Air Supply Outlet HVAC Damper Production Line With 3C Certification

Product Specification

Positive Pressure Air Supply Outlet Production Line

Positive Pressure Air Supply Outlet Machine Brief Introduction

Our automatic Positive Pressure Air Supply Outlet Production Line is high efficiency machine, it is developed based on fully absorbing abroad competitors' advanced experience, it applied new crafts, new techniques and solved effectively many problems brought plate without any damages. the fire damper produced by it doesn't need weld and rust prevention treatment, and guarantees the zinc coating of zinc with any damages, which conforms to the national environmental protection requirements, its full line achieved standardized, intelligent and high efficiency production, reduced product period greatly, saving time and labor, and reduced the scrap rate of product, which is the idea equipment for batch production of fire VCD damper.

The whole solution for Positive Pressure Air Supply Outlet Production roll forming line are including outer damper frame roll forming machine, positive pressure air supply outlet production line, blade roll forming machine, support roll forming machine, stainless steel spring profile roll forming machine, riveting platform, copper sheathing, square shaft making machine, etc.

Technology specification of Positive Pressure Air Supply Outlet Production Line

The VCD frame profiles production Line is designed according to 1.5-2.0mm thickness GI Steel. The VCD damper frame profile production line is consisted of uncoiler (manual), leveler and hydraulic press, hydraulic cutter, strip feeding table, roll form machine, hydraulic bender, hydraulic system, electrical control system, etc.

Basic components

-. UNCOILER 1set

- Leveler 1set

- Notching (big and small) 2sets

- Punching installation holes moulds 1set

- Punching baffle holes moulds 1set

- Hydraulic cutter 1set

- Strip feeding table 1set

- Damper outer frame Roll former - adjustable width 1set

- Hydraulic folder 1set

- CNC control system 1set

- Hydraulic system 2 sets

Function Description

- Double servo driving, full automation operation

- Damper frame width: 200/240mm; adjustable

- Damper Frame type: L Type; hollow square; single chip

- Efficiency: 350pcs / 8 hours

- Continuous production order model process

- Accordance with 3C certification specification

Main parameters of damper frame production line

Fire VCD Damper frame Brief introduction

The Positive Pressure Air Supply Outlet is used for pressurized air supply in the event of fire. Though the positive pressure air supply outlet, it will continuously supply air to the front room, so that the front room maintains a positive pressure to ensure that the smoke will not spread in this area. where people can escape at this space.

When the temperature is higher than 280 °C, no possibility of escape, their internal fuses will be blown, and the fire damper will automatically close to prevent the fire from spreading. It is usually installed on the wall of the stair front room and the smoke prevention shaft. It can also be installed on the side of the smoke control system pipe or at the end of the air duct.

Normally this damper is closed, and can be opened by electric and manual control.