Ours ultrasonic Co.,Ltd
| Payment Terms | T/T, Western Union |
| Supply Ability | 1000 |
| Delivery Time | 5days |
| Packaging Details | Paper packaging |
| Warranty | 1 year |
| Supply voltage | AC100V~AC250V,50~60Hz |
| Measuring Range | 1khz-5mhz |
| Resolution | 0.15degree |
| Measurement index | all parameters and figures; |
| Applications | ultrasonic transducer |
| country | china |
| Digital display | yes |
| Brand Name | ours |
| Model Number | ARS-ZKFXY5000 |
| Certification | ce |
| Place of Origin | shenzhen |
View Detail Information
Explore similar products
CE 1khz-1mhz Piezoelectric Element Ultrasonic Analysis For Piezo Ceramic
Precise Measuring Ultrasonic Analysis Piezo Ceramic Element For Transducer
Ultrasonic Piezoe Transducer 50mm Piezoelectronic Ceramic Disk 66.7KHz
1MHz Transducer Piezo Ceramic Disc Barium Titanate For Flow Sensor Pzt-4 Pzt-8
Product Specification
| Payment Terms | T/T, Western Union | Supply Ability | 1000 |
| Delivery Time | 5days | Packaging Details | Paper packaging |
| Warranty | 1 year | Supply voltage | AC100V~AC250V,50~60Hz |
| Measuring Range | 1khz-5mhz | Resolution | 0.15degree |
| Measurement index | all parameters and figures; | Applications | ultrasonic transducer |
| country | china | Digital display | yes |
| Brand Name | ours | Model Number | ARS-ZKFXY5000 |
| Certification | ce | Place of Origin | shenzhen |
| High Light | 1khz Ultrasonic Transducer ，5mhz Ultrasonic Transducer ，30W Horn Analyzer | ||
Ultrasonic Transducer And Horn Analyzer Or Testing And Tuning Power
The two clamps of the tester are respectively clamped on the positive and negative electrodes of the transducer. Note that the transducer should not be electrified and live detection is not allowed. The positive and negative electrodes need to be short circuited. After discharging, clamp the clamp, and then turn on the power supply, open the software of the mobile phone, set the starting frequency and the final frequency, such as 28K transducer or mold, set the starting frequency 27, the ending frequency 29, and then click At first, the curves and parameters come out automatically. All the data can be out in about 30 seconds. Click the linear arrow on the top to understand the linear, logarithmic, GB, GB circle. GB circle is the admittance circle. All the parameters are clear at a glance. If you want to test the frequency of the welding head, you need to screw the welding head to the transducer. At this time, the comprehensive frequency impedance of the welding head and the mold is measured. Attention is needed.
This portable impedance analyzer is mainly used to measure the performance of ultrasonic transducer, ultrasonic horn, piezoelectric ceramics, capacitance and inductance. It is one of the most convenient tools for impedance scanning and characteristic analysis of ultrasonic equipment. No matter where you go, you can quickly and conveniently test the parameter characteristics of the device, and you can share it remotely.
Ultrasonic Transducer And Horn Analyzer Or Testing And Tuning Power
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2017
Total Annual:
300000-500000
Employee Number:
100~180
Ecer Certification：
Active Member
Ours Ultrasonic Co.,Ltd Ours Ultrasonic Co.,Ltd was established in 2009 .Registered capital of 3 million.Our Plant located at Shenzhen ,China More than 2,000 square meters . The company employs 100-150 people, including 10 technicians and 15 international and domestic sellers. Ultra... Ours Ultrasonic Co.,Ltd Ours Ultrasonic Co.,Ltd was established in 2009 .Registered capital of 3 million.Our Plant located at Shenzhen ,China More than 2,000 square meters . The company employs 100-150 people, including 10 technicians and 15 international and domestic sellers. Ultra...
Get in touch with us
Leave a Message, we will call you back quickly!