GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 30 Sets Per Month |
| Delivery Time | 30 work days |
| Packaging Details | Wooden Box or Vacuum Packing |
| Condition | New |
| Stock width | 20~800mm |
| Stock thickness | 0.3~3.2mm |
| Stock thickness*Stock width | 1.0*800/3.2*50 |
| Pass line | 70~170mm |
| Releasing Performance | ~80 |
| Motor | Yaskawa |
| Bearing | Japan NSK |
| Main Motor | AC2.9 |
| Brand Name | RUIHUI |
| Certification | CE, ISO certification |
| Place of Origin | Guangdong, China (Mainland) |
| Model Number | MAC2-800 |
View Detail Information
Explore similar products
Pinch Rolls Pressing Arm Metal Steel Coil Uncoiler with Straightener Line
Automatic Metal Strip Material Stamping Decoiling And Straightening Machine for
Automatic Metal Stamping Conveyor Manual Decoiler Straightener Feeder for
2460mm height 140'S 45# Decoiling And Straightening Machine
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 30 Sets Per Month |
| Delivery Time | 30 work days | Packaging Details | Wooden Box or Vacuum Packing |
| Condition | New | Stock width | 20~800mm |
| Stock thickness | 0.3~3.2mm | Stock thickness*Stock width | 1.0*800/3.2*50 |
| Pass line | 70~170mm | Releasing Performance | ~80 |
| Motor | Yaskawa | Bearing | Japan NSK |
| Main Motor | AC2.9 | Brand Name | RUIHUI |
| Certification | CE, ISO certification | Place of Origin | Guangdong, China (Mainland) |
| Model Number | MAC2-800 | ||
| High Light | decoiler and straightener ，hydraulic straightening machine | ||
There are often some minor faults when using the feeder, and the servo feeders generally have the following five types of faults:
1. The feeding error has a fixed direction. There are several reasons for this problem: the pressure of the feeding roller is insufficient; the feeding length is too long or too short; the mold has burrs or foreign objects.
For different solutions, increase the pressure, the width of the coil and the appropriateness of the mold guide plate, or whether the tool and the NC feeder are in line, check the baffle and the stripper.
2. Sudden error during feeding. In this case, the NC feeder has an error in the adjustment of the material. Whether the leveling machine and the servo feeder match or the distance between the leveler and the NC feeder and the height of the material arc Whether the number of revolutions of the punch is appropriate or not, and the transmission gap between the roller and the servo motor is relatively large. At this time, just tighten the belt of the pulley.
3. The error of feeding quantity and the direction are not allowed. Generally, metal or other foreign matter enters the feeding roller or gear, and the timing of feeding start, relaxation and punching action interferes. When the material is fed into the feeder, the roller will slip. Knowing the cause of the failure only requires a really different problem to make adjustments.
4. the feeding amount is twice or more than usual, this situation often occurs, should immediately check the servo feeder to start the micro switch and wire terminals, etc. whether there is noise interference; if there is noise interference, replace the micro switch The wire between the terminal block and the terminal block. A metal mesh isolation line is used.
5. sometimes the roller will be loose, this is due to the abnormal vibration of the micro switch SW signal of the punching cam and the offset of the feeding direction, and the air pressure component is not working properly. At this time, only the air pressure component needs to be adjusted. Properly replace or replace the solenoid valve, cylinder, piping, etc., and check if the wire is disconnected or replace the micro switch or replace the relay in the electrical box.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2000
Total Annual:
30000000-50000000
Employee Number:
200~300
Ecer Certification：
Active Member
RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the origina... RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the origina...
Get in touch with us
Leave a Message, we will call you back quickly!