Long Service Life Cnc Wire Cut Machine , 2000 Kg Small Wire Edm Machine

Product Specification

molybdenum wire cut machine FR500G New Design

Cnc Wire Cut Machine Main Features

1) Machining complex shapes that would otherwise be difficult to produce with conventional cutting tools.
2) Machining extremely hard material to very close tolerances.
3) Machining very small workpieces where conventional cutting tools may damage the part from excess cutting tool pressure.
4) There is no direct contact between tool and workpiece. Therefore delicate sections and weak materials can be machined without any distortion.
5) A good surface finish can be obtained.

Cnc Wire Cut Machine Parameters

Cnc Wire Cut Machine Standard Configuration:

1) Window XP System with Auto-CAD software control System.
2) PANASONIC converter ( Japan Panasonic )
3) "C" Structure HTK Casting Machine Body ( Japan HTK )
4) Standard DRO and Z axis motorized drive up and down.
5) Hiwin brand linear guide way install on XYZUV 5 axis ( P lever )
6) Hiwin brand ball screw install on XYZUV 5 axis ( C3 lever )
7) Automatic center lubrication system. (Not manual )

Cooperate Suppliers:

Linear guide way and ball screw supplier (HINWIN Taiwan)
Bearing supplier (NSK Japan )
Motor, Driver and Electric accessories supplier ( SIEMENS German)
Electric accessories supplier ( NCC Japan )
Transducer (converter) ( PANASONIC Japan)
Servo driver supplier ( YASKAWA Japan )
Handle Remote supplier (EUCHNER German )
Industrial control system supplier (PHILIPS Europe)

Cnc Wire Cut Machine Featurers:

1) Parameter is not required to put in, Artificial Intelligence works out perfect parameter 
immediately after putting in cutting thickness and wire diameter, Different accuracy based on different workers with different experience will be solved.  

2) Roughness: Ra ≤0.8um
3) 3 Time Cutting thickness : ≥200mm
4) Max Machining Speed: 200mm2/min
 

Cnc Wire Cut Machine Introduction

Considering the main problems existing in the old type Fast Speed wire cut machine such as low cutting precision, bad surface finishing and slow cutting speed, while the brass wire cut machine is much more expensive and difficult to learn, we develop the second generation Middle Speed Wire Cutting machine based on the technology from Brass wire cut machine, deeply improves the cutting precision, surface finishing (Ra≤0.8um), cutting speed to make the cutting life and technology almost same as brass wire cut machine. But the machine's purchase cost is much lower than brass wire cut machine, the operator who has a little experience of fast speed wire cut machine can use our machine immediately. Comprehensive efficiency is 2 or 3 time as fast speed wire cut machine.

We adopt 6 sets high lever linear guide way on the traveling system including X,Y axis and other running accessories, X,Y axis adopts 2 sets high level ball screw. Wire Swing system: the first company adopt linear guide way, make the travel move smoothly without any obstruction, it make sure the swing without any wear, solve the big obstruction, big wear, etc problem from the V shape guide way.Tape or Angle part: UV axis tape unit has got national patent, patent number:2L2008200332261. Perfect design high lever tape unit, make high accuracy for moving and tape cutting. Wire Tension System: National patent number: 2L200820000226.7. Adopt double direction wire tension system, keep the wire tension with same strength during the working time, which can protect the wire and reduce the wire broken possibility.