Medium Wire Cutting Fluid Environmentally Friendly Formula Can Process Thick

Product Specification

Product Description

This product is a fully synthetic and environmentally friendly wire cutting fluid. It uses an environmentally friendly formula and does not contain harmful ingredients such as chlorine, phenols and nitrites. It can replace traditional emulsions. It is used for wire EDM processing of various metal materials. It has good cleaning, cooling, lubrication and anti-rust properties. The cut surface of the processed products is bright, rust-free and easy to clean.

Applications

Suitable for medium wire EDM wire cutting processing.

Product Advantages

• Environmentally friendly formula, no odor after long-term use, harmless to operators and the environment;
• High processing efficiency and can process thick parts;
• Good cooling properties, can effectively reduce the processing temperature and avoid workpiece deformation during processing;
• Excellent lubrication, good smoothness of the processed surface, no streaks, and less molybdenum wire loss;
•  Good anti-rust, can effectively prevent machine tools and workpieces from rusting.

Typical Data

Recommended concentration ratio for use

Use the ratio 1:10-15. When cutting thick parts (200-500mm), the recommended ratio is 1:5, which can be adjusted according to the actual situation.

Note: The above are typical data and do not represent product indicators. Material safety data for the above products are available upon request. The above data can be used to obtain corresponding information on storage, safe handling and disposal. The above data has been tried to be as accurate as possible, but may change due to future recipe changes.

Precautions for use

1. When using it for the first time, the water tank and pipes of the equipment must be cleaned before adding new liquid;
2. Use clean tap water to prepare the solution. Do not let other chemicals contaminate the working fluid, otherwise it may affect the use effect of the product;
3. Regularly skimming off the floating dirt on the surface of the cutting fluid and adding new fluid can help extend the service life of the working fluid and ensure the processing effect;
4. When replenishing new working fluid, the water and original solution must be fully stirred evenly before adding to the water tank;
5. Regularly use a refractometer to detect the concentration of the working fluid. If the concentration becomes low, the concentration of the fluid must be appropriately increased before adding it to increase the concentration of the original working fluid;
6. Do not add water or original solution directly into the working fluid to avoid uneven concentration of the working fluid and affect the overall effect of the working fluid;
7. The specific usage concentration and frequency of adding new working fluid will vary according to the on-site usage environment. Users should make adjustments based on their own actual conditions.

Storage and packaging

Store in a cool and ventilated place, away from sunlight and rain;

The shelf life is 18 months at room temperature and stored as general chemicals;

15Kg/glue barrel.

Health and Environment

This product does not contain carcinogens such as nitrite and highly toxic substances such as phenols. Does not contain mineral oil, which is more conducive to environmental protection.

Other Information

For more information on environmental matters, health protection, fire protection matters, emergency protective measures, waste disposal and cargo transportation, please refer to the "Logistics Safety Data Sheet MSDS".