Mengchuan Instrument Co,Ltd.
| Payment Terms | D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 500 |
| Delivery Time | 5-8 work days |
| Packaging Details | Carton |
| Service | Air and non-conductive, non-corrosive gases |
| Temperature Limits | -20 to 160°F (-29 to 71°C), 10 to 95% RH |
| Pressure Limits | 10 psig (0.69 bar) |
| Power Requirements | 12 to 36 VDC |
| Output Signal | 4 to 20 mA DC, 2-wire |
| Response Time | 250 ms max |
| Electrical Connections | Screw terminals |
| Housing | 300 Series stainless steel (NEMA 2) |
| Weight | 1.04 lb (472 g) |
| Condition | Original and new |
| Brand Name | Dwyer |
| Model Number | Series 607 |
| Certification | CE |
| Place of Origin | USA |
View Detail Information
Explore similar products
1/2" Female NPT Precision Pressure Transmitter NEMA 4X Housing
NPTF Differential Pressure Controller H100k-540 Differential Pressure Switches
WTF12-3P2431 Precision Pressure Transmitter IP67 Photoelectric Proximity Sensor
SICK Gtb6-n1211 Precision Pressure Transmitter Photoelectric switch 10 VDC
Product Specification
| Payment Terms | D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 500 |
| Delivery Time | 5-8 work days | Packaging Details | Carton |
| Service | Air and non-conductive, non-corrosive gases | Temperature Limits | -20 to 160°F (-29 to 71°C), 10 to 95% RH |
| Pressure Limits | 10 psig (0.69 bar) | Power Requirements | 12 to 36 VDC |
| Output Signal | 4 to 20 mA DC, 2-wire | Response Time | 250 ms max |
| Electrical Connections | Screw terminals | Housing | 300 Series stainless steel (NEMA 2) |
| Weight | 1.04 lb (472 g) | Condition | Original and new |
| Brand Name | Dwyer | Model Number | Series 607 |
| Certification | CE | Place of Origin | USA |
| High Light | 607 Differential Pressure Transmitter ，Stainless Steel Differential Pressure Transmitter ，Precision Pressure Transmitter 608 | ||
Description The Dwyer Series 607 Differential Pressure Transmitter converts positive, negative (vacuum) or differential pressures of clean, dry air or other non-conductive, non-corrosive gases into a standard two wire, 4-20 mA output signal. Several factory calibrated models are available with ranges from 0-.10″ W.C. to 0-25″ W.C. All models employ a variable capacitance transducer with a micro-machined, ultra thin silicon diaphragm enabling precision measurement and control of very low pressures. Because no epoxies or other organics are used to seal the sensor, performance is exceptionally stable and drift free. It is also highly resistant to overpressure, shock and vibration. See specifications for complete details.
| Model | Description |
|---|---|
| 607-0 | Differential pressure transmitter, range 0-.10" w.c. |
| 607-0B | Differential pressure transmitter, range .10-0-.10" w.c. |
| 607-1 | Differential pressure transmitter, range 0-.25" w.c. |
| 607-1B | Differential pressure transmitter, range .25-0-.25" w.c. |
| 607-2 | Differential pressure transmitter, range 0-.50" w.c. |
| 607-2B | Differential pressure transmitter, range .50-0-.50" w.c. |
| 607-3 | Differential pressure transmitter, range 0-1.0" w.c. |
| 607-3B | Differential pressure transmitter, range 1.0-0-1.0" w.c. |
| 607-4 | Differential pressure transmitter, range 0-2.0" w.c. |
| 607-4B | Differential pressure transmitter, range 2.0-0-2.0" w.c. |
| 607-7 | Differential pressure transmitter, range 0-5.0" w.c. |
| 607-7B | Differential pressure transmitter, range 5.0-0-5.0" w.c. |
| 607-8 | Differential pressure transmitter, range 0-10" w.c. |
| 607-9 | Differential pressure transmitter, range 0-25" w.c. |
1. Location: Select a clean, dry location free of excess vibration where the temperature of the unit with be between -20 and 160°F. Distance from the receiver is limited only by total loop resistance. See “ Electrical Connections”. The tubing supplying pressure to the transmitter can be run practically any distance. Long tubing lengths will not affect accuracy but response time will be increased slightly.
2. Position: The Series 607 Transmitter is not position sensitive. However, it is recommended that you avoid mounting with pressure connections pointing up because of the chance of condensed moisture entering the interior. Moisture can also be avoided by routing tubing with a low point just ahead of the transmitter.
3. Mounting: Attach to mounting surface with two #8 or #10 screws in the mounting slots provided.
4. Pressure connections: The Series 607 Transmitter is shipped with a short length of tubing installed between the ports to keep the interior clean. Remove it and discard after unit is mounted. Connect positive (above atmospheric) pressure to port marked “HIGH and vent the “LOW” port. Connect negative (vacuum) pressure to port marked “LOW” and vent the “HIGH” port. For differential pressures, connect the higher one to the “HIGH” port and the lower one to the “LOW” port.
Caution: Do not exceed the specified supply voltage rating. Permanent damage, not covered by warranty, may result. This unit is not designed for AC voltage operation.
Electrical connections to the Series 607 Transmitter are made to the two screws on the terminal strip labeled + and -. If polarity is inadvertently reversed, the loop will not function properly but no damage will be done to the transmitter because of internal circuit protection. An external power supply delivering 12 to 36 VDC must be used to power the control loop in which the transmitter is connected. Refer to Figure B for connection of the power supply, transmitter and receiver. The power required to generate the 4-20 mA output signal depends on the loop resistance of the circuit and is proportional to the resistance according to the graph and formula in Figure C. The maximum length that can be used in the current loop is a function of wire size and receiver resistance. A shielded two conductor cable is recommended for control loop wiring. Make sure the total loop resistance is within the operating region as shown in Figure C.
| item | value |
| Customized support | OEM, ODM |
| Place of Origin | USA |
| Brand Name | Dwyer |
| Model Number | 607- |
| Service | Air and non-conductive, non-corrosive gases |
| Temperature Limits | -20 to 160°F (-29 to 71°C), 10 to 95% RH |
| Pressure Limits | 10 psig (0.69 bar) |
| Power Requirements | 12 to 36 VDC |
| Output Signal | 4 to 20 mA DC, 2-wire |
| Response Time | 250 ms max |
| Electrical Connections | Screw terminals |
| Housing | 300 Series stainless steel (NEMA 2) |
| Weight | 1.04 lb (472 g) |
| Agency Approvals | CE |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2013
Total Annual:
1000000-5000000
Employee Number:
30~60
Ecer Certification：
Verified Supplier
Mengchuan Instrument Co., Ltd. is located in Liushi Town, Yueqing City, Wenzhou, Zhejiang Province, surrounded by the beautiful world natural and cultural heritage - Yandang Mountain! It is mainly engaged in 2000 differential pressure gauge, red oil differential pressure gauge, pressure differential... Mengchuan Instrument Co., Ltd. is located in Liushi Town, Yueqing City, Wenzhou, Zhejiang Province, surrounded by the beautiful world natural and cultural heritage - Yandang Mountain! It is mainly engaged in 2000 differential pressure gauge, red oil differential pressure gauge, pressure differential...
Get in touch with us
Leave a Message, we will call you back quickly!