Shandong Geological & Mineral Equipment Ltd. Corp.
| Supply Ability | 2 sets per month |
| Packaging Details | nude |
| Delivery Time | 15-20 days |
| Payment Terms | T/T, L/C |
| usage | water well |
| chassis | 8-tyre trailer |
| drilling tech | turnplate rotary |
| power | 65kw diesel |
| mud pump | 850L/min, 20mpa |
| drill tower | 11.6m height |
| drill rod | 6.5m per piece |
| hoist | 2 sets |
| max drill depth | 300m |
| hole diameter | 450mm |
| Brand Name | JINLUDI |
| Model Number | SPJT300 |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Steel Crawler Truck Mounted Water Well Drilling Machine For Rock Stratum
Blue Water Drilling Machine With High Hydraulic Leg / Safety Water Well Rig
Graveland Pebble Water Drilling Rig , Rock Stratum Water Well Drilling Equipment
Eight - Tyres Trailer Chassis Farm Water Well Drilling Rig With Tricon Bit
Product Specification
| Supply Ability | 2 sets per month | Packaging Details | nude |
| Delivery Time | 15-20 days | Payment Terms | T/T, L/C |
| usage | water well | chassis | 8-tyre trailer |
| drilling tech | turnplate rotary | power | 65kw diesel |
| mud pump | 850L/min, 20mpa | drill tower | 11.6m height |
| drill rod | 6.5m per piece | hoist | 2 sets |
| max drill depth | 300m | hole diameter | 450mm |
| Brand Name | JINLUDI | Model Number | SPJT300 |
| Certification | CE | Place of Origin | China |
| High Light | hydraulic water well drilling machine ，truck mounted rotary drilling rig | ||
trailer chassis water drilling rig
SPJT300 Water Well Drilling Rig is installed on a trailer. This drilling rig can work through rotary mud circulation or DTH drilling technique. SPjT300 trailer chassis water well drilling rig is suitable for clay, sand, graveland pebble, and rock stratum. We add special device to add & reduce pressure during drilling which can enhance efficiency a lot. High hydraulic leg and hydraulic tower are chosen to save labor and keep safety during working.
◎ when drilling, the drilling rig uses an independent diesel engine as power, and uses mechanical transmission to make the mechanical winch and rotary table work at the same time;
◎ the drilling rig is equipped with four hydraulic support legs, which can move at the same time as well as independently, facilitating quick leveling of the drilling rig. Moreover, the two rear legs can extend horizontally, thus improving the stability of the whole drilling rig. Using hydraulic cylinders to lift the tower is convenient, reliable and simple to use, which can meet the construction requirements of different working conditions to the greatest extent.
◎ the main parts of the drilling rig, such as winch, turntable, gearbox, tower and chassis, are produced by our factory independently, with stable and reliable performance.
◎ the drilling rig is suitable for drilling high-rise buildings, bridges, geological mines, ports, dam foundations, water well construction, complicated ground source heat pump, etc.
◎ the drilling rig is simple to operate, has strong usability, convenient maintenance, less investment and quick effect, and is the best product for users.
MAIN PATAMETER
| drilling hole diameter | 500mm |
drill tower rated load | 180KN |
| depth | 300m |
drill tower height |
11.6m(SPJT300) |
|
turnplate max. torque | 8.0KN/m | dimension | 12m×2.47m×3.4m |
| speed | clockwise(reverse)44,77,139rpm | power | 80hp |
| turnplate diameter | 450mm | transportation status |
in bulk/trailer |
| lifting capacity of single rope of main hoist | 30KN | weight of main rig | 13.5t(SPJT300) |
| lifting capacity of single rope of secondary hoist | 20KN |
weight of drill rod, pipe &bit | 6.6t |
| Mud pump | BW850/20 (20Mpa pressure/850L/min) | ||
Configure of one set of spjt300
| no | code | name | quantity | remark |
| A | main rig | 1 group | ||
| 1 | 1C-0 | turnplate | 1group | |
| 2 | 2-0 | hoist | 1group |
Advanced gearbox and clutch |
| 3 | 3B-0 | transmission | 1group | Model 4135Na |
| 4 | FT0-0 | drill tower | 1set | |
| 5 | BW850/20 | mud pump | 1set | including all tools and hose |
| 6 | accessories | 1 set | (steel wire 80m plus 120m, protecting-cover etc.) | |
| B | tools | |||
| 1 | FG1-0 | water tap | 1 piece | |
| 2 | FG2-0 | block group | 1piece | |
| 3 | FG3B-0/8000 | kelly rod | 1piece | L＝7650mm |
| 4 | FG5-0 | lifter | 1piece | |
| 5 | FG7-4 | joint | 1piece | |
| 6 | FG8-0 | fork | 1piece | |
| 7 | FG9A-0 | fork | 1piece | |
| 8 | 2-6A-0 | shaft | 1piece | |
| 9 | 21/2" | hose | 1piece | |
| 10 | FG12-4/6500/R780 | drill rod 89*10*6500mm | 43 pieces | Material:R780 |
| 11 | FG7-1/2 | joint | 43pairs |
Mud pump Type |
| |
| Cylinder diameter | 150(mm)
| |
Stroke | 180(mm) | |
Pump speed | 82 r/min | 58r/min |
Flow | 850(L/min) | 600(L/min) |
Pressure | 2.0(MPa) | 3.0(MPa) |
Power | 37(Kw) | |
shape size | 2000*1030*1400(mm) | |
Weight | 1500(kg) | |
Company Details
Business Type:
Manufacturer
Year Established:
1992
Total Annual:
160000-250000
Employee Number:
105~110
Ecer Certification：
Active Member
ShangDong Geological&Mineral Equipment Ltd Corp was established in 1992 which consists of sales department,processing plant,international trade department, new product R&D and storage department. We are a spirited state-owned company. our company is loca... ShangDong Geological&Mineral Equipment Ltd Corp was established in 1992 which consists of sales department,processing plant,international trade department, new product R&D and storage department. We are a spirited state-owned company. our company is loca...
Get in touch with us
Leave a Message, we will call you back quickly!