Shaoxing Nante Lifting Eqiupment Co.,Ltd.
| Payment Terms | L/C, T/T |
| Supply Ability | 1000pc/day |
| Delivery Time | 7 days |
| Packaging Details | carton |
| Model NO. | N35MTA |
| HS Code | 843149 |
| Material: | Galvanized Steel+ABS |
| Standard Length | 4m or 6m |
| Travel Speed: | <300m/Min |
| name | I Beam Festoon System |
| Brand Name | NANTE |
| Certification | ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
Galvanized Steel Cable Trolley / Middle Trolley on I Beam Festoon System W35MCT
Galvanized Steel Ball Bearing Hardened I Beam Trolley For High Capacity Stowing
Pendant Control System I Beam Trolley Crane Cable Carrier Trolley Of Steel
Anti Explosion Festoon Cable Trolley On I Beam Power & Control To Mobile
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 1000pc/day |
| Delivery Time | 7 days | Packaging Details | carton |
| Model NO. | N35MTA | HS Code | 843149 |
| Material: | Galvanized Steel+ABS | Standard Length | 4m or 6m |
| Travel Speed: | <300m/Min | name | I Beam Festoon System |
| Brand Name | NANTE | Certification | ISO |
| Place of Origin | China | ||
| High Light | I Beam Festoon System ，h Beam Trolley | ||
Product introduction
I-Beam Festoon System is used in hanging and moving for mobile power supply mechanical cable. It has been widely used in all kinds of hoisting machinery. The device is of firm structure, flexible movement, safety and reliability. Light load type cable conduction is made up by three parts including towing trolley, middle trolley and end trolley. The towing trolley follows a moving mechanical traction sheave guide rope traction device, each of which configures 1 towing trolley to run back and forth with the mobile machinery. Middle trolleys follow the towing trolley with the cable hanging within the scope of I-beam rail traction, and the slow clashes is equipped on both ends of them. The number of trolleys depends on different length of mobile. End trolley is fixed at the end of I-beam rail, general each mobile machinery set 1.
Install Caution
1, Fixed line installed, should be hung behind a baffle.
2, Adjust the drawing head, make the car in the whole trip without touching traction hole top and bottom edge as well.
3, Cable length for crane span 1.2 instead of 8 meters.
4, Adjust the traction rope, make its length is less than the section with cable length, runtime by load cable force.
5, When the cable diameter range, should pad between cable clamp with soft rubber, make its have the same diameter, so that the cable clamp.
6, Cloth cable, both sides should consider cable plate stress equilibrium.
7, When the cable pulley is on the second floor for the same.
8, The double gasket on the block device for adjusting washers, when the guide rail is improper, put the washer on the inside of the fixed plate, in order to adjust the track width, the factory according to the guide for 100 * 68 120 70 140 * 80 * 70 * 140.Non-standard block processing system according to the drawing.
Technical Feature
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1994
Total Annual:
100000000-15000000
Employee Number:
400~500
Ecer Certification：
Active Member
NANTE: After 20 years rapid development, NANTE and its parents company ZHONGJIAN Group has grown into a leading integrated solution provider for crane and crane components in China. Dedicated to the research and development of new lifting and handling technologies, we adopt innova... NANTE: After 20 years rapid development, NANTE and its parents company ZHONGJIAN Group has grown into a leading integrated solution provider for crane and crane components in China. Dedicated to the research and development of new lifting and handling technologies, we adopt innova...
Get in touch with us
Leave a Message, we will call you back quickly!