High Performance Electric Concrete Pump 80m3 / H Capacity 6200kg Weight

Product Specification

Brief Introduction to High Performance Electric Concrete Pump 80m3 / H Capacity 6200kg Weight

 
The concrete pump is composed of pump body and delivery pipe. It is a kind of machinery that continuously transports concrete along the pipeline by using pressure. It is mainly used for house construction, bridge and tunnel construction.
 
The HBT80 with a maximum capacity of 80 cubic meters per hour, is equipped with a unique hopper and blade design to reduce material residues and facilitate cleaning.Suitable for various concrete formulations.Good maintainability, easy to repair and disassemble.

Parameters of High Performance Electric Concrete Pump 80m3 / H Capacity 6200kg Weight:
 

Features to High Performance Electric Concrete Pump 80m3 / H Capacity 6200kg Weight:

1. High efficient hydraulic system with new high-speed commutation mode, which makes the pump commutation efficiency increase by 12%.

2. Large displacement pumping system makes the suction efficiency increased by 6%, to meet the needs of a variety of working conditions.

3. Overall hydraulic reversing open system has the advantage of high cleanliness of hydraulic oil, low oil temperature and small impact on commutation.

4. Master cylinder seal adopts waterproof technology, which can effectively prevent water from entering the hydraulic system, to prevent hydraulic oil emulsification.

5. Advanced S tube valve enjoys the advantages of good sealing, while quick-wear parts are economic and durable, easy to replace.

6. Hydraulic and electrical main components use internationally renowned brands with high reliability.

The Working of High Performance Electric Concrete Pump 80m3 / H Capacity 6200kg Weight

The basic principle of working of all types of concrete pumps is the same. The pump operates on the basis that one piston draws liquid concrete from a hopper into a cylinder while the other piston pushes its concrete out into the discharge pipes, both the functions happening simultaneously. There is a valve that controls which cylinder opens to the concrete hopper and which one opens to the discharge pipes. The valve switches every time the pistons reach the end point, and the process goes on with the first cylinder now releasing the concrete and the second cylinder drawing fresh concrete from the hopper.

The piston concrete pump vehicle is to charge the ready mixed concrete into the cylinder through the hopper when the pistons are contracted, and to discharge when the pistons are expanded, like water guns. Charging and discharging operations are switched by the swing valve.

Warranty:

 
The warranty will be one year from the date of shipment. Any detected parts during this period caused by the quality of products will be replaced by seller free of cost (exclude wear and tear parts), improper operation and other manmade reasons are excluded.and engineers available to service machinery overseas.
 

More Details of High Performance Electric Concrete Pump 80m3 / H Capacity 6200kg Weight:

		1. Hydraulic system Double open hydraulic loops with 2 pumps.The reliability of the whole system is also much higher as well as the components' life is prolonged greatly. This is convenient for judgeing and removing trouble.
2. Electric control system Compared with domestic product, the electric control system is simplest, the element quantity is fewest and its reliability is the highest. Adopting proximity switch in hydraulic cylinder can realize changing direction with non-touch, which ensures that the direction can be changed reliably.
		3. Mechanical system The design of hopper and S valve and so on adopt Ｉ－DEAS software to caculate, the hopper and S valve have good rigidity to avoid the phenomenon of hopper distortion and S valve breakage.
4. Cooling system The radiator equipment makes the working oil temperature of hydraulic system below 70℃ and makes the machine in normal status.

Our Services

 
1. Well-trained and experienced staff to answer all your inquiries in fluent English and Russia.
2. We will send our professional engineers to you country and help install the pump , train your worker to operate the pump.
3. OEM & ODM is welcome. OEM brand is available.
4. If you have any idea or demand, we can provide the customization service.
5. Protection of your martket area, ideas of design and all your private information.
6. We will supply the spare parts to insure the quality of our pump.
7. Your inquiry will be replied within 24 hours.
8. Provide following up after-sales services. We will dispatch our serviceman to solve the problem for you, if you have questions about our pump.