Dry High Clean Industrial Ultrasonic Cleaner , 25khz Ultrasonic Mould Ultrasonic

Product Specification

Dry High Clean Industrial Ultrasonic Cleaner , 25khz Ultrasonic Mould Ultrasonic Cleaning

Dry High Clean Industrial Ultrasonic Cleaner , 25khz Ultrasonic Mould Ultrasonic Cleaning

The electrolysis ultrasonic mould cleaning machine and the alkaline mold electrolysis cleaning liquid can quickly and effectively remove the remnants of the gas and oxidation layer inside the mold surface and the mold hole, and restore the finish of the mould.
The working principle: the electrolysis cleaning system launches the gas to the metal surface, loosening the dirt with the electrolyte, floating up through the vibration of the ultrasonic, and floating up the dirt, the metal is attached to the cathode, and the effect of the cleaning of the sauna is removed from the gas and gas residue, the P0M residue, the residue of color powder, the high temperature sulfide, oil, and carbon deposition. Rust, rust and other mold contaminants, even if the dirt inside the corner can also be absorbed by the electrolytic cathode.
Advantages of electrolytic ultrasonic cleaning machine: 1, restore metal to the original bright color. 2 even complex shapes can remove dirt. 3 can achieve the purpose of clean decontamination. 4 good rust removal and rust prevention effect. 5 generally speaking, it will take about an hour or so longer than manual cleaning. 6 can greatly reduce the adverse rate after washing.

The characteristics of the electrolytic ultrasonic cleaning machine 1. The electrolytic ultrasonic cleaning machine is made up of 316&304 stainless steel tank body, ultrasonic system, electrolytic circuit system, electrode, tray, filter circulation system, timing device, panel appliance switch device. 2, ultrasonic cleaning is the process of using the high frequency power of 40KHZ to convert the transducer from electric energy to the mechanical energy. During this process, the transducer transfers huge energy to the cleaning tank solution, produces positive and negative pressure zones in the liquid, and forms thousands of hole bubbles. In the continuous formation of the explosion, the impact is cleaned on the surface of the metal, and the dirt on the metal surface is quickly separated. 3, the circulating system is a corrosion resistant magnetic pump, and the filter consists of a self circulation filter. The cleaning and falling dirt is quickly separated from the cotton core to reduce the floatation on the liquid surface, and at the same time, the electrolysis of the solution can be accelerated. The electrolysis ultrasonic system is composed of ultrasonic generation system, electrolysis circuit system, circulating filtration system, special gold cleaning liquid and water-based antirust agent.

Operation method: it only needs to pour the electrolysis cleaning liquid into the machine cleaning slot, put the mould in need into the frame, put the electrode well, adjust the voltage and current and operation time, and open the power supply. After washing, remove the mold and rinse it on the tap water pipe, then immerse it in rust inhibitor. It is possible to blow dry with compressed air. At present, rust proof agent for three months, half a year, and even two years can provide an electrolytic ultrasonic mould cleaning machine, which can effectively remove the carbon, the black spots and fouling, such as the oxidation layer, plastic rubber, rust spot, and so on, under the combination of the special mold cleaning liquid. It has the ability to restore the original color. Electrolytic ultrasonic cleaning is the most effective way to maintain precise plastic moulds. The electrolytic mold washing machine produced by our company is reliable in quality and reasonable in price. Welcome to negotiate with us!

Dry High Clean Industrial Ultrasonic Cleaner , 25khz Ultrasonic Mould Ultrasonic Cleaning