Convenient Single Pin Tip RF Plasma Generator Unit For Total Knee Arthroplasty

Product Specification

Product Description:

• Safety: The Radio Wave Plasma Generator technology ensures that the current does not flow through the human body, making it safer than traditional surgical methods like electric knife or laser. The working surface temperature is only between 40 ° C to 70 ° C, and the surrounding tissue is less thermally damaged. The cutting and ablation depth can be controlled to ≤50μm when used in the recommended energy range.
• Minimally Invasive: This RF Plasma Generator Unit generates less heat, reduces tissue thermal damage, reduces wound healing time, and lowers the chances of wound bleeding and scar formation compared to traditional surgical methods like electric knife or laser.
• High Efficiency: The patient's pain during surgery is significantly reduced, and the incidence of postoperative inflammation is also significantly reduced. The doctor can stop bleeding while cutting and does not need other hemostasis tools.

• Foot switch: The product comes with a foot switch for easy operation.
• Imported from Europe: The product is imported from Europe, ensuring high quality and reliability.
• Finger switch (optional): The product also has an optional finger switch.
• Single use: The RF Plasma Generator Unit is designed for single use only.
• No carbonization: The product generates no carbonization, making it safer for surgical use.
• Single pin tip: The single pin tip is convenient for ablation and hemostasis of the surrounding tissue in wrist and hip joint surgeries.
• Total anesthesia: The product is designed to provide total anesthesia during surgery.

• Widely used for knee, shoulder, hip, wrist, ankle, and elbow joint surgeries.
• Resection, lysis, plasty, debridement, and ablation can be applied on meniscus.
• Complete or partial resection of meniscus, meniscus finishing, and repairing.
• Ligament release or tightening.
• Hip / wrist Arthroscopy.

The Disposable Radio Frequency Plasma Generator Probe for TURP is a cutting-edge product that offers a safe, minimally invasive, and highly efficient surgical solution for joint surgeries. The product is designed to provide total anesthesia during surgeries and generate no carbonization, making it safer for surgical use. The single pin tip is convenient for ablation and hemostasis of the surrounding tissue in wrist and hip joint surgeries. The product is imported from Europe, ensuring high quality and reliability.

Features:

• Product Name: Radio Frequency Plasma Generator
• Product Category: RF Plasma Generator Unit, Electromagnetic Frequency Plasma Generator, RF Plasma Discharge Device
• Advantages:
  • Safety: Compared with traditional surgical methods (such as: electric knife, laser), the current does not flow through the human body, the working surface temperature is only 40 ° C to 70 ° C, and the surrounding tissue is less thermally damaged. When used in the recommended energy range, the cutting and ablation depth is controlled to ≤50μm.
  • Minimally Invasive: Compared with traditional surgical methods (such as electric knife, laser), it has less heat, reduces tissue thermal damage, reduces wound healing time, reduces wound bleeding and scar formation.
  • High Efficiency: Compared with traditional surgical methods (such as: electric knife, laser), the patient's pain during surgery is significantly reduced, and the incidence of postoperative inflammation is significantly reduced. During the surgery, the doctor stops bleeding while cutting, and does not need other hemostasis tools.
• Working Principle: The plasma technology of Better Health is the plasma energy generated by stimulating NaC in physiological saline with a 10DKHz square wave. The high-speed charged particles in the plasma can break the molecular bonds of the human body, causing proteins and other tissues to decompose and vaporize into low molecular weight gases such as H2,02,CO2,N2,and methane. Under a stable electric field of 100KHz square wave, particles will achieve a longer acceleration time, ultimately forming speed charged particles with kinetic energy, which can break molecular bonds and cause minimal damage to surrounding tissues. The treatment temperature is low, and the processes of cutting, ablation, and hemostasis are completed within 40-70℃.
• Indications:
  • Widely used for knee, shoulder, hip, wrist, ankle and elbow joints.
  • Resection, lysis, plasty, debridement and ablation can be applied on meniscus.
  • Complete or partial resection of meniscus, meniscus finishing and repairing. Ligament release or tightening.
  • Hip / wrist Arthroscopy.
• Features:
  • Foot switch.
  • Imported from Europe.
  • Finger switch is optional.
  • Single use.
  • No carbonization.
  • The single pin tip is convenient for ablation and hemostasis of the surrounding tissue in wrist and hip joint.
  • Total anesthesia.

