T70B T89B Elevator Guide Rail Metal Process Production Conveyor Line

Product Specification

Automatic High Precision Metal Process Production Conveyor Line for T70B T89B Elevator Guide Rail

Description of Conveyor Line

1. The high-precision elevator guide rail processing automatic production line is a high-precision automatic production line independently developed by our company. Among them, there is one vertical horizontal compound milling machine for the left end face and the left large back face of the elevator guide rail, one horizontal CNC machining for the male tenon of the elevator guide rail, one vertical CNC drilling machine for the movable column at the left end of the elevator guide rail, one vertical CNC spot facer machining compound machine for the movable column at the left end, one vertical horizontal compound milling machine for the right end face and one right large back face of the elevator guide rail, A compound machine tool for horizontal NC machining of the mortise and tenon of the elevator guide rail, Vertical NC drilling machining of the moving column at the right end of the elevator guide rail, Vertical NC dimpling machining of the moving column at the right end, and a set of logistics conveying device for the whole line. A total of four machine tools and one set of logistics conveying device.

Semi-automatic metal processing production line

1. Applicable range of products: T45 T50A T70A T70B T75-3/B,T78,T82,T89/B,T90/B,T114/B,T127-1/B,T127-2/B,T140-1/B,Length: 4m,5m.

2. Produce Time: based on operator proficiency level.

3. Transverse conveying system: flexible transport with double row top roller chain. It is composed of frame, cycloidal pin wheel reducer, conveyor chain support, main drive shaft and tension device. The conveying method can realize multiple gathering and single processing of the guide rails in each processing position, thus shortening the transversal conveying time, making each processing section closely connected, logistics conveyor material rack should be firm and reliable, and no shaking in the normal working process. Reducing labor intensity and improve work efficiency.

4. Guide rail sizing mechanism: milling material rack there are two pneumatic lifting frame, pneumatic lifting, artificial control, 4 meter and 5 meter manual switching, positioning adjustment amount: 50mm, pedal pneumatic control during operation.

Conveying and Control

1. The discharge area is provided with a discharge rack with a ball chain for lifting.

2. The drive of the rack raceway is driven by a chain with a chain pitch of 15.875mm.

3. The longitudinal transmission speed of the whole line is about 12~15m/min.

4. The main material of the longitudinal (lifting) conveyor adopts rectangular pipe and C-shaped steel, and the drive chain is built-in.

5. The main material of the transverse conveyor is a rectangular tube. The conveyor chain is mainly a double-row overhead ball chain with a pitch of 25.4mm.

6. The whole line electrical control is PLC control mode, and each action command and signal transmission should be accurate and reliable. Paint drying and oiling film line electrical equipment matching: PLC adopts Japan Mitsubishi or Taiwan Delta brand, touch screen adopts Weilun brand, photoelectric control adopts Zhejiang Feiling brand, contactor and intermediate relay adopt Schneider brand, open use Zhejiang Deli Western brand, the cylinder uses Zhejiang Leerda brand. Automatic hair straightening machine electrical equipment selection: PLC adopts Japan Mitsubishi brand, touch screen adopts Weilun brand, photoelectric control adopts Omron brand, contactor and intermediate relay adopts Schneider brand, open depot adopts Zhejiang DELIXI brand, industrial computer adopts EVOC brand The cylinder adopts Zhejiang CHLED brand.

7. Automatic fine-tuning machine electrical equipment selection: PLC adopts Taiwan's Delta brand, touch screen adopts Taiwan's Delta brand, photoelectric control adopts Omron brand, contactor and intermediate relay adopt Schneider brand, open-air Zhejiang DELIXI brand, industrial computer adopts research Xiang brand, the cylinder uses Zhejiang CHLED brand.

8. Motors, reducers, electrical, hardware, etc. use national high-quality standard parts, with versatility, interchangeability, stable and reliable performance, bearings should use dust-proof bearings.

9. The line of the control cabinet to the components of the equipment is provided by Buyer; the main pneumatic pipeline (the location of the galvanized pipe needs to be arranged) is provided by Seller, and the line from the power bus to the control cabinet is provided by Seller.

10. When the equipment leaves the factory, it should provide the main purchased parts, wearing parts, specifications list and instruction manual, electrical schematic, hydraulic oil circuit diagram, certificate of conformity and delivery list.