IP65 Push Button Crane / Hoist Pendant Control AC400V / DC230V

Product Specification

IP65 Push Button Crane / Hoist Pendant Control AC400V / DC230V

Detailed Product Description

IP65 Push Button Crane Industrial Remote Controls , AC400V / DC230V

• Standard: IEC 60947-5-1, EN 60947-5-1
   
• Protection class: IP65 conforming to IEC 60529
   
• Electric rating: AC50/60Hz, AC400V/DC230V
   
• Enclosure: Material: ABS
   
• Color: Yellow; Black is optional
   
• Mechanical interlock between 1 group contact
   
• Speed: Single speed or double

Remote control, hoist switch, crane switch, crane push button, hoist station, COBP pendant control station, push button for hoist and crane, push button switch for hoist and crane. Pendant crane control station switch

description:

COBP serried of two-speed lifting equipment to control button box, a combination of the domestic appliances industry technology and user needs combined with foreign industrial crane control to improve the absorption components, focus on the rationalization of mechanical design, reasonable structure, advanced technical performance; the Company and in accordance with market demand for the development of multi-button combinations of control, more fully functional, and electrical control circuit in accordance with the requirements of any button to choose a different combination of features and easier to control the use the equipment.

application:

Switch using high-quality engineering plastics, shell products to enhance performance and anti-collision light housework; electrical contact using conductive copper-based, plus access to some of the use of silver-nickel alloy material, by a contact in the weak capacity and control system stability. Control button in handle and control the installation of waterproof seals and silicone cable jacket, the dust have a good waterproof performance, to achieve IP65 protection grade level.

   This product applicable to more than the dust, outdoor open-air, rain and snow is more susceptible to abuse, such as operating environment; products electric hoist for lifting, outdoor transportation machinery, construction machinery, such as landing and taking off the remote control of electrical cable systems.

Models and mesning

Normal working conditions

Environment temperature is between +40℃ and -25℃

Allowable temperature; At the temperature of 40℃ and average humidity 90% can switch and be used in places encroached on by rain and snow.

In non-explosive medium; the medium should not corrode the metal and rubble to avoid the insulation destroyed.

Product outside view

Functional codes of buttons and electric diagram(see fig)

Wire installation and precautions:

Remove the end cap and case the wire of the proper size into the rubber protective sleeves(the part too small to fit the cable should be cut off) to make sure that both are well matched. Otherwise necessary measures should be taken to ensure good airtighmess.

Remove the rear cap. Connect the control wire and note that the control wire should keep the same direction as that of button control. After the end cap and rear cap are fixed, please check the sealed parts are even and all the screws must be even screwed up so as to maintain the due airtightness.

After a certain duration of service, check and replacement should be arrived. Out, if damage are found to ensure the desirable waterproof for maintain and more safety.