Waste Plastic Recycling to Oil Plant

Product Specification

http://www.cntyreoil.com/8ton-per-batch-waste-tyre-recycling-to-oil-machine/

Waste Plastic Recycling to Oil Plant can be used to refine oil by using waste tyre, waste plastic and rubbers recycling to crude oil, carbon black, steel wire and gas, and then after distillation will get diesel oil. Heating materials can use wood, coal, fuel oil, nature gas and electricity. They are widely used in hotels, restaurants, bathing center, power plant, engines and chemical sector and so on.We manufacture and supply waste tyre & plastic pyrolysis plant, and has been exported to India, Pakistan,Thailand, Korea, South Africa, Mexico, Romania, Albania European countries and so on.

2. Waste Plastic Recycling to Oil Plant Flow:

tire broken → automatic feed → catalytic cracking → oil-water separation → cooling liquid → carbon black emission → carbon black processing → crude oil → flammable gas recovery → flammable gas combustion → desulfuration removal.

3. Main Feature of Waste Plastic Recycling to Oil Plant

1). Heating System

Reactor: Using Q245R boiler plate and the thickness is 12mm, 14mm, 16mm , the thickness would be changed according the customers'requirments.

The main engine use horizontal-type of 360°structure-0.8 r/min

2). Separation System

Gas separator & Depositing tank: Depart the heavy oil and impurities from the oil gas to purify the oil.

3). Condensing System

Generally speaking , for all the raw material all be finished by heating to gasification and cracking, and then cooling to get oil, so they key is the relationship between the yield rate and condensation. So the best and easy way is to increase the condense area so as to get higher yield rate.

4). Dedusting System

Desulfurization dedusting, Water film cyclone, Desulfurization dedusting:remove the sulphur(when use coal as fuel) and dust

Water purification: for the second removal.

5). Waste Gas Recycles System

Water seal & Spray fire gun: In the process of refining oil, when the gas is heated up to 150 , it will produce a large amount of gas CH4&C4H8 ,which cannot convert to liquid at normal temperature and normal pressure. However, these gases can be used as fuel, which is not only environment protection but also energy conservation

6). Carbon Black Recycles System

Heaving dragon screw conveyer: The solid residual will be left after the catalyst splitting from scrap plastic, approximately take up 5% to 10% of the waste tire.

Its main component is the black carbon, which can be used as raw materials in industry, as well could be mixed with the pulverized coal ash to produce the raw material of the thermal power plant, and also could be applied to the manufacturingof the pulverized coal ash brick (one kind of environmental protection building material).

4. Final products

5. Output Products Percentage(take truck tyre for example):

6. Application of Tyre Pyrolysis Oil & Carbon Black

1). The Usage of Final Production ------Fuel Oil

Fuel oil from waste tyre are used in below industries:

A. Power plant factory

B. Glass factory

C. Cement factory

D. Ceramic factory'

E. Aluminum factory

F. Boiler factory

G. Central heating factory

H. Painting factory

2). The Usage of Final Production ------ Carbon Black

Carbon black from waste tires are used in below industries:

A. Electric cable jacketing

B. Conveyor ban

C. Hose and doormat

D. Black nylon bag

E. Rubber additive

F. Automatic spare parts

G. Heat Isolation

H. Black colorant in rubber materials

I. Plastic pipes

J. Industries rubber products

K. Fire fighting

3). Steel wire from waste tires can be re-sale to steel factory.

7. Profitability Analysis

Take waste tires oil refining equipment processing 10 tons for example:

8. Enviromental Friendly Feature

Water includes two parts: First, condensing water, it can be recycled,water release is that pour into, no pollution, only a little high temperature. Second, dust removing water, it must be polluted water, but it also can be recycling, just pour into no discharge. .

Gas includes two parts: First, exhaust, our equipments have advanced exhaust gas recovery system; we can recycling and reuse it. Second, smoke dust, it is generated from burning coal or exhaust, after the treatment of dust removing device, can meet the emission standards of national requirements.

9. Safety Operation Feature

1). Professional sealing technology for cover, oil outlet.

2). Heavy oil is separated which can avoid the problems of jam in later condensing.

3). Vacuum system will prevent exhaust gas from going back to reactor and causing accident.

4). Alarm, safety valves, thermometer, pressure gauge and safety valve.

5). It is dangerous to burning exhaust gas (C1 to C4). In our process, it is transferred first through the safety device and a safety burning air muzzle. Before burning, we should ensure the safety of production.

10. After Sale Service for Waste Plastic Recycling to Oil Plant

1). Installation and Training: Our Company will send 1 technician for guiding your installation, testing the machine and training your workers. The installation period shall be 20 days. You shall pay salary for the technician with $80 per day and also the round-trip ticket and accommodation.

2). Warranty:

a. the reactor guarantee period shall be 60 months.

b. Transmission Equipments guarantee period shall be 36 months.

c. Valve, meter and switch box guarantee period shall be 24 months

Welcom to Contact Us for Cooperation

SKYPE:  romiter2000  Viber/whatsapp: 0086-18660054220   Email: info@romiter.com  Website:www.cntyreoil.com