Weifang Donho Machinery Co.,Ltd
| Payment Terms | T/T |
| Supply Ability | 200 Sets Per Month |
| Delivery Time | 2 Weeks After Balance |
| Packaging Details | 1.Whole film packaging machine; 2.Anti-collision package edge; 3.Fumigation-free plywood wooden box with iron binding belt. |
| Alias | co2 laser equipment |
| Working Size | 1600 mm * 1000 mm |
| Positon accuracy | 0.01mm |
| Warranty | 12 months |
| Working environment | 0-45°C |
| Operating Humidity | 5-95% |
| Brand Name | Donho |
| Model Number | DHCL-1610 |
| Certification | CE, ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
80W Mini Co2 Laser Engraving Equipment For Stamp Making 600mmX400mm Working Size
1600 Mm X1000 Mm Co2 Laser Engraving Machine For Cutting Soft Materials
Industrial Laser Engraving Machine For Cloth / Leather / Paper / Acrylic Cutting
MDF / Acrylic Co2 Laser Tube Laser Engraving Machine With USD Off Line
Product Specification
| Payment Terms | T/T | Supply Ability | 200 Sets Per Month |
| Delivery Time | 2 Weeks After Balance | Packaging Details | 1.Whole film packaging machine; 2.Anti-collision package edge; 3.Fumigation-free plywood wooden box with iron binding belt. |
| Alias | co2 laser equipment | Working Size | 1600 mm * 1000 mm |
| Positon accuracy | 0.01mm | Warranty | 12 months |
| Working environment | 0-45°C | Operating Humidity | 5-95% |
| Brand Name | Donho | Model Number | DHCL-1610 |
| Certification | CE, ISO | Place of Origin | China |
| High Light | co2 laser engraving equipment ，industrial laser engraving machine | ||
Extended laser supply container Laser Engraving Equipment With USD Off-line For Wood Photo Printing
This type co2 laser engraving equipment adopts 150W -180W Reci laser tube, need extending suply container because length of tube is larger than weidth of machine. It could add a nest table above the blade table if you need cutting leather too.
| Model | DHCL-1610 |
| Laser Power | 150W -180W RECI laser tube |
| Working Area | 1600mm * 1000mm |
| Rails | PMI square rail |
| Control System | Ruida Control system |
| Motor and Driver | Leadshine stepper motor and driver |
| Lens and Mirrors | Singapore Wavelength lens and mirrors |
| Transmission | Belt transmission |
| Table Type | Blade table |
| Cooling System | Water chiller CW 5200 |
| Others | USB offline, Red point, Industrial, Air pump ACO-009 etc |
Features
1. Reci laser tube, has good engraving performance, can use 4mA current in the high-frequency pulse engraving of the laser tube in pre-ionization state;
2. Singapore imported lens and mirrors anti-reflection film, high-quality processing technology, high transmittance, stable performance;
3. The Fulong belt belt is made of high quality synthetic neoprene imported from Japan and is equipped with rubber accessories for various purposes. The skeleton material is made of high quality glass fiber rope imported from Japan; the toothed surface is protected by nylon 66 high elastic cloth. The product has good dynamic performance and crack resistance, excellent ozone performance, and also has the characteristics of aging resistance, heat resistance and wear resistance.
4. Leadshine stepper motor and driver, the CM series is a high-performance, lower-cost stepper motor made by Raytheon Smart with the latest Japanese design, the latest technology and imported core materials; CM series waterproof stepping motor, compared with the standard type, the rear end cover is redesigned, the lead wire is changed to waterproof connector, a new sealing material is added between the front and rear end caps and the fuselage, and the motor body is comprehensive. The waterproof treatment, the motor shaft end uses a high-quality oil seal, so that the protection level of the whole machine has reached IP65. It can be applied to all kinds of wet, drenched, outdoor, oil splashing occasions;
5. The blade table is suitable for hard materials engraving, it could bear high weight materials, made by stainless steel table with the bottom 15mm;
6. Inner part with optimized heat dissipation effect, rationalized placement of the electronic parts, Ensured system stability and anti jamming capability;
8. Cooling machine adopted Industrial water chiller CW-3000, install easier and could make sure better cooling system to extended working hours;
9. Leetro DSP real-time laser cutting control system
The custom layer process is better for customers to use, and the operation is more convenient; Realize the image automatic perfect net processing, the engraving effect is bette; Network communication can achieve wireless control and is more convenient;
10. Red Point
The red spot positioning lamp adopts imported laser diode and optical lens. Clear spot, low divergence, good collimation, small size, strong industrial applicability.
11. Welded machine body
adopts thermal quenching technology to remove stress and uses a large precision gantry milling machine to ensure accuracy;
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2010
Total Annual:
45000000-55000000
Employee Number:
50~60
Ecer Certification：
Active Member
Donho Group is a professional supplier for CNC solution, Integrate R&D, manufacturing, marketing, shipping and export services. Our main production are CNC router, CNC co2 laser cutting machine, CNC fiber laser marking machine, CNC fiber laser cutting machine, CNC plasma cutting machine and rela... Donho Group is a professional supplier for CNC solution, Integrate R&D, manufacturing, marketing, shipping and export services. Our main production are CNC router, CNC co2 laser cutting machine, CNC fiber laser marking machine, CNC fiber laser cutting machine, CNC plasma cutting machine and rela...
Get in touch with us
Leave a Message, we will call you back quickly!