tubing string tester valve as the part of the DST Toolstring during the well pressure-test the workstring while running in the hole. The tubing string tester is featured with full bore design and requires a differential pressure between the annulus and the tubing to shear. The tubing string tester valve is applied in cased hole drill stem testing operation and oil well flow operations. The tester valve is composed with flapper valve and spring, locking dogs and Shear pin section
How to operate the TST Valve
When the TST flapper valve opens, it allows the workstring to fill up. The shear pins hold the mandrel in place. The workstring can be pressure-tested as many times as required as it is run in the hole. While the workstring is stationary, a spring keeps the flapper valve closed. After the workstring pressure test is complete, the tool is sheared when annulus pressure is applied to the predetermined shear pin rating. (The shear rating can be adjusted in 500 psi increments to shear from 500 to 60000psi differential). When the pins shear, the mandrel moves up and pushes the flapper open, allowing the locking dogs to engage. The tool is then fully open. The tool works on differential pressure between annulus and tubing. Failure to shear initially on application of annulus pressure is not critical.
Specification of Tubing String Tester Valve
| No | Specification | 5” |
| 1 | O.D. | 127.5mm |
| 2 | Bore Diameter | 57mm |
| 3 | Length | 1333mm |
| 4 | Flapper valve diff. pressure | 70Mpa |
| 5 | Working pressure | 105Mpa |
| 6 | Shear pin valve | 3.5Mpa/pc |
| 7 | Service | H2S,NACE MR0175(>175oF) |
| 8 | Working temperature | -29oC+204oC |
| 9 | Connection thread | 3 7/8CAS. BXP or 3 1/2 IF.BXP |
﹡HSE﹡Safety instructions of the Tubing String Tester Valve
* When running each pressure test, you must increase pressure gradually. When the pressure is up to 20MPa, hold on for one minute, then every 10MPa keep it for one minute until the rating pressure;
* During doing the pressure test, the tool should be placed in the test pit and cover the protecting board on the pressure test plug.
* During the whole process, make sure the entire test operator keep away from plug and joint which may laps
* Test area should set isolation, others except operator not allowed to enter test area.
* If there is anybody in the test area, it should set isolation, avoiding test production fly off the test area.
Welcome to contact us for more information about the downhole tools and our service!
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2014
Total Annual:
5Million-10Million
Employee Number:
>100
Ecer Certification：
Verified Supplier
ZZ Top Oil Tools Co.,Ltd as head office registered in Xi’an City in 2010, and in 2016, ZZ TOP OIL TOOLS enlarged the downhole oil tools factory under the Brand - TECHCORE in Baoji, which engages in designing and manufacturing the downhole oil tools including DST tools, Coil... ZZ Top Oil Tools Co.,Ltd as head office registered in Xi’an City in 2010, and in 2016, ZZ TOP OIL TOOLS enlarged the downhole oil tools factory under the Brand - TECHCORE in Baoji, which engages in designing and manufacturing the downhole oil tools including DST tools, Coil...
Get in touch with us
Leave a Message, we will call you back quickly!