High Speed Left Hand Milling Cutter Adjustable Tapered Reamer Wear Resistance

Product Specification

Solid Carbide Reamers carbide reamer double flute straight router reamer

1.We not only supply all kinds of high quality solid carbide End Mills ,but also different types of Drill Bits,Reamers,Tool Holders,Cutter Heads,Saw Blades and Inserts.

2. We have 0.02mm-25mm different diameter and 38mm-150mm length Milling Cutters for your winner market.HRC45/55/60/65 ,1-6 flutes for you to choose.

3. OEM:Special Cutters Customized acceptable!Coated OEM also.We can produceaccording to your drawing,too.Or the hot deisgned recommend to you.

4. HS Code reference for you to control everything

5. Mixed size and types in one batch available.

【 tungsten steel material 】 German cobalt collar K44, cobalt 12%, tungsten 88%, tungsten carbide sintered grain size of 0.4 m and cobalt collar K55, cobalt 10%, tungsten 90%, tungsten carbide sintered grain size of 0.2 m tungsten steel bar as raw materials.

       Using multifunctional superfine grain tungsten steel material has better wear resistance and strength to belong to high hardness, high speed milling cutter, cutting edge passivation treatment not only makes the blade intensity increase tool life, also can make in the later than no passivation cutting tool machining more smooth and bright, the handle end chamfering processing, make the clamping more easily, also reduce the cutter wear and tear of the fixture,

    ALTIN high aluminum titanium coating process so as to improve the machining efficiency, can increase the tool life under the same cutting speed, unique chip groove shape, even in the groove and in cavity type processing can show the excellent performance,Sharp cutting edge and large screw Angle design effectively prevent the generation of chip deposition, the seismic design of the whole edge, can inhibit the chatter in the process of processing, improve the quality of the processing surface, in order to get the best cutting surface and tool life, please be sure to use high precision, high rigidity, good dynamic balance of the tool holder clamp.

End Mill Tool material composition:

1. Physical Properties:

a. Hardness greater than or equal to 92.6 HRA;

b. Density greater than or equal to 14.4g/cm³;

c. TRS greater than or equal to 3800 N/mm²;

d. Free of ETA phase condition;

e. No contamination by other materials;

f. Porosity = A02/ B00 / C00 ;

g. Uniform and consistent grain size. No grain size can be larger than specified.

h. Chromium carbide grain growth inhibitor only.

2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;

3. It's proposed cutting less than 65HRC;

Super raw material

1. Physical Properties:overview

a. Hardness greater than or equal to 92.6 HRA;

b. Density greater than or equal to 14.4g/cm³;

c. TRS greater than or equal to 3800 N/mm²;

d. Free of ETA phase condition;

e. No contamination by other materials;

f. Porosity = A02/ B00 / C00 ;

g. Uniform and consistent grain size. No grain size can be larger than specified.

h. Chromium carbide grain growth inhibitor only.

2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;

3. It's proposed cutting less than 65HRC;

Q:Are you Manufacture?

A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q:What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.