Red Fine 53-63 Dental Diamond Burs Stainless Steel Straight Diamond Bur

Diamond Burs For Drilling Teeth Treatment Red (F) Fine / 53-63μ

Detailed Product Description:

Specifications:

Diamond Burs Used In Dentistry

Description:
1. Diamond bur has a stainless steel working part which is coated with fine diamond crystal.
2. It is defined as the rotary grinding instruments for hard tissues such as tooth and bones.
3. It is used connecting with dental handpiece .
4. It can also be used for grinding metal, plastic, porcelain and other hard materials.
5. No diamond spalling must be found by a loupe after bending electroplated part at 90 degree .
6. According to its intended use , choose the most appropriate diamond burs and use it for grinding hard tissues etc..


Specifications and models:

Flat head conical , apex type flame , taper head , pointed cone , cone round nose cone type , flat type , column type , round ball , ball spire tight mouth , single inverted cone, rugby, pear type, round type.

Classification coding system reflects shapes of burs.
TF / Taper Flat End　 TR / Taper Round End　 TC / Taper Conical End　
FO / Flame Ogival End　 SF / Straight Flat End　 SO / Straight Ogival End 　
SR / Straight Round End　 RS / Rounded Shoulder　 EX / Special (Extra) Shape　
BR / Ball Round Type　 BC / Ball Collar Type　 DI / Double Inverted Cone 　
SI / Single Inverted Cone　 WR / Wheel Round Edge　 CR / CR Inlay Preparation Dia-Burs　
CD / Children's Dentistry Dia-Burs S / Short Shank　 SS / Super Short Shank　
C / Coarse　 F / Fine　 EF / Extra Fine

Main performance and technical indicators:
1. Shank hardness not less than 250hv0.5 .
2. The surface roughness R of the shank of the car should be no greater than 0.4mum.
3. Corrosion resistance and corrosion resistance test shall not produce corrosion and deformation of the function, but it is allowed to have a slight electrical corrosion in the head and neck .
4. The radial circle of the needle should be no greater than 0.08 mm.

Diamond Burs For Crown Preparation

Use of instructions and precautions:
1. Sterilization should be sterilized with high temperature steam before using the needle .
2. Be careful to place the pin on the head of the mobile phone according to the operation instructions of the mobile phone .
3. When the operation is used , when the needle is rotated , it will be pressed to the part where it is to be drilled or polished .
4. The pressure of the needle is 50 ~ 100g is appropriate , the pressure should not be too large , and requires the force to be uniform .
 

Storage and duration:
After packing, the needle should be stored in a room with relative humidity less than 80% , no corrosive gas and good ventilation . Under the condition that the needle is packed and abide by the storage rules , it shall be guaranteed not to rust in a year and a half .
 

Figures:

The work head shall be specified in the parts according to the following figures .
D1: the diameter of the working part , the maximum diameter of the head or part of the working part .
D2: diameter of the neck , indicating the diameter of the shank of the emery .
L1 : working length , refers to the coating emery working length of the part .
L2 : refers to the entire bur the length of the needle.
 

Applications:

Competitive Advantage:
1. Diamong bur has a stainless steel working part which is coated with fine diamond crystal .
2. It is defined as the rotary grinding instruments for hard tissues such as tooth and bones .
3. It is used connecting with dental handpiece .
4. It can also be used for grinding metal, plastic , porcelain and other hard materials.

Diamond Burs Color Coding