GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 30 Sets Per Month |
| Delivery Time | 60 work days |
| Packaging Details | Wooden Box or Vacuum Packing |
| Stock width | 20~300mm |
| Stock thickness | 0.3~3.2mm |
| Stock thickness*Stock width | 2.0*200/3.2*80 |
| Pass line | 70~170mm |
| Releasing Performance | ~80 |
| Motor | Yaskawa |
| Bearing | Japan NSK |
| Main Motor | AC0.75 |
| Condition | New |
| Brand Name | RUIHUI |
| Model Number | MAC4-400 |
| Certification | CE, ISO certification |
| Place of Origin | Guangdong, China (Mainland) |
View Detail Information
Explore similar products
Pneumatic Servo Feeder Decoiler And Straightener Tube Flattening Punching
Left And Right Offset Feeder Decoiler And Straightener Metal Wafer Stamping
Heavy - Duty Material Frame Decoiler And Straightener Aluminum Die Stamping
Two - Stage Leveling Machine Metal Aluminum Stamping High Precision Feeder
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 30 Sets Per Month |
| Delivery Time | 60 work days | Packaging Details | Wooden Box or Vacuum Packing |
| Stock width | 20~300mm | Stock thickness | 0.3~3.2mm |
| Stock thickness*Stock width | 2.0*200/3.2*80 | Pass line | 70~170mm |
| Releasing Performance | ~80 | Motor | Yaskawa |
| Bearing | Japan NSK | Main Motor | AC0.75 |
| Condition | New | Brand Name | RUIHUI |
| Model Number | MAC4-400 | Certification | CE, ISO certification |
| Place of Origin | Guangdong, China (Mainland) |
The amount and direction of feeding error are not necessarily the cause of the failure:
1. There is metal or other foreign matter entering the feeding roller or gear.
2. There is interference between the feeding cam, the relaxing cam and the timing of the punching action.
3. When the material is fed into the feeder, the roller will slip.
Corresponding troubleshooting methods:
1. Remove foreign matter from the rollers or gears.
2. Adjust the micro switch (L, S).
3. Increase the pressure of the roller.
2 times the amount of feed failure occurred:
1, often happens.
2. The punching action is once, and the feeding action is twice.
Corresponding troubleshooting methods:
1. Check if the micro switch and wire terminal of the NC feeder start to have noise interference; if there is noise interference, replace the wire between the micro switch and the terminal block.
2. Reset or replace the micro switch (L, S)
The reason why the roller does not relax is:
1. The positioning guide pin in the mold is not effective.
2. The time for the feeder roller to relax is not correct.
3. There is an offset phenomenon in the feeding direction.
4, the roller does not go smoothly.
5. The micro-switch
Specification:
| Model | MAC4-400 | MAC4-600 | MAC4-800 | MAC4-1000 |
| Stock Width(mm) | 70-400 | 70-600 | 70-800 | 70-1000 |
| Stock Thickness(mm) | 0.6~6.0 | 0.6-6.0 | 0.6-6.0 | 0.6-6.0 |
| Max.Coil Weight(kg) | 5000 | 5000 | 7000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |
| Coil I.D.(mm) | 8 | 8 | 508 | 508 |
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* |
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 |
| Work Roll Number(pieces) | upper 4 lower 3 | upper 4 lower 3 | upper 4 lower 3 | upper 4 lower 3 |
| Feed Roll Number(set) | 1 | 1 | 1 | 1 |
| Main Motor(kw) | AC5.5 | AC7.5 | AC7.5 | AC11.0 |
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic |
| Reel Motor(kw) | 2.2 | 2.2 | 3.7 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.6-1.3 | 400 | 600 | 800 | 1000 |
| 2.0 | ||||
| 2.3 | ||||
| 2.5 | ||||
| 2.8 | 933 | |||
| 3.2 | 714 | 714 | ||
| 4.0 | 457 | 457 | 457 | |
| 4.5 | 361 | 361 | 361 | 361 |
| 5.0 | 293 | 293 | 293 | 293 |
| 6.0 | 203 | 203 | 203 | 203 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
SW signal of the punching cam is not normal.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2000
Total Annual:
30000000-50000000
Employee Number:
200~300
Ecer Certification：
Active Member
RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the origina... RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the origina...
Get in touch with us
Leave a Message, we will call you back quickly!