Custom Cnc Router End Mills Solid Carbide Milling Cutters Anti - Wear D2-20 MM

Product Specification

CNC End Mill Cutter High Quality Custom Wholesale Hss Concave Hole Cutter Milling Tools

overview 

           German cobalt collar K44, cobalt 12%, tungsten 88%, tungsten carbide sintered grain size of 0.4 m and cobalt collar K55, cobalt 10%, tungsten 90%, tungsten carbide sintered grain size of 0.2 m tungsten steel bar as raw materials.

       Scientific and strict groove design, edge Angle grinding process, so that the tool cutting edge strength, rigidity and anti-wear properties are combined.Large capacity groove through precision grinding and polishing treatment, smooth chip removal, not easy to produce chip tumor.

1) in the process of selecting knives for processing different materials and achieving different effects, it is suggested to use knives with short cutting edges as far as possible.Because the cutting edge is too long or the cutter body is too long, it will cause the whole movement and deviation during processing, which will lead to the damage of the cutting tool and the quality of the processed products.

2) be sure to use a suitable size of the jacket, because the wear is serious or not enough circle and the inner hole with a taper of the jacket, can not provide enough clamping force, resulting in vibration or twist off the handle and fly off.

3) when the tool holder is found to have uneven contact marks or grooves after the tool is clamped, it indicates that there is slippage or deformation of the inner hole of the fixture.Replace the jacket immediately.The tool handle and jacket must be fully tightened and firm to prevent the handle from breaking or causing accidents.

4) after the work to keep the tool clean, using standard industrial solvent to remove the dirt stuck on the tool.

5) do not take the risk of cutting tools and changing the type of cutting tools, because every grinding process requires professional grinding equipment and professional grinding skills.Otherwise, it is easy to cause knife edge fracture and accident.

  New blade shape, smooth and sharp surface, edge grinding with fine grinding wheel, no lack of corrosion on the coating, easy surface coating processing, cutting tool time to be extended.

According to customer's samples, drawings and instructions, to improve cooperation efficiency and accuracy.Please communicate clearly with our technical staff about the specific requirements of the customer. We will recommend

suitable products according to your specific situation and reduce the cost while ensuring the performance of the products.

F-ED-001 end mill Features:

1. Suitable for steels & cast iron (≤ 65 HRC)

2. High performance alcr series coating,high temperature resistance and high wear resistance.

3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.

End Mill Tool material composition:

1. Physical Properties:

a. Hardness greater than or equal to 92.6 HRA;

b. Density greater than or equal to 14.4g/cm³;

c. TRS greater than or equal to 3800 N/mm²;

d. Free of ETA phase condition;

e. No contamination by other materials;

f. Porosity = A02/ B00 / C00 ;

g. Uniform and consistent grain size. No grain size can be larger than specified.

h. Chromium carbide grain growth inhibitor only.

2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;

3. It's proposed cutting less than 65HRC;

Q:Are you Manufacture?

A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q:What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our  brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.