Technical Parameters:

Applications:

The RF Plasma Generator Unit is equipped with a foot switch and is imported from Europe. A finger switch is optional. The product is single-use, no carbonization and the single pin tip is convenient for ablation and hemostasis of the surrounding tissue in wrist and hip joint with total anesthesia. The product is mainly indicated for knee, shoulder, hip, wrist, ankle and elbow joints. It can be used for resection, lysis, plasty, debridement and ablation on meniscus and for complete or partial resection of meniscus, meniscus finishing and repairing. Ligament release or tightening and hip/wrist arthroscopy can also be performed using this product.

The Disposable Radio Frequency Plasma Generator Probe for TURP has a 90° probe angle with a quantity of 4 pins. The article number is GK407 and the length of the probe is 180mm with a diameter of 4.021mm. The Radio Frequency Plasma Reactor provides a safe and minimally invasive surgical procedure as compared to traditional surgical methods like electric knives and lasers. The current does not flow through the human body and the working surface temperature is only 40 ° C to 70 ° C, which results in less thermally damaged surrounding tissue. The cutting and ablation depth is controlled to ≤50μm. The product is highly efficient and reduces the patient's pain during surgery while reducing the incidence of postoperative inflammation. The doctor can stop bleeding while cutting and does not need other hemostasis tools.

Support and Services:

The Radio Frequency Plasma Generator is a high-performance product designed to provide reliable and efficient plasma generation for various industrial and scientific applications. Our team of technical support and service experts are dedicated to ensuring that our customers receive the best possible experience with our products. Here are some of the services we offer:

- Installation support and guidance

- Training and education on product usage and maintenance

- Troubleshooting and technical assistance

- Repair and maintenance services

- Upgrades and customization options

Our team is committed to providing prompt and effective solutions to any issues or concerns that may arise. We strive to deliver the highest level of customer satisfaction and ensure that our customers get the most out of their Radio Frequency Plasma Generator.

Packing and Shipping:

- The Radio Frequency Plasma Generator product will be packaged in a sturdy cardboard box to ensure the product is protected from damage during shipping.

- The product will be wrapped in bubble wrap and sealed in a plastic bag for extra protection during transit.

- A user manual and warranty information will be included in the package for the customer's convenience.

- The packaging will be labeled with the product name, model number, and barcode for easy identification.

Product Shipping:

- The Radio Frequency Plasma Generator product will be shipped via a reputable shipping company such as UPS, FedEx, or DHL.

- Customers will receive a tracking number to monitor their package's journey and estimated delivery date.

- Shipping fees will be calculated based on the customer's location and the weight of the package.

- Shipping times may vary depending on the customer's location and the shipping company's policies.

FAQ:

Q: What is the brand name of the Radio Frequency Plasma Generator?

A: The brand name of the generator is Better Health.

Q: What is the model number of the Radio Frequency Plasma Generator?

A: The model number of the generator is pk-100.

Q: What certifications does the Radio Frequency Plasma Generator have?

A: The generator is CE and ISO certified.

Q: Where is the Radio Frequency Plasma Generator made?

A: The generator is made in China.

Q: What is the minimum order quantity for the Radio Frequency Plasma Generator?

A: The minimum order quantity for the generator is 1 set.

Q: What is the price of the Radio Frequency Plasma Generator?

A: The price of the generator is negotiable. Please contact us for more information.

Q: What are the payment terms for the Radio Frequency Plasma Generator?

A: The payment terms for the generator include L/C, D/A, T/T, and Western Union.

Q: What is the delivery time for the Radio Frequency Plasma Generator?

A: The delivery time for the generator is 5-8 days.

Q: How is the Radio Frequency Plasma Generator packaged?

A: The generator is packaged in a paper carton.