Payment Terms | Western Union, T/T, MoneyGram, D/P, D/A, L/C |
Supply Ability | 1000m2/per pay |
Delivery Time | 10 working days |
Packaging Details | Wooden,cartons,custom package |
Condition | New |
Cooling Type | Cooling Tower Parts |
Material | PVC,PP,CPVC |
Warranty | 1 Year |
Name | PVC Cross flow cooling tower infill block media 750*2000mm Black Grey Cross Flow Cooling Tower Infill |
Width | 750/730/930/950mm |
Wave Height | 19-20mm |
Usage | Cooing Tower |
MOQ | 10 square meters |
Thickness | 0.32-0.6mm |
Brand Name | XL |
Model Number | XL-750-kken |
Certification | SGS |
Place of Origin | Jiangsu, China |
View Detail Information
Explore similar products
750mm Cooling Tower Fins Cross Flow Cooling Tower Fill Replacement
Counter Flow Cooling Tower Fins 305/610mm Cooling Tower Packing Material
S Shape Blue Cooling Tower Fins Waste Water Honeycomb Fill 31/33mm
Product Specification
Payment Terms | Western Union, T/T, MoneyGram, D/P, D/A, L/C | Supply Ability | 1000m2/per pay |
Delivery Time | 10 working days | Packaging Details | Wooden,cartons,custom package |
Condition | New | Cooling Type | Cooling Tower Parts |
Material | PVC,PP,CPVC | Warranty | 1 Year |
Name | PVC Cross flow cooling tower infill block media 750*2000mm Black Grey Cross Flow Cooling Tower Infill | Width | 750/730/930/950mm |
Wave Height | 19-20mm | Usage | Cooing Tower |
MOQ | 10 square meters | Thickness | 0.32-0.6mm |
Brand Name | XL | Model Number | XL-750-kken |
Certification | SGS | Place of Origin | Jiangsu, China |
High Light | PVC Cooling Tower Fins ,Block Cooling Tower Fins ,block Cross flow media |
The type cooling tower filler is made from PVC injection molding under high pressure,it has special structure form ,not only certain stiffness,but some flexibility. Due to good elasticity,the filler would chatter under the water-drop impact effect lead to some water-drop rebound to above for the water redistribution.
Prolong the residence time in the water in the packing,For heat and mass transfer, thereby increasing the, improved the packing heat dissipation effect.
Tech Date | |
Sheet Width(mm) | 730/750/930/950mm |
Sheet Length | 2000/1800/customized |
Thickness | 0.32-0.6mm/customized |
Sheet Spacing | 19-20mm |
Color | grey/white/black |
Material | PP/PVC/CPVC |
The fill is the most important part of the cooling tower, and its efficiency depends on the degree of sufficient contact between the cooling water and the air in the fill. The company's packing is temperature resistant* 1. It is easy to install, easy to clean, and easy to transport. The heat dissipation packing adopts a non-adhesive suspension type, which is easy to install and easy to clean, and successfully solves the problem of the deformation of the adhesive packing due to dust accumulation and self-weight. , and the fouling after deformation is more serious and difficult to clean. The filler has good flame retardant performance. After testing, the flame retardant oxygen index index is greater than 28.
* 2. The large "honeycomb" structure design has a diversion effect, which has a good uniform air distribution effect, improves and stabilizes the heat exchange intensity of water and gas, and the wind inlet end is inclined at an angle of 30 degrees, which effectively reduces the drift loss. The precise positioning and equal spacing combination is convenient to form a large-area flowing water film with the water flow perpendicular to the surface, which promotes the contact surface of the atmospheric air. , The unique and high-efficiency water eliminator is integrated with the packing, which effectively removes the water droplets in the hot and humid air and returns to the tower, which greatly reduces the loss of drifting water. The floating water loss rate is less than 0.001%.
1. Manual cleaning of the slag falling off in the cooling tower;
2. Rinse the packing repeatedly with a high-pressure water gun to remove the sludge and scale under cleaning;
3. Dissolve the TNB descaling agent with hot water at about 50°C, and then use the flushing pump to rinse the filler repeatedly until the scale is rinsed off (if the filler has a long service life, causing aging and collapse, it is recommended to replace the filler), and add algaecide at the same time. Completely kill biological algae and;
4. After confirming that all parts of the system are cleaned, drain the sewage;
5. Rinse the packing and the inside and outside of the tower body with clean water;
6. Restore all parts of the system, replenish water and use it;
7. After all recovery, please check and accept the management personnel of Party A;
8. Evacuate Party B's belongings and clean the site;
About US
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company,Seller
Year Established:
2014
Total Annual:
5000000-7000000
Employee Number:
30~50
Ecer Certification:
Verified Supplier
Wuxi Xianglong Plastic Technology Co., Ltd. was established in 2014 and is located in Jiangsu Province, near Shanghai and Ningbo Port. For the past few years, we have devoted ourselves to provide high quality products to the oversea markets. Our products mainly include Cooling Tower Accessor... Wuxi Xianglong Plastic Technology Co., Ltd. was established in 2014 and is located in Jiangsu Province, near Shanghai and Ningbo Port. For the past few years, we have devoted ourselves to provide high quality products to the oversea markets. Our products mainly include Cooling Tower Accessor...
Get in touch with us
Leave a Message, we will call you back quickly!