LK-A14TD 440mm 220V 50Hz Implant Dental Chair Equipment

Product Specification

Implant LED Sensor Lamp LK-A14TD Dental Chair Equipment Touch Screen 9 Memory

STANDARD ACCESSORIES:

8 colors optional
Luxurious Implant LED sensor lamp

Spirit lock tight Equilibrium Equip
Compensate Dental Unit

X-film viewer

Multi-function switch feet steps
King Size Cushion
9 Memory Position

Strong and weak operation light

Four-way high speed air turbine H.P. 2sets

Powerful suction apparatus 1set each

Four-way low speed air motor H.P. 1set

Water suction and saliva ejector 1set

Unify move glass spittoon

Three way springe 2sets

Arm Rest 2pcs

Dental stool 1set

Lay in water of insides pot

Touch Screen Display Instrument tray with air brake

Supply Voltage: 220V 50Hz

Air Pressure: Larger than0.55Mpa

Water Pressure: 0.2Mpa-.04Mpa

Lowest position of chair: 440mm

Tallest position of chair: 860mm

Chair-back highest 5°

Chair-hack lowest 85°

Features:

OPTIONS ACCESORIES"

Curing light 1set

Ultrasonic Scaler 1set

Intra-oral Camera 1set

Electric Micromotor 1set

Fiber Optic System 2tubes

PACKAGE

Woodencase

Pacakge Information:

Wooden Case

250kg

147*110*122cm

40hq container 32pcs

Maintenance:

It’s necessary to maintain the chair regularly, in order to keep the chair wear well and beauty always.

(1) The chair will be ageing by touching with oil and the other corrosive, it should be avoided. The pillow can be taken down to disinfected with medical alcohol also.

(2) The surface can be cleaned and disinfected with medical alcohol to keep it beauty, at the same time, not to touch it by sharp or something hard.

(3) When you didn’t use the chair, please down the chair to the lowest position and up about 5cm. Stay the chair in dry environment that you can use it for a long time.

Clean and disinfection:

• H.P. disinfection

Please refer to the instruction for the disinfection of H.P.

2. Disinfection of the suction pipeline

Sterilize the suction pipeline in the high-pressure, high-temperature, vacuum, and disinfection box, suggested to use the throwaway suction pipeline.

Weak suction tubes interface specification: Ф7mm

Strong suction tubes interface specification: Ф11mm

3. Disinfection of the spittoon

Use running water to wash the spittoon first, use alcohol after is OK.

4. Disinfection of the three-way syringe

Press the button of the three way syringe and take down the nozzle, then Sterilize

the nozzle in the high-pressure, high-temperature, vacuum, and disinfection box,

put it back to the rack when it finish disinfection.

Spare parts replacement:

1. Protector tube replacement

Have assembled a fusible cut-out for avoiding causing bad effects on consumer's current supply network because of this machine short circuit malfunction on this machine circuit, the fusible cut-out assembles within dental chair front cover , the step is in progress time replacement according to the following:

• Break previous step equipment power source up (allocate away the power source attachment plug)
• Before opening the dental chair, cover uses hand whorl to come untied being sure that cover takes out the insurance tube already having burned.
• Be in charge of according to marking, putting new corresponding insurance in.
• Handle according to as said or narrated above contrary step.
• Protective tube specification: 5A Ф 5×20mm

FAQ:

1. How to place the order?

Please send inquiry to us. We will help you confirm the products and the quantity you need, and send you

the invoice and payment information.

We can accept the payment by T/T, Paypal and Western Union.

2. Can you provide samples? Are the samples free?

For small products, such as endo files, dental burs, acrylic resin teeth, retractors, and other small materials,

we can provide free sample, but the buyer need to pay the freight in advance.

3. How about the warranty?

For non-consumable products, like dental chair, X ray unit, ultrasonic scaler etc, we can provide one year warranty.

Please provide photo or video to describe the problems, we will suggest solutions or send spare part. Shipping cost

will be undertaken by the buyer.

4. Do you have CE or FDA for your products?

Yes, most products have CE and FDA certificates. Our products have been exported to many countries successfully.