Product Specification

Hot Melt Sealant.Hot Melt Sealant for IGU Second Sealing,Hot Melt Insulating Glass Sealant

Hot Melt Sealant for Insulating Glass

□Passing the test carried out by the national glass testing central in Qinhuangdao

□Registered with the ISO9001 certificate of international quality system certification

□Standard number: Q/T XHLJ002-2002

□Authorized number: 01-168 number of Jingtong technical administration bureau

Excellent seal ability Time saving and cost reducing

One minute curing Good quality and green product

  The kind of hot-melt sealant is structured butene sealant, the company uses imported sealing collagen material , butyl rubber , resins and other dozens of additives , the use of advanced technology, specifically designed for the hollow glass industry , its glass and aluminum has superior adhesion.

This product can resist ultraviolet rays and a wide range of temperature changes and moisture intrusion caused by aging. And unlike other sealant, because the product has a strong structural bond strength , with good water tightness , therefore, unnecessary double sealed , single-channel sealing sealing and insulating glass can solve structural problems . This glue is a new generation of green ( non-toxic, tasteless ) quality products , which now accounts for 60% of the North American sealed insulating glass market .

One-component insulating glass hot melt adhesive characteristics:
1, the sealing effect is good, easy to guarantee quality ;
2, no curing period , save floor space ( one minute cure) ;
3 , an environmentally friendly product , the use of non- waste, clean environment ;
4 , saving you time , materials , staff, reduce production costs.

HOT MELT SEALANT is high quality green product of a new generation, and is produced especially for insulating glass. It is able to yield outstanding adhesion to glass and aluminum, as well as excellent resistance against water which enables single sealing to solve the structural and sealing problems of insulating glass.

Introduction:
Hot Melt Sealant,hot melt butyl insulating glass sealant is single component, solvent-free,
and as a new generation of being green and good quality.
Good adhesion with glass, aluminum, galvanized steel, stainless steel and other materials.
Because of its good water resistance and high strength, it does not require double sealing.
Features:
High strength, esay to operation.
Excellent non-sagging performance to reduce the operating procedures.
Less sticky after construction, easy to handle.
Good bonding with glass and metal.
Purposes:
Hot Melt Sealant mainly used for indoor insulating glass seal, shall not be used in structural applications.
This product is made with insulating glass to meet the requirements of in GB/T11944-2002.
Instruction manual:
Washing and drying the adhesive surface to remove dirt, oil and lipids.
Hot Melt Sealant uses coating machine for coating.
Specific conditions of use can be achieved by adjusting the temperature and pressure.
The extrusion temperature ranges is from 130 degree ~ 160 degree.
Storage:
24 months stored in cool, dry and ventilated place.
Package:
Carton: 6.5Kg / box.
Note: You can also be customized according to the needs of manufacturers.
Transportation:
Hot Melt Sealant is non-dangerous goods, can be transported by train, car, ship and airplane.
IMPORTANT:
Above the relevant parameters on the product, particularly with regard to the application for tips,
it is based on our tests and experience raised.
Due to the use of different materials and construction conditions,
we recommend that you use to complete before the necessary tests to ensure that our products can be better used.