Shanghai Zhoubo welding & cutting technology CO.,LTD.
| Payment Terms | T/T or western Union |
| Supply Ability | 10,000pcs per month |
| Delivery Time | Prompt goods |
| Packaging Details | Manufacturer packing |
| Product Name | Plasma Consumables |
| Application | Plasma Cutting Machine |
| Standard | Manufacturer production standard |
| type | HSD130 |
| Brand Name | Plasma Consumables |
| Model Number | HSD130 |
| Certification | ROHS/ SGS |
| Place of Origin | China |
View Detail Information
Explore similar products
HT4400 / HT4001 Plasma Consumables For Plasma Cuttting Machine
Nozzle 020611 100A For Max200 / HT2000 Plasma Consumables
Oxygen Nozzle 020605 Plasma Cutting Consumables For Max200 / HT2000
Plasma Cutter Consumables MaxPro200 For Plasma Cuttting Machine
Product Specification
| Payment Terms | T/T or western Union | Supply Ability | 10,000pcs per month |
| Delivery Time | Prompt goods | Packaging Details | Manufacturer packing |
| Product Name | Plasma Consumables | Application | Plasma Cutting Machine |
| Standard | Manufacturer production standard | type | HSD130 |
| Brand Name | Plasma Consumables | Model Number | HSD130 |
| Certification | ROHS/ SGS | Place of Origin | China |
| High Light | plasma cutting nozzle ，max 200 parts | ||
HSD130 Plasma Cutter Consumables For Plasma Cuttting
We can offer you all plasma consumables for , Kjellberg, Esab, Koike, Komatsu, Thermadyne, such as: electrode, nozzle, shield, swirl ring, inner cap, retaining cap, water tube, torch body and so on.
Each of our products has been tested with a rigorous precision instrument, A large number of piercings tests and service life tests, And made batch trial in our customers. If all results are good, then we will producing them.
| Machine | HEC NO. | Ref NO. | Description |
|
HSD 130 | H03528 | 220528 | Electrode,(Air)45/(Oxygen)50Amp |
| H02487 | 220487 | Electrode,(Air)130/(Oxygen)130Amp | |
| H03415 | 220415 | Electrode,130Amp (N2,H35) | |
| H73529 | 220529 | Swirl Ring,(Air)45/(Oxygen)50Amp | |
| H72488 | 220488 | Swirl Ring,(Air)130/(Oxygen)130Amp | |
| H13525 | 220525 | Nozzle,45Amp (Air) | |
| H13530 | 220530 | Nozzle,50Amp (Oxygen) | |
| H13492 | 220492 | Nozzle,130Amp (Air) | |
| H13489 | 220489 | Nozzle,130Amp (Oxygen) | |
| H13535 | 220535 | Nozzle,130Amp (N2,H35) | |
| H33578 | 220578 | Retaining Cap 45/50/130Amp (Air,Oxygen) | |
| H33534 | 220534 | Retaining Cap 45/130Amp (N2 and F5,H35) | |
| H23532 | 220532 | Shield,(Air)45/(Oxygen)50Amp | |
| H22536 | 220536 | Shield,130Amp (Air) | |
| H22491 | 220491 | Shield,130Amp (Oxygen) | |
| H03415 | 220415 | Electrode,130Amp (N2,H35) | |
| H03535 | 220535 | Nozzle,130Amp (N2,H35) | |
| H33534 | 220534 | Retaining Cap 45/130Amp (N2 and F5,H35) |
Technical Support:
The problem of plasma cutting
5.1 no high frequency guidance arc
Check high frequency arc ignition circuit, first check the 110VAC, and observe the G1, G2 whether there is discharge sparks exist. If not, generally 110VAC did not come or fixed G1, G2 plastic board damp, damp after G2, G1 can not discharge and produce high pressure. Drying wood glue with a hair dryer to restore 110VAC. If there is still no guide arc, should check the high frequency arc, due to the high frequency of the skin effect, the high frequency line and the nozzle of the conductive ring is not good or because of the reasons for the sealing ring and the cooling water will not have a short circuit. Open the cutting gun, tighten the high frequency line or replace the sealing ring, generally can solve the problem.
5.2 there is no cutting arc
In the case of a high frequency spark observed, first check whether there is an open circuit voltage 400VDC. If not, check whether the phase of the three-phase power supply. High power silicon controlled rectifier and trigger circuit board in power supply box. If the power supply is normal, open the PLC control box, check the PLC input and output signals. The input consists of cooling water, cutting water flow signal, nitrogen and oxygen pressure signal. Cutting water flow signal without cooling water, cooling water pump should be replaced, without cutting the pump; nitrogen, oxygen pressure signal should be tested for nitrogen, oxygen source, and check whether the pipeline leaks. Such as the start conditions are met, will have to check the cutting gun, electrode rod sealing ring or the nozzle seal damage will water seeping into the cavity between the electrode and nozzle, leading to short-circuit DC power supply and the nozzle, can not form a loop with the workpiece. Replace the sealing ring, re assembled torch that can solve the problem.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2007
Total Annual:
4,000,000-6,000,000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
We are a professional manufacturer of plasma cutter consumables, Our company is located in the Shanghai City, China ,it was established in 2007,but we had 10 years manufacturing experience in this field, the new factory covers an area of more than 10000... We are a professional manufacturer of plasma cutter consumables, Our company is located in the Shanghai City, China ,it was established in 2007,but we had 10 years manufacturing experience in this field, the new factory covers an area of more than 10000...
Get in touch with us
Leave a Message, we will call you back quickly!