Convenient Intermediate Frequency Massager / Electronic Pulse Stimulator Relax

Product Specification

Convenient Intermediate Frequency Massager Relax Muscle Flexible

Product description

In the modern society, due to the popularization of computers and smartphones, various diseases caused by muscle strain torment us continuously. The Intermediate frequency massager are made by our company using microelectronics technology to make the IF equipment miniaturized, intelligent and portable. There are 19 electronic prescriptions in total, of which three are factory-matched, making it easy to self-treat anytime, anywhere.

Main technical parameters

1. Use of environment: temperature 10 ℃ ~ 30 ℃, relative humidity ≤30% ~ 70%.

2. Dimensions: 136 × 70 × 17cm (length × width × height).

3. Weight of the machine: 150 g.

4. Structure: mainly consists of the host, the electrode sheet, the output cable and the connection cable.

5. Input power: ≤5W.

6. Battery type: Lithium-ion batteries.

7. Batteries capacity: 3.6V / 3500mAh (TYP).

8. The operating frequency: 1 kHz ~ 6 kHz, tolerance ± 10%.

9. The modulation frequency range: within the range of 0-150Hz.

10. Amplitude modulation: offers 0%, 33%, 60% and 100% of the four kinds of amplitude modulation, tolerance of ± 5%.

11. The fundamental frequency and waveform: square wave, frequency of 1 kHz ~ 6 kHz.

12. Frequency and waveform modulation wave: a squarewave, sharp wave, triangle wave, exponential wave, saw tooth, sine wave, continuous wave, trapezoidal wave, wave the fan, fan ladder wave and combinations thereof.

13. The output electric current: in 500Ω load resistor, the output current does not exceed the following limits: frequency ≤1500Hz, to 80mA (rms), frequency> 1500Hz to 100mA(rms).

14. The output current stability: load resistance of 500Ω, the output current change rate should not exceed 10%.

15. The output current regulation mode: with keys increment, decrement (50 files, each file 1mA).

16. Continuous working time: every 1000mAh, many massage time 40min.

17. Charging function: with internal rechargeable battery,and a charging port, charging voltage 5V, tolerance of ± 5%.

The charging current is less than 1.5A when the machine is in the charged state and can not be used for massage.

18. The discharge function: mobile power function model for mobile phones and other devices can supply output voltage 4.75 ~ 5.25V, the output current is not less than 1A, the output voltage tolerance of ± 5%; if the machine is in power in the state, it can not be used for massage .

Cleaning and maintenance
1. The surface of the machine needs wiping by wet cloth (do not use chemical reagent) to keep clean.
2. Please shut down the power when not in use.
3. Keep the machine in an environment not dusty or exposed to direct sunlight or it could get the electrodes unavailable.
4. Please use the methods below to use and maintain the batteries:

The indications of using and maintaining batteries
① Avoid long time charging;
② Avoid using in an environment with high or low temperature;
③ Please shut down the power after charging finished.
④ When the mobile power charger is free at work, charge it to 50% electric quantity. Do a complete charge-and-discharge every 3 months, after which recharge it to 50% electric quantity.
⑤ The batteries are non-detachable batteries in this product. Please do not detach them personally or use sharp device to spear into the batteries or the damage may be caused.