DOOSAN D1146 DE08 Engine Piston Pin 65.02502-0010 Wear Resistant

Product Specification

High Precision High Durability Engine Piston Pin For DOOSAN D1146 DE08 65.02502-0010

OPERATING PRINCIPLE:

The function of the piston pin is to connect the piston to the small head of the connecting rod, and transfer the gas pressure of the piston to the connecting rod, which in turn transfers it to the crankshaft.

A piston pin is a cylindrical pin attached to the skirt of the piston. Its middle through the connecting rod small head hole, used to connect the piston and the connecting rod, its role is to pass the gas force of the piston to the connecting rod, or make the connecting rod small head drive the piston together. To reduce weight, piston pins are generally made of high quality alloy steel and hollow.

EMERGENCY RESPONSE METHODS

During the driving of the excavator, if the transmission "jumps", the machine should be stopped (or continue to drive) in time, and then find the cause and eliminate the fault. The specific method is:
(1) If there is a "jump" when driving on a flat road, you can stop the machine according to the normal shutdown methods, carefully find the cause, and eliminate the fault.
(2) If there is a "jump gear" when driving uphill, you can set the gear to the low-speed position or the first gear position, and wait for the machine to stop when it reaches the top of the slope to troubleshoot; When "jumping the gear", you should stop the machine according to the action essentials and requirements of the ramp stop, and then troubleshoot.
(3) If there is a "jump" when driving on a downhill, you should move the gear to a high-speed position according to the action essentials of upshifting or take measures of "snatch" (emergency downshift), and wait for the machine to drive to the bottom of the slope. Stop the machine again to check and troubleshoot; if the "upshift" and "gear shift" are unsuccessful or "jump gear" occurs again (neutral gear at this time), the driver can control the engine speed at medium speed (to prevent the engine from stalling) , use the "point brake" method to make the machine slide to the bottom of the slope, and then troubleshoot. If the "upshift", the "grab" is unsuccessful, or the "jump" occurs again (this time it is neutral), and the machine is on the downhill slope again (at this time, the machine will go to the bottom of the slope at a very fast speed" "Dive"), you should quickly stop according to the action essentials and requirements of downhill stop, and then deduct the fault.

One: Whether the pilot _ secondary pressure of the rotary operation is within the normal range (the normal pilot pressure is above 35KG);
Two: The rotary relief valve is damaged, whether the rotary relief pressure is within the normal range (overflow pressure: 280KG);
Three: Whether the rotary main spool is switched in place, and whether the return spring of the rotary spool is broken;
Four: The distribution valve is worn and damaged, resulting in internal leakage of the rotary motor;
Five: The pump body and plunger of the rotary motor are worn and damaged, causing the motor to leak;
Six: Only if the rotation action is slow and other actions are normal, the failure of the hydraulic main pump and the main relief valve can be ruled out.

COMPANY INTRODUCTION:

FACTORY STRENGTH:

EXHIBITION
 

PACKAGE&SHIPMENT

FAQ:

1. Are you manufacturer or trading company?

We are the OEM manufacturer, head Office is in HongKong China.

2. What products do you make?

We are engaged in manufacturing engine cylinder liner, piston, piston ring, cylinder liner kits, cylinder head gasket, engine gasket kits and Other core engine parts.

3. What scenario can your product be applied?

Our products are widely used in power fields such as construction machinery, generator set, commercial vehicle, passenger car. agricultural machinery, ship, etc.

4. Which countries and regions are your market extend all over?

Our markets includes North America, Western Europe and the Middle East, Southeast Asia, Africa South America and all over the world,for example:USA,Germany and Australia,UAE and Brazil and so on..

5. What is the standard of package?

We have Japanese TP Brand package, also have wooden case/carton/standard shipping package,Or custom-made packaging.

6. What is the delivery time?

Generally, we will arrange the goods within 24 hours after your payment; If some items are no stock, it will take 30-45 days to produce after received deposit.

7. What kind of payment terms do you have?

L/C, D/A, D/P, T/T, X-Transfer is also acceptable.

8.How can I get a quotation?

A complete quotation based on the details as follows in your inquiry:

a.Excavator brand name;

b.Excavator model number;

c. Engine model;

d.Part number;

e. Pictures;

f.Quantity;

g.Other requirements, such as Packing, Shipping and so on.

9.How do you pack the goods?

The products will be carefully handled by three steps:

a: Wrapped with packing paper or plastic bag;

b: Japanese TP brand box or customized box;

c: Put in an appropriate carton box or wooden boxes and be fixed firmly.

10.How can I know the status of my order?

We will keep you udpate the process of the preparation, to ensure all issues are resolved prior to the delivery.products pictures can be provided if required. We shall send out the goods immediately after confirmation and you will get the tracking information right away

11.How to guarantee your service?

· Strict inspection during production

· Strictly check the products before shipment to ensure our packaging in good condition

· Track and receive feedback from customer regularly

12.What will you do about quality complaint?

·We will respond to customer within 24 hours.

·Our QC will retest the same item in the warehouse, if confirmed it is quality problem, we will make corresponding compensation.

13.What is the warranty time of the products?

The warranty time is 18 months based on the item details; We don't provide warranty time for original and used products.