Jiangsu Co-effort Mechanical&Electrical Technology Co., Ltd
| Payment Terms | T/T |
| Supply Ability | 10 sets/month |
| Delivery Time | 75 working days |
| Packaging Details | Plastic Film and Wooden Case |
| Machine Name | Roll Forming Machine |
| Usage | Ball Bearing Drawer Slide Rail |
| Forming Speed | 12~15m/min |
| Roller Material | Cr12 |
| Shaft Material | 40Cr |
| Product Material | Stainless Steel |
| Roller Station | 12~16 Stations |
| Tolerance | + - 1.5mm |
| Hardness | HRC58-62 |
| Driven Way | Gearbox or Chain driven |
| Model | 35mm, 30mm, 27mm, 45mm |
| Type | 3 Fold |
| Brand Name | Co-effort |
| Model Number | GD160 |
| Certification | CO,CE,FORM A, FORM E |
| Place of Origin | China |
View Detail Information
Explore similar products
Stainless Steel Ball Bearing Drawer Slide Rail Roll Forming Machine
Stainless Steel Ball Bearing Table Drawer Slide Rail Roll Forming Machine
tainless Steel Ball Bearing Drawer Slide Rail Track Roll Forming Machine
Heavy Duty Ball Bearing Drawer Slide Rail Roll Forming Machine
Product Specification
| Payment Terms | T/T | Supply Ability | 10 sets/month |
| Delivery Time | 75 working days | Packaging Details | Plastic Film and Wooden Case |
| Machine Name | Roll Forming Machine | Usage | Ball Bearing Drawer Slide Rail |
| Forming Speed | 12~15m/min | Roller Material | Cr12 |
| Shaft Material | 40Cr | Product Material | Stainless Steel |
| Roller Station | 12~16 Stations | Tolerance | + - 1.5mm |
| Hardness | HRC58-62 | Driven Way | Gearbox or Chain driven |
| Model | 35mm, 30mm, 27mm, 45mm | Type | 3 Fold |
| Brand Name | Co-effort | Model Number | GD160 |
| Certification | CO,CE,FORM A, FORM E | Place of Origin | China |
| High Light | light gauge steel framing machines ，stud and track roll forming machine | ||
27mm Wide Ball Bearing Drawer Slide Rail Roll Forming Machine
Characteristics of Drawer Slide Rail Roll Forming Machine
1. Frame: the main beam is made of national standard section steel, reinforced in the middle, welded as a whole, and the installation surface is processed by stress relief and gantry milling; the welding material is high-grade flux cored gas shielded welding wire (only one in the same industry at present), and the structural strength and other mechanical properties of the frame meet the standards of marine components.
2. Archway: the archway is made of ball milled cast iron by integral casting and finish machining, instead of gray cast iron casting.
3. Number of archways: about 16 groups (including modeling and renovation).
4. Forming roll: GCr15 bearing steel forging, salt bath furnace quenching, hardness up to HRC58-62 °.
5. Shaft: material 40Cr, diameter £ 95mm, tempered hb250-280, fine turning.
6. Main motor and reducer: main motor 55.0kw, AC motor; reducer k157 (or similar)
7. Transmission mode: motor + reducer + gear distribution box.
8. Gearbox model: gy200 (according to national standard)
9. Rolling speed: 0-12m / min (adjustable)
10. Structural parts and standard parts shall conform to national standards. Harbin brand is selected for bearing, and famous brands at home and abroad are used for other standard parts.
11. Appearance treatment: the welding parts shall be polished, degreased and puttied before spraying the primer, and the top coat shall be sprayed with two times of high-grade polyurethane paint, with fine appearance treatment and beautiful atmosphere.
Main Components of Roll Forming Machine
| 3 tons passive de-coiler | 1 set |
| roll forming machine | 1 set |
| Feeding and leveling device | 1 set |
| Hydraulic cutting device | 1 unit |
| Hydraulic station | 1 unit |
| PLC control box | 1 unit |
| Safety cover | 1 unit |
| Out table | 2 units |
Production Process of Roll Forming Machine
Material Coil – De-coiling – Feeding – Roll Forming – Straightening – Hydraulic Punching & Cutting-Off – Finished Slide
Technical Parameters of Drawer Slide Rail Roll Forming Machine
| 1. | Power Requirement
| Type | 380v/3ph/50hz | |
| Main Motor power | 5.5kw | |||
| Cutter power | 4kw+1.5kw | |||
| 2. | Forming speed(m/min) | 40-45m/min max | Not include the time of cutting | |
| 3. | Forming stations | 12stations | ||
| 5. | Material of rollers | CR12 | ||
| 6. | Thickness of structure | 30mm | ||
| 7 | Forming shaft diameter(mm) | 50 | ||
| 8 | Drive | Gear box | ||
| 9 | Type of cutting | Hydraulic cutting | ||
| 10. | Control system | PLC xinjie | ||
| 11. | Install dimension(depend on the final design) | 4.8m×0.6m×1.2m | Without panel length | |
| 12. | Total weight (Approx) | 2.3T | Depend on final design | |
| 13. | Screen | Text screen /touch screen | ||
| NO | Name | Unit | Qty | |
| 1 | Man-made decoiler | set | 2 |
|
| 2 | Feeding Table | set | 1 | |
| 3. | Forming Rollers | set | 1 |
|
| 4. | Hydraulic cutting with hole punching | set | 1 |
|
| 5. | Profile Discharger | set | 1 |
|
| 6. | Electric Control system | set | 1 |
Brake down and so on Power supplier 380V 50Hz 3phase |
| ITEM | Description | Quantity | Function | Capacity | Working flow | Weight(KG) | Diamension(MM) |
| 1 | Roll forming Machine(12 steps) | 2 sets | One set if for inner rail, Another set is for outer rail. | 6m/min | Decoiler-forming-hole punching&cutting-run out table | 4000 | 5400*820*950mm |
| 2 | Roll forming Machine(16 steps) | 1 set | For making middle rail. | 6m/min | Decoiler-forming-hole punching&cutting-run out table | 4000 | 6200*820*950mm |
| Punching & Cutting Moulds | 3 sets | Installed on those three roll forming machines | For punching hole and cutting rail of roll forming machine | ||||
| 3 | Automatic Assembly Machine | 1 set | For assembling the beads on the slot, then install the slot on the middle rail | 20pcs/min | 600 | 2100*1100*1500 | |
| 4 | 40T Power Press machine for making Bead slot(including the Mould) | 1 | To make the bead slot, which will punch the bead slot with mould | Material feeder- punching(mould)-control box |
Ball Bearing Drawer Slide Rail Roll Forming Machine Photos
Company Details
Business Type:
Manufacturer
Year Established:
2017
Total Annual:
800000-1500000
Employee Number:
20~100
Ecer Certification：
Active Member
Jiangsu Co-effort Mechanical & Electrical Technology Co., Ltd. was founded in 2017, we mainly committed to the development and production of cold roll forming machines. Since we established, we always been based on the concept of "quality-oriented-technological innovation". From the pe... Jiangsu Co-effort Mechanical & Electrical Technology Co., Ltd. was founded in 2017, we mainly committed to the development and production of cold roll forming machines. Since we established, we always been based on the concept of "quality-oriented-technological innovation". From the pe...
Get in touch with us
Leave a Message, we will call you back quickly!