Firefighting Mobile 12MPa Pressure Water Mist Fire Extinguisher

Product Specification

Mobile high pressure water mist fire extinguishing device

1,Product description

Mobile high pressure water mist fire extinguishing device is suitable for fire fighting in large workshop workshop, commercial place, community, station, tunnel, storehouse, machine room, square, construction project and so on.

The device is compact in volume, easy to move, can reach the fire site quickly, and the operation is simple and convenient. Choose gasoline engine as power source, easy to use and keep, can provide power continuously. High pressure water mist water gun (DC + atomization dual function) can quickly change the long distance injection or close range large area injection mode according to the fire situation. 50 meters high pressure wear-resistant soft pipe, can be directly dragged into the fire.Equipped with KN65 fire protection interface, can be docked with fire hydrant through water belt, water supply by fire hydrant, to achieve continuous fire extinguishing.

This device takes into account water mist fire extinguishing and foam fire extinguishing, has high fire extinguishing performance and large fire extinguishing range, and is suitable for A,B kinds of fires, and can directly extinguish electrical fires below 1000 V.

Water mist is harmless to human body, has no effect on the environment, and will not produce harmful decomposition substances under high temperature. Because of its efficient cooling effect and obvious absorption of soot, it is more conducive to the escape and rescue of fire scene personnel.The fine water mist has good penetration, which can solve the problem of occlusion. The steam formed by the fine water mist can cover the burning matter and effectively prevent the fire from spreading and rekindling. Compared with other conventional water spray fire extinguishing equipment, the water consumption of fine water mist fire extinguishing mode is greatly  reduced, the energy consumption of the system is reduced, and the volume of fire water tank is reduced.with good electrical insulation performance.

The mobile high pressure water mist fire extinguishing device shall not be used to extinguish the following fires: fire in which water reacts and causes combustion, explosion or the production of a large number of harmful substances; fire in which water produces flammable gases; and fire in which water produces a highly boiling flammable liquid.

2,Product characteristics

• Safety and environmental protection, no damage and pollution to the environment, personnel.
• Efficient fire extinguishing and quick control of fire.
• The device is flexible, fast and efficient, and can be sprayed at long distance.
• Simple operation, low cost of use and maintenance.
• large size tire, make the equipment move smoothly, the obstacle-crossing performance is superior.
• 50 meters high pressure wear-resistant soft pipe, can be dragged directly into the fire.
• The surface of the equipment adopts the automobile baking paint process, which is suitable for use under any conditions.
• Equipped with DN65 interface, can directly connect fire hydrant to achieve long time fire extinguishing.
• With electric start and hand-in-hand start, start fast, smooth and reliable.
• Equipped with anti-collision device, can effectively protect the equipment.
• Both water and foam fire extinguishing media can be used.

extinguishing level :25 A,297B, water mist mode can directly extinguish electrical fires below 1000 V.

• machine size (mm):1400*790*1050(length*width*high).
• machine weight (kg):169kg (without water).
• Pump set rated working pressure :12 MPa.
• Pump group rated flow :43 L/min.
• Engine: gasoline engine ,15 HP.
• Start mode: electric start, hand pull start.
• Water spray pressure :6 MPa
• Water spray flow :23 L/min
• ★ water spray distance :18 m
• Fine water spray pressure :9 MPa
• Flow of water mist spray :23 L/min
• ★ water mist spray distance :14 m
• ★ tank capacity :152 L.

★ high pressure hose length :50 meters.