Lithium Industry Used Discharge Peeler Centrifuge Automatic Operate

Product Specification

Lithium Industry Used Automatic Operate And Discharge Peeler Centrifuge

Product Description

GK1250-NB Peeler Centrifuge is a automatic batch operation machine which is horizontal type and has wide scraper for discharging. Users can do cyclic operation on this machine automatically or by manual, each cycle is including feeding, separating, material washing, discharging and screen washing. Each process is done under full speed.

This machine adopts an electric hydraulic joint control system, with independent electrical control system and hydraulic system. During automatic operation, the operating time of each process of the machine is controlled by the electrical control system and can be adjusted within a certain time range.

Due to the high separation factor of the machine, the separation effect is good, and it can also effectively wash the solid phase. The solid phase humidity obtained through separation is low. Under the conditions of reasonable selection and use of filter media, the machine has high production capacity. However, due to the high-speed scraper discharge, it has a certain degree of fragmentation of solid particles.

Adjusting items of machine

1. Adjustment of working pressure of oil pump

Adjust the overflow valve to make the oil supply system pressure 3.0-4.0mpa. Adjust the pressure to ensure the operation of each oil cylinder under load. Take the scraper cylinder as example, scraper easy action in the low working pressure, the rest of the cylinder can work normally, needn’t higher the oil pressure. Increased drag after blade wear is not included.

2.Stop position adjustment of scraper

When the scraper is working, the rocker arm on the scraper device touches the limit bolt, and the distance between the scraper and the press cloth (or filter) in the drum is 5~ 10mm. By adjusting the limit bolt of the door cover and adjusting the position of the proximity switch or switch seat, the axial clearance between the scraper blade and the bottom of the rotary drum and the bar shall not be less than 5mm

3. Drum loading amount, filter cake thickness according to different materials, generally not more than 80mm, weight of dry material less than 100kg

4. Adjust the working procedure time during operation

It is mainly determined according to the specific material, which cannot be fixed and can meet the requirements of the material in the centrifuge section. If the machine and equipment allow, the production cycle can be shortened and the output can be increased. The time range of the general working procedure is 0~30 seconds. Feeding process is 3-60 seconds: filtering process is 0-300 seconds; The secondary feeding process is 0~60 seconds; The drying process is 0~300 seconds; Scraping process is 18~30 seconds.

Successfully Application

General requirements for the application range of horizontal scraper discharge centrifuges: separation of solid-liquid two-phase systems with particle size ranging from 10 to 500um, solid phase concentration ranging from 20 to 80% (weight concentration), and liquid phase viscosity less than 10-2Pa. s. In addition, it can also meet the requirements of washing the solid phase. This machine is now widely used in industries such as chemical, light industry, food, pharmaceutical, etc. The separated materials include ammonium sulfate, sodium sulfate, sodium chloride, boric acid, starch, pesticides, synthetic resins, potassium chloride, light sodium carbonate, polyvinyl alcohol, polyoxymethylene, polyethylene, sodium sulfate, caustic soda, salt, fertilizer, aluminum sail, synthetic rubber, and so on.

Technical Paramaters

Our service

1 . Technicians are available for overseas service.

2 . 12 months guarantee period from machine arriving date.

3 . The customer could get trained by our experienced technician

4 . We always keep certain inventory level of spare parts, which means the replacement can be sent to you timely