Disposable intravenous cannula 26G purple suitable for pediatric small blood

Product Specification

Disposable intravenous cannula 26G purple suitable for pediatric small blood vessels

Product features:

1. multi-bevel needle tip polishing technology to enhance sharpness and puncture success rate.

Catheter specific material, bending quickly back to its original shape, floating in the blood vessels, reducing the stimulation of the blood vessels, reducing the incidence of phlebitis and increasing the comfort of retention.

3. The testing standard is higher than the industry standard, and the production process is tested by automated equipment to avoid potential risks.

Color-coded casing cap allows for easier identification of catheter size

Translucent catheter hub and flashback chamber allows for easy detection of blood flashback at vein insertion

Precision finished FEP catheter assures stable flow and eliminates catheter tip kink during venipucture

Can be connected to syringe by removing filter cap to expose Luer taper end

Use of hydrophobic membrane filter eliminates blood leakage

Close and smooth contact between catheter tip and inner needle enables safe and smooth venepuncture

This product should be used by professionals, and healthcare professionals using this product should be trained in venipuncture techniques and be aware of the potential hazards involved. It should be used using aseptic technique, properly disinfecting the skin and keeping the puncture site clean.

Instructions for use:

1. medical personnel should check the package strictly according to aseptic operation, and remove the product if it is well sealed and not broken;

2. tighten the heparin cap (if any), remove the protective cap and connect directly to the outer luer connector to drain the gas;

3. medical personnel rotate and loosen the needle tip protection sleeve, pinch the catheter holder with one hand, turn the needle handle slightly from side to side with the other hand, and then reset it to prevent needle adhesion;

4. hold the needle holder flap so that the syringe blade is facing upward at an angle of 15-30 degrees, puncture the vein straight and feed the needle slowly;

5. carefully observe the return of blood at the lateral hole of the needle core, depress the angle after seeing the return of blood, continue to enter the needle for 2 mm, hold the catheter holder in the left hand and withdraw the steel core about 5 mm with the right hand;

6. Hold the needle holder and feed the steel needle core and catheter together all into the vessel, and withdraw the steel needle core. Do not re-insert the steel needle into the catheter to avoid damage to the catheter. Put the withdrawn steel needle into the special apparatus;

7. Adjust the infusion flow rate by applying a transparent dressing;

8. After the indwelling infusion is finished, the tube should be sealed.

Indwelling needles are left in the back of the hand:

(1) Hands with indwelling needles should not be subjected to strenuous exercise, e.g., you can read a book and not play ball;

(2) Hands with indwelling needles should not be immersed in water, and when washing hands, avoid the area covered by the indwelling needle patch;

(3) Put a sock on the hand with the indwelling needle after the infusion (turn the sock over when you put it on, because there are threads inside the sock) to prevent the child from tearing off the needle when playing.

Product scope of application:

This product is suitable for the collection of peripheral intravenous infusions and blood samples with a retention time of no more than 72 hours.