D2 - 1 Intelligent Arduino Car Robot , Yellow / Bule Arduino Robot Car Kit

Product Specification

D2-1 Intelligent Tracking Robot DIY smart car kit diy electronic car suit

Description:

Icstation smart tracking robot car is widely used in school robotics and electronics education competitions, you can have a lot of fun and learning putting this kit together and understanding the theory behind the way the Light Dependent Resistors detect the difference between the black of the line and the white of the area outside the line, if you're helping a youngster put this kit together you can instruct them in reading the resistor codes or using a multimeter to identify the ratings of the resistors so placement on the PCB is correct.

(1) Install circuit:
① Install metal film resistor, DIP-8P IC socket, Self-Locking switch, Potentiometer, S8550, Capacitor, Red LED on PCB according to mark on PCB.
② Install Mecanum wheel, the support bolts of the caster are inserted into the hole, tighten the nuts screwed into the caster, and finally fit the caster and tighten.
③ Install photoresistance resistance and white LED on PCB reverse.
④ Install battery case.
⑤ Testing: Use 2pcs AA batteries; Press on switch. If 2pcs white LED ON, the installation is successful. If LED off, please check the welding.

(2) Install mechanical parts:
① Install the four gaskets on the circuit board.
② Insert a steel shaft from the center hole of the wheel, and note that the direction is inserted from one side of the raised sleeve of the wheel. It is better to insert the steel shaft parallel to the smooth side of the wheel.
③ Put a three-way sleeve into the steel shaft, close to the wheel, and then a gasket into the steel shaft, close to the three-way sleeve, installed in place, toggle three-way sleeve, should be flexible.
④ Place a gear into the steel shaft in the center of the steel shaft.
⑤ Put a three-axis sleeve into the end of the steel shaft so that the car side of the wheel assembly to complete.
⑥ Install motor.
⑦ Testing: Power on. Check S8550 or 10ohm resistor if motor don’t move; Install LM393.

Feature:

1 pcsx In D2-1 line patrol car parts production of Electronic Science and technology DIY telligent tracking car kit (Due to the shipping way is not allow,so we not included the battery, thanks for your well understanding! )

Package included:

Different package at optional:
1. Retailing Package:Anti-static bag
2. Bulking Packing:Plastic Bag Package
3. Retailing Box package design according to your requirement( Order > 3000PCS)

Different anti-static package at optional:
1. Full or partial package according as your requirement.
2. Retailing Box package design according to your requirement ( Order > 2000PCS )

Competitive Advantage:

1. Convenient & Friendly Customer Service
2. Low Prices Direct From Factory Suppliers
3. Fast Delivery Around the World.
4. High Quality With Global Standards.
5. 1 Year Factory Warranty
6. Safe Shipping Way and Payment

FAQ:

1. What is the delivery time?
Normally, 1-5 workdays after payment; Special requirement orders, delivery time is negotiable.

2.If the products can’t work after receiving it,what should I do?
We will replace new items for you at once and then we make the judgement for the issue.

3.If the products don’t meet my demand after I received it,can I return it?
Yes,no problem.You can return back to us, we will refund your full payment.

4.what is the warranty?
1-3 months to replace new items for free, 1-2 years repairing free according to different products.

5.Do you accept OEM design?
Yes,we do.We can design according to your requirement.

6.Are you a manufacturer?
Yes,we are.