Transparent Lamp Mould Lighting Prototyping High Polish Long Lifespan

Product Specification

High polish on transparent lighting prototyping products (Lighting prototyping)

Quick Detail:

Automotive lighting prototyping is becoming more and more important in automotive development. And now due to the pursuit of high quality life, the quality standard toward the automotive parts is getting higher and higher now. In this case, the improvement for the current machining ways toward the automotive parts especially the automotive lighting products such as the headlamps and light guides is getting more technology necessary. For example the lighting prototyping parts of Audi, BMW, Benz are already pursuing the high transparent by applying the diamond tool to machine the optical teeth, making the automotive lighting manufacturers have to improve such technology and spend more cost in diamond tools development.

Description:

1.  CNC clear lighting prototypes

Rapid prototyping of automotive clear lighting prototypes is the quick turnaround by using CNC machines to machine transparent PMMA or polycarbonate material. The slower the tool goes on while machining, the better machine surface the part will be. For clear light guides, the last smallest tool on the optical teeth is normally the R0.15 mm which will take many hours to finish the last step. As the PMMA material is fragile and easy to break, thus will need to pay a lot of attention when proceed the machining.

As clear lighting parts are transparent, thus the most important thing is the cosmetic should be perfect. However, when the parts are over the length of CNC platform working stage, the parts will need to split, in this case, the gluing technology and polishing toward the bonding mark is super important. The best is to apply the splitting on the step areas so that the bonding mark can be covered together with the step. Then together with the polishing process, it will make the bonding mark as smallest as possible to keep the original clear cosmetic without breaking the lighting routine as well.

2.  Vacuum casting clear lighting prototypes

The lighting industry now is in the progress of casting 2K parts in both black and clear material or red and clear material. To fulfill this, the first thing is the material must be the same otherwise different material will cause reaction with bubbles, then the whole casting part will be discard and need to remake, this will waste time and cause higher cost.

The masters of the 2K parts have to be in the same finish, the black lens need to paint as black first, the glue with the clear lens and make 2 silicone molds, one is the complete 2K part mold, one is the black lens mold, then we casting the black lens first, and then put the black casting lens into the silicone mold, and continue to casting the clear lens, after getting the complete 2K lens, apply mirror polish again to make the whole part in a good surface.

3.  Post finishing of lighting prototypes

3.1 The first is the mirror polish on clear lighting prototypes. Except optical teeth will not do any hand work polish, other clear surface will need to apply such process after finish CNC machining. To remove the tool marks we will need to use #400 and #600 sanding paper first, then to #1000 sanding paper and even #1500 to get a good surface, the polishing paste for PMMA is special and with this can remove the sanding paper marks, and after this the final part will be completed.

3.2 The second is the post treatment. Painting is the most comment finish with different colors, for example black matte, black glossy, red glossy or clear black and clear black, all of such finish are available and professional in us, even there are some clients would like to do painting in us even they make the raw parts by their own.

3.3 The third post finish that we would like to introduce is the plating. Most of the lighting reflectors will need to do plating to improve the lighting result. The plating finish that we apply on reflectors is rich and high quality.

Applications:

Automotive headlamps, light guides, automotive reflectors, automotive bezels

Specifications:

Competitive Advantage:

Low cost, quick lead time, high mirror polish surface, good quality post finish

Features:

Long lifespan

wear resistant

First Class Service

Stable performance

sturdy and durable

Services:

1. Do not worry, it will be best services.
2. Consult us immediately.
3. We will get back to you the first time.
4. It's my pleasure.

About Us

KAIAO is guided by American Foreign Expert, Bradlee A. Hughes, B.F.A., (Industrial Design); focusing efforts on the internationalization of Production Processes & Standards and on improving Foreign Business Relationships as a Technical Advisor to both staff and clients.

Our purpose is to assist product designers and engineers transform their Product Ideas into Production Realities; with over 100 Technical Sales Reps., PMs, & Production Specialists fully utilizing a 3000 sq. meter Production Plant of Advanced R&D Technologies...we can!