Aluminum Alloy Machining CNC Cutting Fluid Microemulsion Cutting Fluid

Product Specification

Feters-203 Microemulsion Cutting Fluid

Microemulsion cutting fluid,aluminum alloy machining,Long life and no odor,Strong versatility,Excellent lubricity

Product Description

This product is a water-soluble microemulsion cutting fluid with wide applicability. It has good lubricity, anti-foaming and anti-corrosion properties. It can effectively protect the cutting tools and reduce the number of cutting fluids to purchase. It is prepared using a variety of additives such as refined base oil, surfactants, anti-rust agents and additives through a special process, and does not contain harmful ingredients such as nitrites and phenols.

Applications

It is suitable for machining of carbon steel, alloy steel, stainless steel, aluminum alloy, copper and other metal materials. It can also process sensitive materials such as aviation aluminum. It can be used in stand-alone and central cooling systems.

Product Advantages

★Good lubricity and good processing effect, which can effectively extend the service life of the tool;

★Strong versatility, can effectively reduce the types of cutting fluid purchased;

★Excellent anti-corrosion performance;

★Good anti-foaming properties, conducive to workshop cleaning;

★Environmentally friendly product, does not contain nitrite, phenol and other harmful ingredients;

★Good stability, can be stored at room temperature for a long time without deterioration;

Typical Data

Note: The above are typical data and do not represent product indicators. Material safety data for the above products are available upon request. The above data can be used to obtain corresponding information on storage, safe handling and disposal. The above data has been tried to be as accurate as possible, but may change due to future recipe changes.

Recommended concentration ratio for use

The above usage concentrations are recommended usage concentrations and should be adjusted appropriately according to actual process requirements.

Precautions for use

• When using it for the first time, the water tank and pipes of the equipment must be cleaned before adding new liquid;
• Use clean tap water to prepare the solution. Do not let other chemicals contaminate the working fluid, otherwise it may affect the use effect of the product;
• Regularly skimming off the floating dirt on the surface of the cutting fluid and adding new fluid can help extend the service life of the working fluid and ensure the processing effect;
• When replenishing new working fluid, the water and original solution must be fully stirred evenly before adding to the water tank;
• Regularly use a refractometer to detect the concentration of the working fluid. If the concentration becomes low, the concentration of the fluid must be appropriately increased before adding it to increase the concentration of the original working fluid;
• Do not add water or original solution directly into the working fluid to avoid uneven concentration of the working fluid and affect the overall effect of the working fluid;
• The specific usage concentration and frequency of adding new working fluid will vary according to the on-site usage environment. Users should make adjustments based on their own actual conditions.

Storage and packaging

★ Store in a cool and ventilated place, away from sunlight and rain;

★ The shelf life is 12 months at room temperature and stored as general chemicals;

★ 15Kg/plastic barrel, 170Kg/iron barrel

Health and Environment

This product does not contain carcinogens such as nitrite and highly toxic substances such as phenols. Does not contain mineral oil, which is more conducive to environmental protection.

Other Information

For more information on environmental matters, health protection, fire protection matters, emergency protective measures, waste disposal and cargo transportation, please refer to the "Logistics Safety Data Sheet MSDS".