Kronz (guangzhou) Electronics Co., Ltd.
| Payment Terms | T/T, Western Union, MoneyGram |
| Supply Ability | 10000 pieces per month |
| Delivery Time | 5-8 working days |
| Packaging Details | Paper box packing |
| Description | RFID Gateway Module |
| Use | Industrial communications |
| Output | 18-30VDC |
| Operating Temperature | -30℃~+70℃ |
| Interface | RS-485 |
| Application | Industrial Communication |
| Current consumption | <80mA@24V |
| RFID Connector | M12 5Pin A coded Female |
| Model Number | KRG60-EC |
| Place of Origin | Guangdong, China |
| Brand Name | KRONZ |
| Certification | CE |
View Detail Information
Explore similar products
13.56MHz RFID Recognition System Read Write Head With RS-485 LED Display And M30
RFID Reader Head 0-70mm Read Write Range With RS-232 LED Display IP67 M30X1.5
Modbus TCP RFID Recognition System Gateway Module 18-30VDC 5Pin M12 A coded Male
RFID Reader Head 9-30VDC Read Write 0-40mm Head with RS-232 M18x1 CE
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram | Supply Ability | 10000 pieces per month |
| Delivery Time | 5-8 working days | Packaging Details | Paper box packing |
| Description | RFID Gateway Module | Use | Industrial communications |
| Output | 18-30VDC | Operating Temperature | -30℃~+70℃ |
| Interface | RS-485 | Application | Industrial Communication |
| Current consumption | <80mA@24V | RFID Connector | M12 5Pin A coded Female |
| Model Number | KRG60-EC | Place of Origin | Guangdong, China |
| Brand Name | KRONZ | Certification | CE |
| High Light | RFID Gateway Module ，RFID Gateway Module EtherCat ，Industrial Communication RFID Module 30V | ||
RFID Gateway Module EtherCat Industrial Communication 18-30V M12 Connector
1. Advantages:
1>. High protection level and strong corrosion resistance, can be used in harsh industrial environments
2>. Supports mainstream PLCs , provides mature PLC function blocks/routines, and supports industrial communications such as TCP/IP, Modbus TCP , PROFINET, EtherCat and Ethernet/IP
3>. High stability and reliability, 7*24h operation
| Characteristics | |
| Design | ① Dual network ports, support cascading |
| ② Supports 6 RFID ports | |
| Area of application | Applications in harsh industrial environments require multiple RFID and need to be connected to the bus network. |
2. Electrical interface
LK1/LK2 Ethernet interface using a 4Pin-M12-DCODED-Female connector, the pin assignment is shown below.
| Connector | Pin | Assignment | Description |
| 1 | TD+ | Tranceive Data+ |
| 2 | RD+ | Receive Data+ | |
| 3 | TD- | Tranceive Data- | |
| 4 | RD- | Receive Data- |
Pi/Po Power supply interface using a 5Pin-M12-LCODED-Male/Female connector, the pin assignment is shown below.
| Connector(Male) | Pin | Assignment | Description |
| 1 | US (+24V) | System power supply positive |
| 2 | GNDL (0V) | Load power supply negative | |
| 3 | GNDS (0V) | System power supply negative | |
| 4 | UL (+24V) | Load power supply positive | |
| 5 | PE | Protective earth |
| Connector(Male) | Pin | Assignment | Description |
| 1 | US (+24V) | System power supply positive |
| 2 | GNDL (0V) | Load power supply negative | |
| 3 | GNDS (0V) | System power supply negative | |
| 4 | UL (+24V) | Load power supply positive | |
| 5 | PE | Protective earth |
| Connector | Pin | Assignment | Description |
| 1 | US (+24V) | System power supply positive |
| 2 | A (RS485) | RS485 A | |
| 3 | GNDS (0V) | System power supply negative | |
| 4 | B (RS485) | RS485 A | |
| 5 | NC | Not connected |
| System status | |||
| NOTICE: SYS is the system status LED, US is the voltage status LED, and CS is the key chip status LED. | |||
| Name | Color | State | Description |
| SYS | Blue Red | Off | The GM is power off. |
| Blue LED on | The GM has completed initialization and is operating normally. | ||
| Blue LED flashing | The GM is running at default settings. | ||
| Red LED on | The GM is in BOOT mode. | ||
| Red LED flashing | Software failure. | ||
| US | Blue Red | Off | Undefined (not used). |
| Blue LED on | All RFID port voltages are normal. | ||
| Blue LED flashing | Undefined (not used). | ||
| Red LED on | There is an abnormal voltage on a single RFID port. | ||
| Red LED flashing | There are abnormal voltages on multiple RFID ports. | ||
| CS | Blue Red | Off | Undefined (not used). |
| Blue LED on | The key chip is working normally. | ||
| Blue LED flashing | The key chip temperature is too high. | ||
