Xiamen Comwinning Imp.&Exp.Co.,Ltd
| Payment Terms | T/T, L/C |
| Supply Ability | 150 sets per month |
| Delivery Time | 30 days |
| Packaging Details | export package |
| Item | Building Construction Lift |
| Design | Modular |
| Material | cold roll steel plate |
| Production | Standardized production |
| Finishing | Painted and Galvanised |
| Feature | High Safety |
| Brand Name | KANGBO |
| Model Number | SC200/200(BD) |
| Certification | TUV |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Direct Start Up And Stop 46 M / Min Construction Hoist Elevator
Vertical Transportation 36M / Min 2000kg Construction Site Elevator
Double Cage 250M Rack Pinion Construction Hoist Elevator
Low Noise 3200 Kg Construction Material Lifting Hoist
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 150 sets per month |
| Delivery Time | 30 days | Packaging Details | export package |
| Item | Building Construction Lift | Design | Modular |
| Material | cold roll steel plate | Production | Standardized production |
| Finishing | Painted and Galvanised | Feature | High Safety |
| Brand Name | KANGBO | Model Number | SC200/200(BD) |
| Certification | TUV | Place of Origin | CHINA |
| High Light | Rack Pinion Construction Lift ，Rack Pinion Building Lift | ||
High Safety Guide Rail Building Construction Lift
Building Construction Lift Introduction
1. Guide rail system
The construction elevator is equipped with the guide rail system made of 20# steel that is 4.5mm thick.
2. Gear rack
The gear rack is made of 55# steel and its service life is about 10 years.
3. Power system
Same as the engine of a car, the elevating conveyor is the core part of an elevator. The housing is made of 104# GB aluminum to
avoid any cracking. The 94# tin bronze is used to produce the worm gear. Other parts like the worm and fluted disc are made of 38#
chrome green aluminum. Except the bronze worm gear, all other parts aforementioned should experience heat treatment, blackening
and nitride coating. The operating time of the construction hoist is 10 to 15 years.
4. Safety devices
a. Fall arrest device
b. Loading capacity limiter
c. Limit switch
d. Upper limit protection device
e. Lower limit protection device
f. Door limit protection device
g. Escaping window limit protection device
h. Bell warning device
i. Emergency stop protection device
j. Buffering protection device
k. Motor overload protector
l. Transformer short-circuit protection device
m. Phase sequence protection device
5. Cable
We employ genuine GB cable that is guaranteed on quality.
6. Electrical system
The main devices in the electrical system are all imported.
a. The fan installed helps dissipate the heat effectively.
b. With a time delay relay, the construction lift can stop smoothly and steadily.
c. Alarm bell informs users of the starting of the fall arrest device.
d. Failure warning light will send light signals when there is a failure of the motor or electrical system.
7. Protection fence
The outside fence and fence gate are built with plastic-sprayed perforated plate which is one time more expensive than the
expanded plate mesh.
8. Additional scaling ladder
For each construction hoist, two scaling ladders are added to the drive system to ensure more convenient and flexible
installation.
9. Frequency conversion system (optional)
a. Floor selecting function
b. Precise distance for stopping at a layer
c. Protection of gears and racks
d. Gear shifts can be settled to control the lifting speed
e. The passenger hoist can start and stop stably at constant speed with little noise.
Building Construction Lift Specification
| Technical Data | KP-B05, KP-B06 Building Construction Lift |
| Payload capacity | 2,000 kg |
| Lifting speed | 0–36 m/min. |
| Max. lifting height | 250/400 m* |
| Cage width (internal) | 1.5 m |
| Cage length (internal) | 3.2 m |
| Cage height (internal) | 2.35 m |
| Motor control | FC control |
| Engine power | 2x11 kw |
| Gearbox | Helical reducer |
| Safety device type | centrifugal brake |
| Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
| Type of mast | square column 650*650 mm with bolted rack |
| Length mast section | 1.508 m |
| Rack module | 8 |
| * Increased lifting height on request. 250 m with step-up transformer only. 400 m with step-up/step-down transformer. | |
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1997
Total Annual:
55,000,000-65,000,000
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Xiamen KANGBO Machinery Group Co., Ltd., has been specializing in manufacturing Construction Hoists and Hoist Spare Parts for more than 20 years. Products: Construction Hoists and Spare Parts Capacity: Annual sales quantity is more than 3500 units Construction Hoist. With experianced me... Xiamen KANGBO Machinery Group Co., Ltd., has been specializing in manufacturing Construction Hoists and Hoist Spare Parts for more than 20 years. Products: Construction Hoists and Spare Parts Capacity: Annual sales quantity is more than 3500 units Construction Hoist. With experianced me...
Get in touch with us
Leave a Message, we will call you back quickly!