Shenzhen Creatall Electronics Co., Ltd.
| Supply Ability | 1000 Piece/Pieces per Day |
| Delivery Time | 5-8 work days |
| Product Model | CA-2S-20A |
| Charging voltage | 8.4V - 9.0V |
| Continuous discharge current (upper limit) | 20A |
| Continuous charge current (upper limit) | 10A |
| Product Size | 45*15*3.4mm (Standard), 48*20*3.4mm (Balancing) |
| Brand Name | Creatall |
| Model Number | CA-2S-20A |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
3S 4S 25A 40A 60A BMS Battery Protection Board Li Ion Battery Charging Board
10A 8.4V 18650 2s Bms Board power supply module 46.7 * 23 * 3.15mm
Creatall PCB PCM 4S 20A Bms Charging Board Dc Dc Converter
5S 18.5V BMS Battery Protection Board Battery Charging Protection Board 21V
Product Specification
| Supply Ability | 1000 Piece/Pieces per Day | Delivery Time | 5-8 work days |
| Product Model | CA-2S-20A | Charging voltage | 8.4V - 9.0V |
| Continuous discharge current (upper limit) | 20A | Continuous charge current (upper limit) | 10A |
| Product Size | 45*15*3.4mm (Standard), 48*20*3.4mm (Balancing) | Brand Name | Creatall |
| Model Number | CA-2S-20A | Place of Origin | Guangdong, China |
| High Light | 20A 18650 Lithium Battery Protection Board ，Standard Diy Bms For 18650 ，Balance Diy Bms For 18650 | ||
Report Item
Applicable scope: Suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)
Product Size: 45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)
Charging voltage: 8.4V - 9.0V
Continuous discharge current (upper limit): 20A (If the cooling environment is not good, reduce the load current use)
Continuous charge current (upper limit): 10A
Standard Edition: Suitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.
Balanced version: Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.
Note 1: The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)
Note 2: Connect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.
Note 3: When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected. For some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2004
Total Annual:
2000000-7200000
Employee Number:
150~200
Ecer Certification：
Verified Supplier
Shenzhen Creatall Electronics Co.,Ltd was founded in 2004,is a leading manufacturer and supplier of various modules, specializing in power supply modules, amplifier audio modules,BMS battery protection modules, Bluetooth modules,PWM motor speed controller,Lcd led Inverter board,voltmeter and other r... Shenzhen Creatall Electronics Co.,Ltd was founded in 2004,is a leading manufacturer and supplier of various modules, specializing in power supply modules, amplifier audio modules,BMS battery protection modules, Bluetooth modules,PWM motor speed controller,Lcd led Inverter board,voltmeter and other r...
Get in touch with us
Leave a Message, we will call you back quickly!