360° Automatic Electric Medical Exam Chair / ENT Medical Procedure Chair

Product Specification

360° Automatic Electric Medical Exam Chair / ENT Medical Procedure Chair with Doctor Chair Free

Description:

ENT chair for hospitals, medical units of the facial features and treatment of patients with the use of patient investigation.

The chair uses steel, MDF, cast aluminum parts, cast iron welding or screws combined structure formed.

Operation of the surface of chrome-plated parts, other parts of the surface paint.

Backrest, cushion, armrest and leg plates forming processed using MDF for the end of care, the outside surface with the leather package, the internal filling bubbles.

Backrest can be tilted forward, backward, seats can be up and down movements, all use of electric fader control.

The first frame part can be controlled through the handle up and down, before and after any adjustment of the angle and height. Seats can be freely rotated manually, using pedal body to control its lock.

Product Performance indicators:

Basic dimensions: length 800mm × width 645mm × height 1150mm-1330mm error of ± 5 mm load 135kg, electric lift, seat lift range of not less than 180mm, adjustable backrest tilt angle range around the forward 10 ° backward 85 °, and to ensure that solid support.

Adjustable arm 360 °, the angle at the lifting and regulation within the scope of any height and angle adjustment.

Electric lift smoothly, without catching and visible shaking phenomenon. Noise less than 60dB (A), there should be positioned after the cessation of the phenomenon of free fall.

Respectively, to the left or right seat can be rotated 85 °, since power is not greater than 50N, braking force is not less than 100N, fixed position without loosening after the lock.

The first frame adjustable flexible head can be up and down, front and rear angle can be arbitrarily adjusted, location does not loose after locking.

135kg in weight lying in the normal sitting position and put back when used without permanent deformation of various parts of open-welding or screws loosening.

After the clean appearance complete product assembly, welding at a solid, flat, non-Sealing-off, slag, cracks and deposits.
Paint part of the uniform, smooth, color consistent. Electroplating section does not leak yellow, off-plated, gloss consistent.

Headrest, backrest, cushion, armrest, and leg panels leather package surface should be soft, smooth, non-open-line processing of parts.

Product Features:

The product of power supply voltage: AC 220-240V, Frequency: 50-60Hz Fuse Type: 250V/1A
Security Type: Class I Type B. Input Power: 70VA.

Usage:

ENT chair electric lift, it will be connected to AC 220-240V, Frequency 50-60Hz power supply, according to the control unit back on the lift button or foot switch on the lift operation of lift buttons or switches can be identified.

Seats need to rotate when the direction or position lock can be installed on the base of the pedal disc locking device can be opened or locked.

Need to adjust the angle of the first frame position, the first head frame lift handle, after the first frame and then adjust the angle or height, positioning, will handle press can be

When the lock failure can be covered at the bottom of the first frame female screw, will lock the mother inside EYE clockwise precession, after appropriate adjustment, and then covered the mother can tighten the locking precession.

Such as the need to replace the fuse, first unplug the power plug, you can use the screwdriver to replace.

Maintenance:

The aircraft need to use a soft nature of everyday items, wipe the outer surface to keep them clean.

Electric putter and external plug the power cord should be regularly checked.

Replacement insurance, please cut off power supply when the device before the device can use the screwdriver to replace insurance.

Disinfection Method:

Patients in contact with the ENT chair parts, should be on a regular basis the implementation of alcohol or other disinfectant wipe disinfection.

Note:

1, ENT chair seat rotation, the first frame to adjust the angle, they all must first adjust the device lock to open and then adjust the body is strictly prohibited mandatory moving to avoid the locking body malfunction.
2, the need to connect with the operation control table, pay attention to first check whether the line matches the aircraft wiring methods, whether uniform or universal, to prohibit access to avoid mistakes in the wrong lead to an overall line damage.

Transport and storage environment:

Transport: outer packaging on the storage and transportation should mark icon or logo, or ordering the contract in accordance with regulations.
Storage: ENT chair should be placed on the relative humidity ≤ 93%, ambient temperature range -40 ℃ ~ 55 ℃, well-ventilated, non-corrosive gases, indoor storage.