| Red LED on | The key chip communication abnormality. | ||
| Red LED flashing | The key chip initialization abnormality. | ||
| RFID Status | |||
| NOTICE: RFID has 6 ports ( RF1~RF6 ), and the RFID status is indicated by two LEDs 0/1 . 0 is equivalent to RUN , the running status indicator ; 1 is equivalent to ERR, the error status indicator. | |||
| Name | Color | State | Description |
| 0 (RUN) | Blue | Off | Not enabled. |
| On | Communication with the reader is normal. | ||
| Flashing | Tags exist in the recognition range. | ||
| 1 (ERR) | Red | Off | No abnormality |
| On | The voltage is too low. | ||
| Flashing | Communication abnormality with the reader. | ||
| Bus status:EtherCAT | |||
| NOTICE: BS0 is equivalent to R UN, the running status indicator; BS1 is equivalent to ERR, the error status indicator. | |||
| Name | Color | State | Description |
| BS0 | Blue | Off | INIT: The device is in INIT state. |
| Flashing (2.5Hz) | PRE-OPERATIONAL: The device is in PRE-OPERATIONAL state. | ||
| Single flash | SAFE-OPERATIONAL: The device is in SAFE-OPERATIONAL state. | ||
| On | OPERATIONAL: The device is in the OPERATIONAL state. | ||
| BS1 | Red | Off | No error: The EtherCAT communication of the device is in working condition. |
| Flashing (2.5Hz) | Invalid configuration: General Configuration Error Possible reason: State change commanded by master is impossible due to register or object settings. | ||
| Single flash | Local error: Slave device application has changed the EtherCAT state autonomously.Possible reason 1: A host watchdog timeout has occurred. Possible reason 2: Synchronization Error, device enters Safe Operational automatically. | ||
| Double flash | Application watchdog timeout: An application watchdog timeout has occurred. Possible reason: Sync Manager Watchdog timeout. | ||
| LK1/2(0) | Blue | Off | The device has no link to the Ethernet. |
| On | Link: The device is linked to the Ethernet, but does not send/receive Ethernet frames. | ||
| Flashing | Activity: The device is linked to the Ethernet and sends/receives Ethernet frames. | ||
| LK1/2(1) | Blue | Off | Undefined(not used) |
Technical Data
| Electrical data | |
| Supply voltage | 18-30VDC |
| Current consumption | ＜ 80mA@24V |
| Power protection | Overcurrent protection, reverse connection protection, surge protection, ESD protection, FFT protection |
| Power Connector | 5Pin-M12-LCODED- Male (PI) 5Pin-M12-LCODED-female(PO) |
| Bus | EtherCAT |
| Communication | Dual network ports with integrated switching function, compliant with IEE802.3 standard, 10 / 100M adaptive |
| Bus Transmission distance | Cat 5e and above shielded twisted pair,＜100m |
| Network Connector | 4Pin-M12-DCODED-M12-Female |
| RFID port number | 6 |
| RFID communication interface | RS-485 |
| RFID port Transmission distance | Shielded twisted pair, < 50m |
| RFID connector | 5Pin-M12-ACODED-Female |
| Permitted ambient conditions | |
| Operation temperature | -30℃~+70℃ |
| Storage temperature | -40℃~+85℃ |
| Degree of protection | IP67, according to EN 60529 |
| Shock resistance | 7M2, 500 m/s2, according to EN 60721-3-7 |
| Vibration resistance | 7M2, 200 m/s2, according to EN 60721-3-7 |
| Mechanical specifications | |
| Housing Material | Aluminum Alloy |
| Housing color | Black |
| Weight | About 400g |
| Dimensions | 167.92x62.92x31.90mm |
| Type of mounting | 4 X M6 screws, the length of the screw should be ≥ 20 mm |
| Grounding | 1 X M3 screws, Grounding ring inner diameter greater than 3 mm, outer diameter should be less than 8 mm. |
| Standards, specifications, approvals | |
| Proof of suitability | CE FCC RoHS WEEE |
Company Details
Business Type:
Manufacturer
Year Established:
2021
Total Annual:
5000000-6000000
Employee Number:
80~120
Ecer Certification：
Verified Supplier
Kronz is a manufacturing enterprise located in Zengcheng District, Guangzhou City. We focus on providing customers with high-efficiency industrial automation solutions and related industrial products. After many years of innovation and development, Kronz has complete product processing equipment and... Kronz is a manufacturing enterprise located in Zengcheng District, Guangzhou City. We focus on providing customers with high-efficiency industrial automation solutions and related industrial products. After many years of innovation and development, Kronz has complete product processing equipment and...
Get in touch with us
Leave a Message, we will call you back quickly!